Swap
Swap
Taylor Baby Mahogany BT2e
Taylor Builder's Edition 912ce
VS
Playability
78
Sound
81
Build
72
Value
82
Score
77
FIND IT ON:
Sweetwater logoAmazon logo
Playability
77
Sound
86
Build
89
Value
69
Score
84
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add more to comparison

Taylor Baby Mahogany BT2e vs Builder's Edition 912ce

Reasons to Get
Taylor Baby Mahogany BT2e over Builder's Edition 912ce

Nut Width
1.688'' (42.9mm) vs 1.75'' (44.5mm)
Favors small hands, easier bar chords and other shapes
Body Shape
Dreadnought Mini vs Grand Concert
Dreadnought but much smaller and shallower
Scale Length
22.75'' (577.9mm) vs 24.9'' (632.5mm)
Easier bending, shorter fret separation and warmer natural tone
Value Score
82 vs 69
Better price/quality relationship

Reasons to Get
Taylor Builder's Edition 912ce over Baby Mahogany BT2e

Country of Manufacturing
United States vs Mexico
Built with higher quality standards
Release Year
2020 vs 2014
From a more recent year
Sides Wood
Solid vs Laminated
Helps with richer tones and louder volume
Back Wood
Solid vs Laminated
Helps with richer tones and louder volume
Number of Frets
20 vs 19
Allows to reach higher notes
Nut Width
1.75'' (44.5mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Body Shape
Grand Concert vs Dreadnought Mini
Slightly larger than the Concert body with a strong mid-range
Scale Length
24.9'' (632.5mm) vs 22.75'' (577.9mm)
Lower action and brighter natural tone

Other Key Differences
Taylor Baby Mahogany BT2e vs Builder's Edition 912ce

Back Material
Sapele vs Rosewood
Different Back Material
Sides Material
Sapele vs Rosewood
Different Sides Material
Body Wood
Mahogany vs Spruce
Different Body Wood
Nut Material
NuBone vs Ivory Tusq
Different Nut Material

Shared Features
Taylor Baby Mahogany BT2e vs Builder's Edition 912ce

Saddle Material
Synthetic Bone
Same Saddle Material
Bridge Material
West African Crelicam Ebony
Same Bridge Material
Neck Wood
Mahogany
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Fretboard Radius
15'' (381mm)
Same fretboard comfortability
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • High-Quality Nut
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Taylor Baby Mahogany BT2e Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Taylor Builder's Edition 912ce is probably the better product overall with its final score of 84 compared to the Taylor Baby Mahogany BT2e's 77 score, although not by a lot.

The Taylor Builder's Edition 912ce wins when it comes to sound, build quality. On the other hand, the Taylor Baby Mahogany BT2e has the upper hand when it comes to playability, value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Taylor Baby Mahogany BT2e is the better choice.

The Taylor Baby Mahogany BT2e meets 5 out of our 8 criteria items for beginner friendliness, while the Taylor Builder's Edition 912ce meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Taylor Baby Mahogany BT2e
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Short scale
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Soft Strings
  • Locking tuners

New Player Friendliness

Taylor Builder's Edition 912ce
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Taylor Baby Mahogany BT2e Overview

  • From Taylor's 2014 Baby Taylor series
  • Made in Mexico
  • 6 strings
  • 22.75"'' scale
  • 15" Fretboard Radius
  • Solid Tropical Mahogany top
  • Layered Sapele back
  • Layered Sapele sides
  • Mahogany neck
  • West African Crelicam Ebony fretboard
  • Bridge pickup: ES-B Electronics (Preamp/Active)
  • West African Crelicam Ebony bridge
  • Acoustic Taylor Standard Set neck
  • 19 Medium frets
  • Die-Cast Chrome tuners
  • Compare Specs >

Taylor Builder's Edition 912ce Overview

  • From Taylor's 2020 900 series
  • Made in United States
  • 6 strings
  • 24.9"'' scale
  • 15" Fretboard Radius
  • Solid Lutz Spruce top
  • Solid Indian Rosewood back
  • Solid Indian Rosewood sides
  • Tropical Mahogany neck
  • West African Crelicam Ebony fretboard
  • Bridge pickup: Expression System 2 Electronics (Preamp/Active)
  • West African Crelicam Ebony bridge
  • Acoustic Taylor Standard Set neck
  • 20 Medium frets
  • Gotoh tuners
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Taylor Baby Mahogany BT2e

Sapele wood pattern used for guitar building
Sapele

It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.

