Show Full Spec Comparison
| Washburn D10S | Fender CD-60 Dreadnought V3 DS | |
|---|---|---|
| General | ||
| Brand: | Washburn | Fender |
| Year: | 2018 | 2022 |
| Strings: | 6 | 6 |
| Made in: | China | Indonesia |
| Series: | Heritage | Classic Design |
| Colors: | Natural | Black |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Solid Sitka Spruce | Spruce |
| Sides Material: | Mahogany | Mahogany |
| Back Material: | Mahogany | Mahogany |
| Bridge: | Ovangkol | Walnut |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Chrome Diecast | Die-Cast |
| Fretboard: | Ovangkol | Walnut |
| Neck Material: | Satin Mahogany with 2 way Trussrod | Mahogany |
| Decoration: | Dots | White Pearloid Dot |
| Scale Size: | 25.3" | 25.3" |
| Shape: | Acoustic Washburn Heritage | Acoustic C Shape |
| Frets: | 20 Medium Nickel Silver | 20 Medium Nickel Silver |
| Fretboard Radius: | 12" | 12" |
| Nut: | NuBone | NuBone |
| Nut Width: | 43mm (1.693'') | 43mm (1.693'') |
| Electronics | ||
| Pickups: | ||
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Chrome |
Reasons to Get
Washburn D10S over Fender CD-60 Dreadnought V3 DS
Reasons to Get
Fender CD-60 Dreadnought V3 DS over Washburn D10S
Other Key Differences
Washburn D10S vs Fender CD-60 Dreadnought V3 DS
Shared Features
Washburn D10S vs Fender CD-60 Dreadnought V3 DS
Common Strengths
- High-Quality Nut
- Expensive Wood
Common Weaknesses
- Solid Side Wood
- Solid Back Wood
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- Top Pickup Brand
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Washburn D10S:
Fender CD-60 Dreadnought V3 DS:
Beginner Friendliness
Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Washburn D10S- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
New Player Friendliness
Fender CD-60 Dreadnought V3 DS- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Woods Used in the Washburn D10S
Ovangkol is a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range. Find out more about Ovangkol.
Woods Used in the Fender CD-60 Dreadnought V3 DS
It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.
Winner: Tie.
Electronics
Neither of them come with electronics that allow you to connect them to an amp. This makes them completely acoustic, so you'll need to use an external mic to record with them or play live.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Washburn D10S compares to the Fender CD-60 Dreadnought V3 DS.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Washburn D10S is built in China while the Fender CD-60 Dreadnought V3 DS is made in Indonesia.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Fender CD-60 Dreadnought V3 DS
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have NuBone nuts. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Washburn D10S's are Chrome Diecast while the Fender CD-60 Dreadnought V3 DS's are Die-Cast
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Washburn D10S
- Expensive Wood
- NuBone Nut
- NuBone Saddle
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Top Brand Pickups
- No Electronics
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender CD-60 Dreadnought V3 DS
- Expensive Wood
- NuBone Nut
- NuBone Saddle
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Top Brand Pickups
- No Electronics
- Laminated Top Wood
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.3".
This is considered a long scale, but slightly shorter than what's commonly found in acoustic guitars.
Since the distance between bridge and nut is relatively long, strings will feel stiff and more difficult to bend, but the tone will feel brighter. It will also be less likely to produce fret buzzing and rattling when strumming hard.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Washburn D10S and the Fender CD-60 Dreadnought V3 DS have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Washburn D10S and the Fender CD-60 Dreadnought V3 DS have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
