Swap
Swap
Yamaha PAC212VQM
Yamaha PAC112V
VS
Playability
70
Sound
66
Build
55
Value
74
Score
64
FIND IT ON:
Musician's Friend logoSweetwater logo
Playability
70
Sound
66
Build
57
Value
74
Score
64
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Add more to comparison

Yamaha PAC212VQM vs PAC112V

Reasons to Get
Yamaha PAC212VQM over PAC112V

Decorative Top
Quilted Maple vs None
Finished with beautiful natural wood patterns
Release Year
2011 vs 2010
From a more recent year

Reasons to Get
Yamaha PAC112V over PAC212VQM

Country of Manufacturing
Indonesia vs China
Built with higher quality standards

Other Key Differences
Yamaha PAC212VQM vs PAC112V

No Key Differences Found

Shared Features
Yamaha PAC212VQM vs PAC112V

Bridge Pickup
Alnico Humbucker
Same Bridge Pickup
Middle Pickup
Alnico Single Coil
Same Middle Pickup
Neck Pickup
Alnico Single Coil
Same Neck Pickup
Body Wood
Alder
Same Body Wood
Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Rosewood
Same Fretboard Wood
Headstock
6
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
5
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HSS
High output with beautiful cleans and tone versatility
Number of Frets
22
Same maximum octave
Neck Thickness at 1st Fret
0.823'' (20.9mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.902'' (22.9mm)
Same neck comfortability
Nut Width
1.614'' (41mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Tremolo
Simple vibratos without too much maintenance
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Fretboard Radius
13.78'' (350mm)
Same fretboard comfortability
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Pickup Alter Switch/Knob
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Locking Tuners
  • Stays in Tune (Evertune)
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 64 out of 100, which makes them similar in terms of quality.

The Yamaha PAC112V wins when it comes to build quality. On the other hand, the Yamaha PAC212VQM has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Yamaha PAC212VQM
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Yamaha PAC112V
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Yamaha PAC212VQM Overview

  • From Yamaha's 2011 Pacifica series
  • Made in China
  • 6 strings
  • 25.5"'' scale
  • 13.78" Fretboard Radius
  • Quilted Maple top
  • Maple/Alder/Quilted Maple Laminated body
  • Maple neck
  • Rosewood fretboard
  • Bridge pickup: Alnico Humbucker (Humbucker/Passive)
  • Middle pickup: Alnico Single Coil (Single Coil/Passive)
  • Neck pickup: Alnico Single Coil (Single Coil/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Vintage-Style Tremolo with Block Saddle bridge
  • Pacifica C Bolt-On neck
  • 22 Medium frets
  • Die-Cast tuners
  • Compare Specs >

Yamaha PAC112V Overview

  • From Yamaha's 2010 Pacifica series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 13.78" Fretboard Radius
  • Alder body
  • Maple neck
  • Rosewood fretboard
  • Bridge pickup: Alnico Humbucker (Humbucker/Passive)
  • Middle pickup: Alnico Single Coil (Single Coil/Passive)
  • Neck pickup: Alnico Single Coil (Single Coil/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Vintage-Style Tremolo with Block Saddle bridge
  • Pacifica C Bolt-On neck
  • 22 Medium frets
  • Die-Cast tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Rosewood wood pattern used for guitar building
Rosewood
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HSS. HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.

Pickups Quality

None of these use a specialized pickup brand for their pickups. Some of the best guitars on the market come with pickups from brands like EMG, Seymour Duncan, DiMarzio, etc. You might want to replace your pickups eventually if you want to get the best sound out of any of these instruments.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both offer you the same type of pickup mod: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

They both share the following switching options:

Yamaha PAC212VQM and Yamaha PAC112V pickups switch selector and push knobs diagram
Yamaha PAC212VQM and Yamaha PAC112V's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Tie.

Final Sound Quality Scores

Yamaha PAC212VQM
Pickups 60
Sustain 65
Versatility 80
Tuning Stability 60
Sound 66
Yamaha PAC112V
Pickups 60
Sustain 65
Versatility 80
Tuning Stability 60
Sound 66

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Yamaha PAC212VQM compares to the Yamaha PAC112V.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Yamaha PAC212VQM is built in China while the Yamaha PAC112V is made in Indonesia.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Yamaha PAC112V

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. Both come with Die-Cast.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Yamaha PAC212VQM
  • Expensive Wood
  • Coil Split Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Yamaha PAC112V
  • Expensive Wood
  • Coil Split Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Yamaha PAC212VQM
Quality of materials 50
Features 60
Quality Control 55
Build Quality 55
Yamaha PAC112V
Quality of materials 46
Features 60
Quality Control 65
Build Quality 57

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Yamaha PAC212VQM Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 41mm (1.614'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Yamaha PAC212VQM and Yamaha PAC112V's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Yamaha PAC212VQM Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Yamaha PAC212VQM and the Yamaha PAC112V have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Yamaha PAC212VQM Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Yamaha PAC212VQM and the Yamaha PAC112V have the same fretboard radius of 13.78". It's closer to the 12'' that most Les Paul guitars have, but it's a bit flatter. It'll make it easier to play single notes than chords, but it's still relatively comfortable for chords.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Yamaha PAC212VQM:
Big Hands
Small Hands
Yamaha PAC112V:
Big Hands
Small Hands

Fret Size

Yamaha PAC212VQM and Yamaha PAC112V Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Yamaha PAC212VQM
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 70
Playability 70
Yamaha PAC112V
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 70
Playability 70

Specs Side-by-Side

Yamaha PAC212VQM vs PAC112V
General Yamaha PAC212VQM PAC112V
Brand: Yamaha Yamaha
Year: 2011 2010
Configuration: HSS HSS
Strings: 6 6
Made in: China Indonesia
Series: Pacifica Pacifica
Colors: Sunburst, Black, Red White, Sunburst, Black, Blue, Red, Gray, Natural Satin
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Maple/Alder/Quilted Maple Laminated Alder
Bridge: Vintage-Style Tremolo with Block Saddle Vintage-Style Tremolo with Block Saddle
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: Die-Cast Die-Cast
Fretboard: Rosewood Rosewood
Neck Material: Maple Maple
Decoration: Dots Dots
Scale Size: 25.5" 25.5"
Shape: Pacifica C Pacifica C
Thickness: 1st Fret: 0.823'' (20.9mm) - 12th Fret: 0.902'' (22.9mm) 1st Fret: 0.823'' (20.9mm) - 12th Fret: 0.902'' (22.9mm)
Frets: 22 Medium Nickel Silver 22 Medium Nickel Silver
Fretboard Radius: 13.78" 13.78"
Nut: Plastic Plastic
Nut Width: 41mm (1.614'') 41mm (1.614'')
Electronics
Bridge Pickup: Alnico Humbucker (Humbucker / Passive) Alnico Humbucker (Humbucker / Passive)
Middle Pickup: Alnico Single Coil (Single Coil / Passive) Alnico Single Coil (Single Coil / Passive)
Neck Pickup: Alnico Single Coil (Single Coil / Passive) Alnico Single Coil (Single Coil / Passive)
Switch: 5 Way 5 Way
Knobs: Dome Dome
Pickup Mods: Coil Split Coil Split
Volume Controls: 1 1
Tone Controls: 1 1