Yamaha FGX820C vs Martin 000C12-16E Nylon
Reasons to Get
Yamaha FGX820C over Martin 000C12-16E Nylon
Reasons to Get
Martin 000C12-16E Nylon over Yamaha FGX820C
Other Key Differences
Yamaha FGX820C vs Martin 000C12-16E Nylon
Shared Features
Yamaha FGX820C vs Martin 000C12-16E Nylon
Common Strengths
- Solid Top Wood
- Expensive Wood
Common Weaknesses
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Martin 000C12-16E Nylon is probably the better product overall with its final score of 82 compared to the Yamaha FGX820C's 75 score, although not by a lot.
The Martin 000C12-16E Nylon wins when it comes to sound, build quality. On the other hand, the Yamaha FGX820C has the upper hand when it comes to value for the money.
If you got small hands, none of these instruments will make a big difference when it comes to comfortability.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Martin 000C12-16E Nylon is the better choice.
The Martin 000C12-16E Nylon meets 5 out of our 8 criteria items for beginner friendliness, while the Yamaha FGX820C meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Yamaha FGX820C- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
New Player Friendliness
Martin 000C12-16E Nylon- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Soft Strings
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Yamaha FGX820C Overview
- From Yamaha's 2016 FG / FGX series
- Made in China
- 6 strings
- 25.6"'' scale
- 15.75" Fretboard Radius
- Solid Spruce top
- Mahogany back
- Mahogany sides
- Nato neck
- Rosewood or Walnut fretboard
- Bridge pickup: SYSTEM66 + SRT Piezo Pickup (Preamp/Active)
- Rosewood or Walnut bridge
- Acoustic C Set neck
- 20 Medium frets
- Die-Cast Chrome (TM29T) tuners
- Compare Specs >
Martin 000C12-16E Nylon Overview
- From Martin's 2020 16-17 series
- Made in United States
- 6 strings
- 26.5"'' scale
- 18" Fretboard Radius
- Solid Spruce top
- Solid Mahogany back
- Solid Mahogany sides
- Select Hardwood neck
- Ebony fretboard
- Bridge pickup: Fishman Matrix VT Enhance NT1 (Preamp/Active)
- Ebony bridge
- Acoustic Low Profile Set neck
- 20 Medium frets
- Gold Side Mount tuners
- Weight around 4.05lbs (1.8kgs)
- Compare Specs >
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Yamaha FGX820C
Nato a hard and dense wood similar to Mahogany, but cheaper and not quite as hard. Tone-wise, it's also similar, but it doesn't have quite the same attack as Mahogany.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Martin 000C12-16E Nylon
Hardwood is just a generic wood that can come from many species. This type of wood is used to build guitars because it provides a rich, warm sound. The wood also has good structural properties, making it durable and long-lasting.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Winner: Tie.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Yamaha FGX820C compares to the Martin 000C12-16E Nylon.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Yamaha FGX820C is built in China while the Martin 000C12-16E Nylon is made in United States.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Martin 000C12-16E Nylon
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Yamaha FGX820C has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
On the other hand, the Martin 000C12-16E Nylon comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Martin 000C12-16E Nylon.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Yamaha FGX820C's are Die-Cast Chrome (TM29T) while the Martin 000C12-16E Nylon's are Gold Side Mount
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Yamaha FGX820C
- Expensive Wood
- Electronics
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- No Top Brand Pickups
- Low-Quality Material Saddle
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Martin 000C12-16E Nylon
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Electronics
- Ivory Tusq Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Martin 000C12-16E Nylon has the wider nut with 47.6mm (1.875'') vs 43mm (1.693''). This is a 4.6mm (0.182'') difference
This means that it will be more difficult to do bar chords on the Martin 000C12-16E Nylon, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Martin 000C12-16E Nylon has the longest scale: 26.5". The Yamaha FGX820C is only 25.6" long. This is a 0.9'' (22.9mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Yamaha FGX820C and the Martin 000C12-16E Nylon have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Yamaha FGX820C's fingerboard radius is smaller, which means it's more curved than the Martin 000C12-16E Nylon's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Martin 000C12-16E Nylon.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .
Yamaha FGX820C:
Martin 000C12-16E Nylon:
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
