Swap
Swap
Yamaha CG182C
Yamaha NCX3
VS
Playability
73
Sound
79
Build
62
Value
76
Score
71
FIND IT ON:
Amazon logoMusician's Friend logoSweetwater logo
Playability
73
Sound
84
Build
70
Value
76
Score
76
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Add more to comparison

Yamaha CG182C vs NCX3

Reasons to Get
Yamaha CG182C over NCX3

Reasons to Get
Yamaha NCX3 over CG182C

Release Year
2020 vs 2013
From a more recent year
Sides Wood
Solid vs Laminated
Helps with richer tones and louder volume
Back Wood
Solid vs Laminated
Helps with richer tones and louder volume

Other Key Differences
Yamaha CG182C vs NCX3

Back Material
Rosewood vs Walnut
Different Back Material
Sides Material
Rosewood vs Walnut
Different Sides Material
Bridge Material
Rosewood vs Ebony + Walnut
Different Bridge Material
Body Wood
Cedar vs Spruce
Different Body Wood
Neck Wood
Nato vs Mahogany
Different Neck Wood

Shared Features
Yamaha CG182C vs NCX3

Saddle Material
Plastic
Same Saddle Material
Fretboard Wood
Ebony
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
Plastic
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Nut Width
2.047'' (52mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
25.6'' (650.2mm)
Same string tension and fret separation
Fretboard Radius
Flat
Same fretboard comfortability
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Yamaha NCX3 is probably the better product overall with its final score of 76 compared to the Yamaha CG182C's 71 score, although not by a lot.

The Yamaha NCX3 wins when it comes to sound, build quality. On the other hand, the Yamaha CG182C has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Yamaha CG182C
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Soft Strings
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

New Player Friendliness

Yamaha NCX3
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Soft Strings
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Yamaha CG182C Overview

  • From Yamaha's 2013 CG & CGX Classical Guitars series
  • Made in China
  • 6 strings
  • 25.6"'' scale
  • Flat Fretboard Radius
  • Solid western red cedar top
  • Rosewood back
  • Rosewood sides
  • Nato neck
  • Ebony fretboard
  • Bridge pickup: (/)
  • Rosewood bridge
  • Acoustic C Set neck
  • 20 Medium frets
  • Gold tuners
  • Compare Specs >

Yamaha NCX3 Overview

  • From Yamaha's 2020 NX series
  • Made in China
  • 6 strings
  • 25.6"'' scale
  • Flat Fretboard Radius
  • Solid Sitka Spruce top
  • Solid Walnut back
  • Solid Walnut sides
  • African Mahogany neck
  • Ebony fretboard
  • Bridge pickup: Atmosfeel (Undersaddle Pickup + Contact Sensor + Mic) (Preamp/Active)
  • Ebony + Walnut bridge
  • Acoustic C Set neck
  • 20 Medium frets
  • Gold w/ Matte Black Shaft (RM1388NB-B06) tuners
  • Weight between 3.95lbs (1.8kgs) and 4.3lbs (2kgs)
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Ebony wood pattern used for guitar building
Ebony

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Yamaha CG182C

Nato wood pattern used for guitar building
Nato
Cedar wood pattern used for guitar building
Cedar
Rosewood wood pattern used for guitar building
Rosewood

Nato a hard and dense wood similar to Mahogany, but cheaper and not quite as hard. Tone-wise, it's also similar, but it doesn't have quite the same attack as Mahogany.

This is a softwood that is commonly used for acoustic guitars. It's known for its warm tone with strong overtones. However, there are many species so the tone and look can vary a lot.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Yamaha NCX3

Mahogany wood pattern used for guitar building
Mahogany
Spruce wood pattern used for guitar building
Spruce
Walnut wood pattern used for guitar building
Walnut

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.

Winner: Tie.

Electronics

The Yamaha NCX3 comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.

Winner:Yamaha NCX3.

Final Sound Quality Scores

Yamaha CG182C
Sustain 70
Versatility 80
Tuning Stability 65
Sound 79
Yamaha NCX3
Sustain 85
Versatility 85
Tuning Stability 65
Sound 84

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Yamaha CG182C compares to the Yamaha NCX3.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Yamaha CG182C's are Gold while the Yamaha NCX3's are Gold w/ Matte Black Shaft (RM1388NB-B06)

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Yamaha CG182C
  • Expensive Wood
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • No Top Brand Pickups
  • No Electronics
  • Low-Quality Material Saddle
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Yamaha NCX3
  • Expensive Wood
  • Electronics
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • No Top Brand Pickups
  • Low-Quality Material Saddle
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Yamaha CG182C
Quality of materials 61
Features 65
Quality Control 60
Build Quality 62
Yamaha NCX3
Quality of materials 71
Features 75
Quality Control 65
Build Quality 70

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Yamaha CG182C Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 52mm (2.047'').

This is considered a wide width for a 6-string guitar. It gives your fingers the extra space you need to play without muting accidentally, but this also makes bar chords harder to perform, especially if you have small hands.

Scale Length

Yamaha CG182C and Yamaha NCX3's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.6".

It's very similar to a typical long 25.5" guitar scale, but with an extra inch probably to compensate the saddle position in acoustic guitars. It should be pretty much the same as a 25.5" scale guitar.

It will allow you to strum hard without hearing so much fret buzz, even with lower tunings.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Yamaha CG182C Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Yamaha CG182C and the Yamaha NCX3 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Yamaha CG182C Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Yamaha CG182C and the Yamaha NCX3 have the same fretboard radius of Flat. This is common mostly in classical guitars since the strings are soft and have lower tension, so there's no need for a radius. Also, it's perfect for fingerstyle and more technical play.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison are balanced for most hand sizes.

Yamaha CG182C:
Big Hands
Small Hands
Yamaha NCX3:
Big Hands
Small Hands

Fret Size

Yamaha CG182C and Yamaha NCX3 Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Yamaha CG182C
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73
Yamaha NCX3
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73

Specs Side-by-Side

Yamaha CG182C vs NCX3
General Yamaha CG182C NCX3
Brand: Yamaha Yamaha
Year: 2013 2020
Strings: 6 6
Made in: China China
Series: CG & CGX Classical Guitars NX
Colors: Natural Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid western red cedar Solid Sitka Spruce
Sides Material: Rosewood Walnut
Back Material: Rosewood Walnut
Bridge: Rosewood Ebony + Walnut
Neck
Neck Joint: Set Set
Tuners: Gold Gold w/ Matte Black Shaft (RM1388NB-B06)
Fretboard: Ebony Ebony
Neck Material: Nato African Mahogany
Decoration:
Scale Size: 25.6" 25.6"
Shape: Acoustic C Acoustic C
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: Flat Flat
Nut: Plastic Plastic
Nut Width: 52mm (2.047'') 52mm (2.047'')
Electronics
Bridge Pickup: Atmosfeel (Undersaddle Pickup + Contact Sensor + Mic) (Preamp / Active)