Swap
Swap
Taylor AD22e
Taylor 322
VS
Playability
77
Sound
86
Build
84
Value
77
Score
82
FIND IT ON:
Sweetwater logo
Playability
77
Sound
84
Build
80
Value
75
Score
80
FIND IT ON:
Sweetwater logo
Add more to comparison

Taylor AD22e vs 322

Reasons to Get
Taylor AD22e over 322

Release Year
2021 vs 2014
From a more recent year
Value Score
77 vs 75
Better price/quality relationship

Reasons to Get
Taylor 322 over AD22e

Other Key Differences
Taylor AD22e vs 322

Back Material
Sapele vs Mahogany
Different Back Material
Sides Material
Sapele vs Mahogany
Different Sides Material
Bridge Material
Eucalyptus vs Ebony
Different Bridge Material
Fretboard Wood
Eucalyptus vs Ebony
Different Fretboard Wood

Shared Features
Taylor AD22e vs 322

Saddle Material
Synthetic Bone
Same Saddle Material
Body Wood
Mahogany
Same Body Wood
Neck Wood
Mahogany
Same Neck Wood
Headstock
3-3
Same Headstock
Nut Material
Ivory Tusq
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Nut Width
1.75'' (44.5mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.9'' (632.5mm)
Same string tension and fret separation
Fretboard Radius
15'' (381mm)
Same fretboard comfortability
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Taylor AD22e Prices

SET PRICE ALERT

Taylor 322 Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Taylor AD22e is probably the better product overall with its final score of 82 compared to the Taylor 322's 80 score, although not by a lot.

The Taylor AD22e wins when it comes to sound, build quality, value for the money. On the other hand, the Taylor 322 has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Taylor AD22e
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Taylor 322
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Taylor AD22e Overview

  • From Taylor's 2021 The American Dream series
  • Made in United States
  • 6 strings
  • 24.9"'' scale
  • 15" Fretboard Radius
  • Solid Tropical Mahogany top
  • Solid Sapele back
  • Solid Sapele sides
  • Tropical Mahogany neck
  • Eucalyptus fretboard
  • Bridge pickup: Expression System 2 Electronics (Preamp/Active)
  • Eucalyptus bridge
  • Acoustic Taylor Standard Set neck
  • 20 Medium frets
  • Taylor Nickel tuners
  • Compare Specs >

Taylor 322 Overview

  • From Taylor's 2014 300 series
  • Made in United States
  • 6 strings
  • 24.9"'' scale
  • 15" Fretboard Radius
  • Solid Tropical Mahogany top
  • Solid Tropical Mahogany back
  • Solid Tropical Mahogany sides
  • Tropical Mahogany neck
  • Ebony fretboard
  • Bridge pickup: (/)
  • Ebony bridge
  • Acoustic Taylor Standard Set neck
  • 20 Medium frets
  • Taylor Nickel tuners
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Taylor AD22e

Eucalyptus wood pattern used for guitar building
Eucalyptus
Sapele wood pattern used for guitar building
Sapele

Eucalyptus is not a common tonewood, but it's becoming more popular recently. There are many species around the world, each with its own characteristic, so it's hard to describe the tone it produces without knowing the exact species.

It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.

Woods Used in the Taylor 322

Ebony wood pattern used for guitar building
Ebony

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Winner: Taylor 322.

Electronics

The Taylor AD22e comes with a preamp that allows you to connect it to an amp, unlike its competitor. This allows it to have more versatility and sound quality if you want to record with it or play live.

Winner:Taylor AD22e.

Final Sound Quality Scores

Taylor AD22e
Sustain 90
Versatility 85
Tuning Stability 70
Sound 86
Taylor 322
Sustain 85
Versatility 80
Tuning Stability 70
Sound 84

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Taylor AD22e compares to the Taylor 322.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Ivory Tusq nuts. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. Both come with Taylor Nickel.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Taylor AD22e
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Top Brand Pickups
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Taylor 322
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Top Brand Pickups
  • No Electronics
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Taylor AD22e
Quality of materials 86
Features 75
Quality Control 90
Build Quality 84
Taylor 322
Quality of materials 86
Features 65
Quality Control 90
Build Quality 80

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Taylor AD22e Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 44.5mm (1.75'').

This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Scale Length

Taylor AD22e and Taylor 322's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.9".

This is the scale found in most triple-O acoustic guitars. It's still considered a long scale, but shorter than the standard 25.5" scale.

A shorter scale length guitar has a few advantages. One is that it is easier to play because the strings are under less tension. This can be helpful for beginners, or those with smaller hands.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Taylor AD22e Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Taylor AD22e and the Taylor 322 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Taylor AD22e Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Taylor AD22e and the Taylor 322 have the same fretboard radius of 15". This radius y closer to the 12'' that most Les Paul guitars have, but a bit flatter. It'll make it easier to play single notes than chords, but it's still comfortable for playing chords without muting strings.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Taylor AD22e:
Big Hands
Small Hands
Taylor 322:
Big Hands
Small Hands

Fret Size

Taylor AD22e and Taylor 322 Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Taylor AD22e
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 80
Playability 77
Taylor 322
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 80
Playability 77

Specs Side-by-Side

Taylor AD22e vs 322
General Taylor AD22e 322
Brand: Taylor Taylor
Year: 2021 2014
Strings: 6 6
Made in: United States United States
Series: The American Dream 300
Colors: Natural Natural
Left-Handed Version: Yes Yes
Body
Type: Hollowbody Hollowbody
Body Material: Solid Tropical Mahogany Solid Tropical Mahogany
Sides Material: Sapele Mahogany
Back Material: Sapele Mahogany
Bridge: Eucalyptus Ebony
Neck
Neck Joint: Set Set
Tuners: Taylor Nickel Taylor Nickel
Fretboard: Eucalyptus Ebony
Neck Material: Tropical Mahogany Tropical Mahogany
Decoration: 4mm Dot Italian Acrylic Small Diamonds
Scale Size: 24.9" 24.9"
Shape: Acoustic Taylor Standard Acoustic Taylor Standard
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 15" 15"
Nut: Ivory Tusq Ivory Tusq
Nut Width: 44.5mm (1.75'') 44.5mm (1.75'')
Electronics
Bridge Pickup: Expression System 2 Electronics (Preamp / Active)