Swap
Swap
Yamaha PAC1611MS
Jackson USA Select King V KV2
VS
Playability
72
Sound
72
Build
69
Value
66
Score
71
FIND IT ON:
Reverb logoSweetwater logo
Playability
77
Sound
79
Build
74
Value
62
Score
77
FIND IT ON:
Sweetwater logoReverb logoMusician's Friend logo
Add to Compare
Add to Compare
Side to side spec comparison >

Yamaha PAC1611MS vs Jackson USA Select King V KV2

Reasons to Get
Yamaha PAC1611MS over Jackson USA Select King V KV2

Number of Frets
22 vs 24
Warmer neck pickup
Type of Frets
Medium Jumbo vs Jumbo
You'll feel the fretboard when pressing down the strings
Neck Profile
PAC1611MS vs Speed
Comfortable neck that works for most people
Neck Thickness at 1st Fret
0.839'' (21.3mm) vs 0.775'' (19.7mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.906'' (23mm) vs 0.835'' (21.2mm)
More comfortable at higher frets for big hands
Nut Width
1.594'' (40.5mm) vs 1.688'' (42.9mm)
Favors small hands, easier bar chords and other shapes
Bridge
Fixed vs Floyd Rose
Good sustain and needs no set-up
Value Score
66 vs 62
Better price/quality relationship

Reasons to Get
Jackson USA Select King V KV2 over Yamaha PAC1611MS

Release Year
2020 vs 2014
From a more recent year
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Compound Radius
12" to 16" vs 7.25"
Balanced playability for chords and single-notes
Neck Profile
Speed vs PAC1611MS
Thin and flat neck for playing fast
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.775'' (19.7mm) vs 0.839'' (21.3mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.835'' (21.2mm) vs 0.906'' (23mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.594'' (40.5mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Floyd Rose vs Fixed
Allows intense vibratos and techniques like Dive Bombs

Other Key Differences
Yamaha PAC1611MS vs Jackson USA Select King V KV2

Bridge Pickup
Seymour Duncan STHR-1b vs Seymour Duncan JB TB-4
Different Bridge Pickup
Body Wood
Ash vs Alder
Different Body Wood
Fretboard Wood
Maple vs Ebony
Different Fretboard Wood
Nut Material
Bone vs Locking
Different Nut Material

Shared Features
Yamaha PAC1611MS vs Jackson USA Select King V KV2

Neck Pickup
Seymour Duncan '59 SH-1N
Same Neck Pickup
Neck Wood
Maple
Same Neck Wood
Headstock
6
Same Headstock
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed

Common Strengths

  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Jackson USA Select King V KV2 is probably the better product overall with its final score of 77 compared to the Yamaha PAC1611MS's 71 score, although not by a lot.

The Jackson USA Select King V KV2 wins when it comes to sound, playability, build quality. On the other hand, the Yamaha PAC1611MS has the upper hand when it comes to value for the money.

If you got small hands, you'll probably feel more comfortable playing the Jackson USA Select King V KV2.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Yamaha PAC1611MS is the better choice.

The Yamaha PAC1611MS meets 5 out of our 8 criteria items for beginner friendliness, while the Jackson USA Select King V KV2 meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Yamaha PAC1611MS
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Jackson USA Select King V KV2
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Yamaha PAC1611MS Overview

  • From Yamaha's 2014 Signature series
  • Mike Stern Signature
  • Made in Japan
  • 6 strings
  • 25.5"'' scale
  • 7.25" Fretboard Radius
  • Light Ash body
  • Maple neck
  • One-Piece Maple fretboard
  • Bridge pickup: Seymour Duncan STHR-1b (Humbucker/Passive)
  • Neck pickup: Seymour Duncan '59 SH-1N (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • 6-Saddle Hardtail bridge
  • PAC1611MS Bolt-On neck
  • 22 Medium Jumbo frets
  • Gotoh SD91-05M-L tuners
  • Compare Specs >

Jackson USA Select King V KV2 Overview

  • From Jackson's 2020 USA Select series
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Alder body
  • Quartersawn Maple neck
  • Ebony fretboard
  • Bridge pickup: Seymour Duncan JB TB-4 (Humbucker/Passive)
  • Neck pickup: Seymour Duncan '59 SH-1N (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose Original Double-Locking Tremolo bridge
  • Speed Neck-Through neck
  • 24 Jumbo frets
  • Jackson Sealed Die-Cast tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Woods Used in the Yamaha PAC1611MS

Ash wood pattern used for guitar building
Ash

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Woods Used in the Jackson USA Select King V KV2

Ebony wood pattern used for guitar building
Ebony
Alder wood pattern used for guitar building
Alder

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Yamaha PAC1611MS has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

You can purchase similar pickups to the Yamaha PAC1611MS's and use them on any guitar:

We found the same or similar pickups to the Jackson USA Select King V KV2's online:

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Yamaha PAC1611MS.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

They both share the following switching options:

Yamaha PAC1611MS and Jackson USA Select King V KV2 pickups switch and push knobs diagram
Yamaha PAC1611MS and Jackson USA Select King V KV2's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Jackson USA Select King V KV2.

