Show Full Spec Comparison
| Taylor GTe Mahogany | GTe Blacktop | |
|---|---|---|
| General | ||
| Brand: | Taylor | Taylor |
| Year: | 2022 | 2022 |
| Strings: | 6 | 6 |
| Made in: | United States | United States |
| Series: | GT | GT |
| Colors: | Natural | Natural |
| Left-Handed Version: | Yes | Yes |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Solid Tropical Mahogany | Solid Sitka Spruce |
| Sides Material: | Mahogany | Walnut |
| Back Material: | Mahogany | Walnut |
| Bridge: | Eucalyptus | Eucalyptus |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Taylor Nickel Mini | Taylor Nickel Mini |
| Fretboard: | Eucalyptus | Eucalyptus |
| Neck Material: | Tropical Mahogany | Tropical Mahogany |
| Decoration: | 4mm Dot Italian Acrylic | 4mm Dot Italian Acrylic |
| Scale Size: | 24.125" | 24.125" |
| Shape: | Acoustic Taylor Standard | Acoustic Taylor Standard |
| Frets: | 20 Medium Nickel Silver | 20 Medium Nickel Silver |
| Fretboard Radius: | 15" | 15" |
| Nut: | Black Tusq XL | Ivory Tusq |
| Nut Width: | 43.4mm (1.71'') | 43.4mm (1.71'') |
| Electronics | ||
| Pickups: | Expression System 2 Electronics (Preamp / Active) | Expression System 2 Electronics (Preamp / Active) |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Nickel | Nickel |
Reasons to Get
Taylor GTe Mahogany over GTe Blacktop
Reasons to Get
Taylor GTe Blacktop over GTe Mahogany
Other Key Differences
Taylor GTe Mahogany vs GTe Blacktop
Shared Features
Taylor GTe Mahogany vs GTe Blacktop
Common Strengths
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- High-Quality Nut
- From a High-Quality-Standards Country
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- Top Pickup Brand
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
Taylor GTe Mahogany Prices
Taylor GTe Blacktop Prices
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Taylor GTe Mahogany:
Taylor GTe Blacktop:
Beginner Friendliness
Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Taylor GTe Mahogany- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Short scale
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Soft Strings
- Locking tuners
New Player Friendliness
Taylor GTe Blacktop- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Short scale
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Eucalyptus is not a common tonewood, but it's becoming more popular recently. There are many species around the world, each with its own characteristic, so it's hard to describe the tone it produces without knowing the exact species.
Woods Used in the Taylor GTe Blacktop
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.
Winner: Tie.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Taylor GTe Mahogany compares to the Taylor GTe Blacktop.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Taylor GTe Mahogany has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Taylor GTe Blacktop comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. Both come with Taylor Nickel Mini.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Taylor GTe Mahogany
- Made in United States
- Expensive Wood
- Black Tusq XL Nut
- Electronics
- Synthetic Bone Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Top Brand Pickups
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Taylor GTe Blacktop
- Made in United States
- Expensive Wood
- Ivory Tusq Nut
- Electronics
- Ivory Tusq Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Top Brand Pickups
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43.4mm (1.71'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 24.125".
This is a slightly shorter scale than the more common short scale of 24.75". It's a good choice for beginners that want to get an easier-to-play guitar without it being much different than a normal scale guitar.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Taylor GTe Mahogany and the Taylor GTe Blacktop have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Taylor GTe Mahogany and the Taylor GTe Blacktop have the same fretboard radius of 15". This radius y closer to the 12'' that most Les Paul guitars have, but a bit flatter. It'll make it easier to play single notes than chords, but it's still comfortable for playing chords without muting strings.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
