Taylor 312ce-N vs Fender CN-140SCE
Reasons to Get
Taylor 312ce-N over Fender CN-140SCE
Reasons to Get
Fender CN-140SCE over Taylor 312ce-N
Other Key Differences
Taylor 312ce-N vs Fender CN-140SCE
Shared Features
Taylor 312ce-N vs Fender CN-140SCE
Common Strengths
- Solid Top Wood
- High-Quality Nut
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Taylor 312ce-N is probably the better product overall with its final score of 79 compared to the Fender CN-140SCE's 74 score, although not by a lot.
The Taylor 312ce-N wins when it comes to sound, build quality. On the other hand, the Fender CN-140SCE has the upper hand when it comes to value for the money.
If you got small hands, none of these instruments will make a big difference when it comes to comfortability.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Taylor 312ce-N is the better choice.
The Taylor 312ce-N meets 5 out of our 8 criteria items for beginner friendliness, while the Fender CN-140SCE meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Taylor 312ce-N- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Soft Strings
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Fender CN-140SCE- Comfortable shape
- Easy-to-use bridge
- Comfortable neck
- Soft Strings
- Comfortable fretboard
- Tall frets
- Narrow nut
- Short scale
- Locking tuners
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Taylor 312ce-N Overview
- From Taylor's 2021 300 series
- Made in United States
- 6 strings
- 25.5"'' scale
- 15" Fretboard Radius
- Solid Sitka Spruce top
- Solid Sapele back
- Solid Sapele sides
- Tropical Mahogany neck
- Ebony fretboard
- Bridge pickup: ES-N Electronics (Preamp/Active)
- Ebony bridge
- Acoustic Taylor Standard Set neck
- 17 Medium frets
- Classical Nickel tuners
- Weight around 3.95lbs (1.8kgs)
- Compare Specs >
Fender CN-140SCE Overview
- From Fender's 2017 Classic Design series
- Made in Indonesia
- 6 strings
- 25.3"'' scale
- 12" Fretboard Radius
- Solid Cedar top
- Laminated Ovangkol back
- Laminated Ovangkol sides
- Mahogany neck
- Walnut fretboard
- Bridge pickup: Fishman CD Preamp (Preamp/Passive)
- Walnut bridge
- Acoustic Fender 'Easy-to-Play' shape with rolled fretboard edges Set neck
- 18 Vintage frets
- 3-In-Line with Amber Pearloid Buttons tuners
- Compare Specs >
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Taylor 312ce-N
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.
Woods Used in the Fender CN-140SCE
It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.
This is a softwood that is commonly used for acoustic guitars. It's known for its warm tone with strong overtones. However, there are many species so the tone and look can vary a lot.
Ovangkol is a beautiful wood that's popular for acoustic guitars. Its tone sits somewhere between rosewood and mahogany, meaning it has a punchy low-end and nice mid-range. Find out more about Ovangkol.
Winner: Taylor 312ce-N.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Taylor 312ce-N compares to the Fender CN-140SCE.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Taylor 312ce-N is built in United States while the Fender CN-140SCE is made in Indonesia.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Taylor 312ce-N
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Taylor 312ce-N has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Fender CN-140SCE comes with a NuBone nut. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Taylor 312ce-N's are Classical Nickel while the Fender CN-140SCE's are 3-In-Line with Amber Pearloid Buttons
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Taylor 312ce-N
- Made in United States
- Expensive Wood
- Ivory Tusq Nut
- Electronics
- Ivory Tusq Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Top Brand Pickups
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender CN-140SCE
- Expensive Wood
- NuBone Nut
- Top Brand Pickups
- Electronics
- NuBone Saddle
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Taylor 312ce-N has the wider nut with 47.6mm (1.875'') vs 43mm (1.693''). This is a 4.6mm (0.182'') difference
This means that it will be more difficult to do bar chords on the Taylor 312ce-N, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Taylor 312ce-N has the longest scale: 25.5". The Fender CN-140SCE is only 25.3" long. This is a 0.2'' (5.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Taylor 312ce-N and the Fender CN-140SCE have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender CN-140SCE's fingerboard radius is smaller, which means it's more curved than the Taylor 312ce-N's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Taylor 312ce-N.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .
Taylor 312ce-N:
Fender CN-140SCE:
Fret Size
The Taylor 312ce-N has Medium frets, which should be taller than the Fender CN-140SCE's Vintage frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
