Show Full Spec Comparison
| Yamaha RSP20 | PRS DW CE 24 Floyd | |
|---|---|---|
| General | ||
| Brand: | Yamaha | PRS |
| Year: | 2022 | 2020 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | Japan | United States |
| Series: | REVSTAR | Bolt-On |
| Colors: | Blue, Yellow Burst | Black, Blue, Brown Burst, Red Burst |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Top: Maple / Back: Chambered 2-Piece Mahogany, Carbon Reinforcement | Mahogany |
| Bridge: | Tune-O-Matic | Floyd Rose 1000 Tremolo w/ Locking Nut |
| Neck | ||
| Neck Joint: | Set | Bolt-On |
| Tuners: | Die-Cast | PRS Low Mass Locking |
| Fretboard: | Rosewood | Maple |
| Neck Material: | 3-Piece Mahogany, Carbon Reinforcement | Maple |
| Decoration: | Lines | Black Birds |
| Scale Size: | 24.75" | 25" |
| Shape: | Revstar C | Dustie Waring |
| Thickness: | 1st Fret: 0.827'' (21mm) - 12th Fret: 0.941'' (23.9mm) | 1st Fret: - 12th Fret: |
| Frets: | 22 Jumbo Stainless Steel | 24 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 12" | 10" |
| Nut: | Plastic | Locking |
| Nut Width: | 41.9mm (1.65'') | 42.1mm (1.656'') |
| Electronics | ||
| Bridge Pickups: | VH5b (Humbucker / Passive) | PRS Mojotone Tomahawk Gen 2 (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | VH5n (Humbucker / Passive) | PRS Mojotone Tomahawk Gen 2 (Humbucker / Passive) |
| Switch: | 5 Way | 5 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | Boost | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Black |
Show Diagrams Comparison
Reasons to Get
Yamaha RSP20 over PRS DW CE 24 Floyd
Reasons to Get
PRS DW CE 24 Floyd over Yamaha RSP20
Other Key Differences
Yamaha RSP20 vs PRS DW CE 24 Floyd
Shared Features
Yamaha RSP20 vs PRS DW CE 24 Floyd
Common Strengths
- From a High-Quality-Standards Country
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Yamaha RSP20 favors large hands more than the PRS DW CE 24 Floyd. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Yamaha RSP20:
PRS DW CE 24 Floyd:
Beginner Friendliness
Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Yamaha RSP20- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
PRS DW CE 24 Floyd- Comfortable shape
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Yamaha RSP20
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the PRS DW CE 24 Floyd
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Winner: Yamaha RSP20.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Yamaha RSP20 has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Yamaha RSP20.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Yamaha RSP20 comes with some kind of pickup modification: Boost.
A Boost will give your pickups more output, similar to an active pickup. It's great if you like to use a lot of output for heavy genres, but also like to use a cleaner tone often.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: PRS DW CE 24 Floyd.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Yamaha RSP20 compares to the PRS DW CE 24 Floyd.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Yamaha RSP20 is built in Japan while the PRS DW CE 24 Floyd is made in United States.
Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Yamaha RSP20 has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
On the other hand, the PRS DW CE 24 Floyd comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Winner: PRS DW CE 24 Floyd.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Yamaha RSP20 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Yamaha RSP20.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Yamaha RSP20's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the PRS DW CE 24 Floyd's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: PRS DW CE 24 Floyd.
Tuners
The PRS DW CE 24 Floyd has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Nevertheless, the PRS DW CE 24 Floyd has a locking nut, so it should have even better tune stability and doesn't need locking tuners.
Winner: PRS DW CE 24 Floyd.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Yamaha RSP20 has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the PRS DW CE 24 Floyd comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: PRS DW CE 24 Floyd.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Yamaha RSP20
- Stainless Steel Frets
- Made in Japan
- Expensive Wood
- Top Brand Pickups
- Boost Pickups
- Weight Relief
- No Locking Tuners
- No High-Quality Nut
- No Neck-Through Build
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
PRS DW CE 24 Floyd
- Locking Tuners
- Made in United States
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the PRS DW CE 24 Floyd has the wider nut with 42.1mm (1.656'') vs 41.9mm (1.65''). This is a 0.2mm (0.006'') difference
This means that it will be more difficult to do bar chords on the PRS DW CE 24 Floyd, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The PRS DW CE 24 Floyd has the longest scale: 25". The Yamaha RSP20 is only 24.75" long. This is a 0.25'' (6.4mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Yamaha RSP20 and the PRS DW CE 24 Floyd have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the PRS DW CE 24 Floyd's fingerboard radius is smaller, which means it's more curved than the Yamaha RSP20's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Yamaha RSP20.
Fret Size
The Yamaha RSP20 has Jumbo frets, which should be taller than the PRS DW CE 24 Floyd's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