Woods Used in the Taylor Builder's Edition 912ce

Spruce wood pattern used for guitar building
Spruce
Rosewood wood pattern used for guitar building
Rosewood

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Winner: Taylor Builder's Edition 912ce.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Taylor Baby Mahogany BT2e
Sustain 80
Versatility 75
Tuning Stability 70
Sound 81
Taylor Builder's Edition 912ce
Sustain 90
Versatility 85
Tuning Stability 70
Sound 86

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Taylor Baby Mahogany BT2e compares to the Taylor Builder's Edition 912ce.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Taylor Baby Mahogany BT2e is built in Mexico while the Taylor Builder's Edition 912ce is made in United States.

Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Taylor Builder's Edition 912ce

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Taylor Baby Mahogany BT2e has a NuBone nut. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.

On the other hand, the Taylor Builder's Edition 912ce comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Taylor Baby Mahogany BT2e's are Die-Cast Chrome while the Taylor Builder's Edition 912ce's are Gotoh

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Taylor Baby Mahogany BT2e
  • Expensive Wood
  • NuBone Nut
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Mexico
  • No Top Brand Pickups
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Taylor Builder's Edition 912ce
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Top Brand Pickups
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Taylor Baby Mahogany BT2e
Quality of materials 71
Features 75
Quality Control 70
Build Quality 72
Taylor Builder's Edition 912ce
Quality of materials 91
Features 75
Quality Control 100
Build Quality 89

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Taylor Baby Mahogany BT2e Nut Width
Taylor Baby Mahogany BT2e Nut Width
Taylor Builder's Edition 912ce Nut Width
Taylor Builder's Edition 912ce Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Taylor Builder's Edition 912ce has the wider nut with 44.5mm (1.75'') vs 42.9mm (1.688''). This is a 1.6mm (0.062'') difference

This means that it will be more difficult to do bar chords on the Taylor Builder's Edition 912ce, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Taylor Baby Mahogany BT2e's Scale Length
Taylor Baby Mahogany BT2e's Scale Length
Taylor Builder's Edition 912ce's Scale Length
Taylor Builder's Edition 912ce's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Taylor Builder's Edition 912ce has the longest scale: 24.9". The Taylor Baby Mahogany BT2e is only 22.75" long. This is a 2.15'' (54.6mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Taylor Baby Mahogany BT2e Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Taylor Baby Mahogany BT2e and the Taylor Builder's Edition 912ce have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Taylor Baby Mahogany BT2e Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Taylor Baby Mahogany BT2e and the Taylor Builder's Edition 912ce have the same fretboard radius of 15". This radius y closer to the 12'' that most Les Paul guitars have, but a bit flatter. It'll make it easier to play single notes than chords, but it's still comfortable for playing chords without muting strings.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Taylor Baby Mahogany BT2e:
Big Hands
Small Hands
Taylor Builder's Edition 912ce:
Big Hands
Small Hands

Fret Size

Taylor Baby Mahogany BT2e and Taylor Builder's Edition 912ce Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Taylor Baby Mahogany BT2e
Bending & Vibrato Ease 90
Chord Playability 75
Solo Playability 70
Playability 78
Taylor Builder's Edition 912ce
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 80
Playability 77

Specs Side-by-Side

Taylor Baby Mahogany BT2e vs Builder's Edition 912ce
General Taylor Baby Mahogany BT2e Builder's Edition 912ce
Brand: Taylor Taylor
Year: 2014 2020
Strings: 6 6
Made in: Mexico United States
Series: Baby Taylor 900
Colors: Natural Natural
Left-Handed Version: Yes Yes
Body
Type: Hollowbody Hollowbody
Body Material: Solid Tropical Mahogany Solid Lutz Spruce
Sides Material: Sapele Rosewood
Back Material: Sapele Rosewood
Bridge: West African Crelicam Ebony West African Crelicam Ebony
Neck
Neck Joint: Set Set
Tuners: Die-Cast Chrome Gotoh
Fretboard: West African Crelicam Ebony West African Crelicam Ebony
Neck Material: Mahogany Tropical Mahogany
Decoration: 4mm Dot Italian Acrylic Belle Fleur, Mother of Pearl
Scale Size: 22.75" 24.9"
Shape: Acoustic Taylor Standard Acoustic Taylor Standard
Frets: 19 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 15" 15"
Nut: NuBone Ivory Tusq
Nut Width: 42.9mm (1.688'') 44.5mm (1.75'')
Electronics
Bridge Pickup: ES-B Electronics (Preamp / Active) Expression System 2 Electronics (Preamp / Active)