Final Sound Quality Scores

Yamaha PAC1611MS
Pickups 90
Sustain 75
Versatility 54
Tuning Stability 70
Sound 72
Jackson USA Select King V KV2
Pickups 85
Sustain 80
Versatility 64
Tuning Stability 85
Sound 79

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Yamaha PAC1611MS compares to the Jackson USA Select King V KV2.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Yamaha PAC1611MS is built in Japan while the Jackson USA Select King V KV2 is made in United States.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Yamaha PAC1611MS has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Jackson USA Select King V KV2 comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Yamaha PAC1611MS's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Jackson USA Select King V KV2's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Jackson USA Select King V KV2.

Tuners

Both come with regular tuners. The Yamaha PAC1611MS's are Gotoh SD91-05M-L while the Jackson USA Select King V KV2's are Jackson Sealed Die-Cast

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Yamaha PAC1611MS has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Jackson USA Select King V KV2 comes with Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

Winner: Jackson USA Select King V KV2.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Yamaha PAC1611MS
  • Made in Japan
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Jackson USA Select King V KV2
  • Made in United States
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Tremolo
  • Compound Radius Fretboard
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No 21:1 Tuner Ratio
  • No Retainer Bar
  • No Strap Lock

Final Build Quality Scores

Yamaha PAC1611MS
Quality of materials 66
Features 50
Quality Control 90
Build Quality 69
Jackson USA Select King V KV2
Quality of materials 41
Features 80
Quality Control 100
Build Quality 74

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Yamaha PAC1611MS Nut Width
Yamaha PAC1611MS Nut Width
Jackson USA Select King V KV2 Nut Width
Jackson USA Select King V KV2 Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Jackson USA Select King V KV2 has the wider nut with 42.9mm (1.688'') vs 40.5mm (1.594''). This is a 2.4mm (0.094'') difference

This means that it will be more difficult to do bar chords on the Jackson USA Select King V KV2, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Yamaha PAC1611MS and Jackson USA Select King V KV2's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Yamaha PAC1611MS Neck Profile
Yamaha PAC1611MS's neck profile
Jackson USA Select King V KV2 Neck Profile
Jackson USA Select King V KV2's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Yamaha PAC1611MS has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The Jackson USA Select King V KV2, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

Fretboard Radius

Yamaha PAC1611MS Fingerboard Radius
Yamaha PAC1611MS's Fingerboard radius
Jackson USA Select King V KV2 Fretboard Compound Radius
Jackson USA Select King V KV2's Compound Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Jackson USA Select King V KV2 is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Yamaha PAC1611MS favors large hands more than the Jackson USA Select King V KV2.

Yamaha PAC1611MS:
Big Hands
Small Hands
Jackson USA Select King V KV2:
Big Hands
Small Hands

Fret Size

Yamaha PAC1611MS Frets Size
Yamaha PAC1611MS's Frets Size
Jackson USA Select King V KV2 Frets Size
Jackson USA Select King V KV2's Frets Size

The Jackson USA Select King V KV2 has Jumbo frets, which should be taller than the Yamaha PAC1611MS's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Yamaha PAC1611MS
Bending & Vibrato Ease 65
Chord Playability 90
Solo Playability 60
Playability 72
Jackson USA Select King V KV2
Bending & Vibrato Ease 70
Chord Playability 60
Solo Playability 100
Playability 77

Specs Side-by-Side

Yamaha PAC1611MS vs Jackson USA Select King V KV2
General Yamaha PAC1611MS Jackson USA Select King V KV2
Brand: Yamaha Jackson
Year: 2014 2020
Configuration: HH HH
Strings: 6 6
Made in: Japan United States
Series: Signature USA Select
Colors: Natural White, Black
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Light Ash Alder
Bridge: 6-Saddle Hardtail Floyd Rose Original Double-Locking Tremolo
Neck
Neck Joint: Bolt-On Neck-Through
Tuners: Gotoh SD91-05M-L Jackson Sealed Die-Cast
Fretboard: One-Piece Maple Ebony
Neck Material: Maple Quartersawn Maple
Decoration: Dots Mother of Pearl Sharkfin
Scale Size: 25.5" 25.5"
Shape: PAC1611MS Speed
Thickness: 1st Fret: 0.839'' (21.3mm) - 12th Fret: 0.906'' (23mm) 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm)
Frets: 22 Medium Jumbo Nickel Silver 24 Jumbo Nickel Silver
Fretboard Radius: 7.25" 12" to 16"
Nut: Bone Locking
Nut Width: 40.5mm (1.594'') 42.9mm (1.688'')
Electronics
Bridge Pickup: Seymour Duncan STHR-1b (Humbucker / Passive) Seymour Duncan JB TB-4 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Seymour Duncan '59 SH-1N (Humbucker / Passive) Seymour Duncan '59 SH-1N (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 1 1