Swap
Swap
Yamaha FGX830C
Yamaha FGX800C
VS
Playability
73
Sound
85
Build
67
Value
85
Score
75
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Playability
73
Sound
85
Build
67
Value
85
Score
75
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Add more to comparison

Yamaha FGX830C vs FGX800C

Reasons to Get
Yamaha FGX830C over FGX800C

Reasons to Get
Yamaha FGX800C over FGX830C

Other Key Differences
Yamaha FGX830C vs FGX800C

Back Material
Rosewood vs Okoume
Different Back Material
Sides Material
Rosewood vs Okoume
Different Sides Material
Bridge Material
Rosewood vs Walnut
Different Bridge Material
Fretboard Wood
Rosewood vs Walnut
Different Fretboard Wood

Shared Features
Yamaha FGX830C vs FGX800C

Saddle Material
Plastic
Same Saddle Material
Body Wood
Spruce
Same Body Wood
Neck Wood
Nato
Same Neck Wood
Headstock
3-3
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Nut Width
1.693'' (43mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
25.6'' (650.2mm)
Same string tension and fret separation
Fretboard Radius
15.75'' (400.1mm)
Same fretboard comfortability
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Pickup Alter Switch/Knob

Common Weaknesses

  • Solid Side Wood
  • Solid Back Wood
  • Locking Tuners
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 75 out of 100, which makes them similar in terms of quality.

The Yamaha FGX800C wins when it comes to. On the other hand, the Yamaha FGX830C has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Yamaha FGX830C
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Yamaha FGX800C
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Yamaha FGX830C Overview

  • From Yamaha's 2016 FG / FGX series
  • Made in China
  • 6 strings
  • 25.6"'' scale
  • 15.75" Fretboard Radius
  • Solid Spruce top
  • Rosewood back
  • Rosewood sides
  • Nato neck
  • Rosewood fretboard
  • Bridge pickup: SYSTEM66 + SRT Piezo Pickup (Preamp/Active)
  • Rosewood bridge
  • Acoustic C Set neck
  • 20 Medium frets
  • Die-Cast Chrome (TM29T) tuners
  • Compare Specs >

Yamaha FGX800C Overview

  • From Yamaha's 2016 FG / FGX series
  • Made in China
  • 6 strings
  • 25.6"'' scale
  • 15.75" Fretboard Radius
  • Solid Spruce top
  • Nato/Okoume back
  • Nato/Okoume sides
  • Nato neck
  • Walnut fretboard
  • Bridge pickup: SYSTEM66 + SRT Piezo Pickup (Preamp/Active)
  • Walnut bridge
  • Acoustic C Set neck
  • 20 Medium frets
  • Die-Cast Chrome (TM29T) tuners
  • Weight between 4.3lbs (2kgs) and 4.6lbs (2.1kgs)
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Nato wood pattern used for guitar building
Nato
Spruce wood pattern used for guitar building
Spruce

Nato a hard and dense wood similar to Mahogany, but cheaper and not quite as hard. Tone-wise, it's also similar, but it doesn't have quite the same attack as Mahogany.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Woods Used in the Yamaha FGX830C

Rosewood wood pattern used for guitar building
Rosewood

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Yamaha FGX800C

Walnut wood pattern used for guitar building
Walnut
Okoume wood pattern used for guitar building
Okoume

It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.

Okoume is an affordable wood and one of the first to replace Mahogany when the prohibitions started. It's generally softer than Mahogany and the tone has warmer lows.

Winner: Yamaha FGX830C.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Yamaha FGX830C
Sustain 80
Versatility 95
Tuning Stability 65
Sound 85
Yamaha FGX800C
Sustain 80
Versatility 95
Tuning Stability 65
Sound 85

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Yamaha FGX830C compares to the Yamaha FGX800C.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. Both come with Die-Cast Chrome (TM29T).

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Yamaha FGX830C
  • Expensive Wood
  • Electronics
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • No Top Brand Pickups
  • Low-Quality Material Saddle
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Yamaha FGX800C
  • Electronics
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No High-Quality Nut
  • No Top Brand Pickups
  • Low-Quality Material Saddle
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Yamaha FGX830C
Quality of materials 66
Features 80
Quality Control 55
Build Quality 67
Yamaha FGX800C
Quality of materials 66
Features 80
Quality Control 55
Build Quality 67

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Yamaha FGX830C Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').

This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Scale Length

Yamaha FGX830C and Yamaha FGX800C's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.6".

It's very similar to a typical long 25.5" guitar scale, but with an extra inch probably to compensate the saddle position in acoustic guitars. It should be pretty much the same as a 25.5" scale guitar.

It will allow you to strum hard without hearing so much fret buzz, even with lower tunings.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Yamaha FGX830C Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Yamaha FGX830C and the Yamaha FGX800C have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Yamaha FGX830C Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Yamaha FGX830C and the Yamaha FGX800C have the same fretboard radius of 15.75". It's a radius that makes playing single notes (and bending, vibrato, sliding, etc) easier than on a classic Les Paul guitar. However, it's still more curved than some baritone and 7+ strings guitars.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Yamaha FGX830C:
Big Hands
Small Hands
Yamaha FGX800C:
Big Hands
Small Hands

Fret Size

Yamaha FGX830C and Yamaha FGX800C Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Yamaha FGX830C
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73
Yamaha FGX800C
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73

Specs Side-by-Side

Yamaha FGX830C vs FGX800C
General Yamaha FGX830C FGX800C
Brand: Yamaha Yamaha
Year: 2016 2016
Strings: 6 6
Made in: China China
Series: FG / FGX FG / FGX
Colors: Natural Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Spruce Solid Spruce
Sides Material: Rosewood Okoume
Back Material: Rosewood Okoume
Bridge: Rosewood Walnut
Neck
Neck Joint: Set Set
Tuners: Die-Cast Chrome (TM29T) Die-Cast Chrome (TM29T)
Fretboard: Rosewood Walnut
Neck Material: Nato Nato
Decoration: Dots Dots
Scale Size: 25.6" 25.6"
Shape: Acoustic C Acoustic C
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 15.75" 15.75"
Nut: Plastic Plastic
Nut Width: 43mm (1.693'') 43mm (1.693'')
Electronics
Bridge Pickup: SYSTEM66 + SRT Piezo Pickup (Preamp / Active) SYSTEM66 + SRT Piezo Pickup (Preamp / Active)