Swap
Swap
Taylor 210ce Plus
Taylor 210ce
VS
Playability
73
Sound
85
Build
75
Value
78
Score
78
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Playability
73
Sound
85
Build
74
Value
82
Score
77
FIND IT ON:
Musician's Friend logoAmazon logoSweetwater logo
Add more to comparison

Taylor 210ce Plus vs 210ce

Reasons to Get
Taylor 210ce Plus over 210ce

Release Year
2020 vs 2012
From a more recent year

Reasons to Get
Taylor 210ce over 210ce Plus

Value Score
82 vs 78
Better price/quality relationship

Other Key Differences
Taylor 210ce Plus vs 210ce

No Key Differences Found

Shared Features
Taylor 210ce Plus vs 210ce

Back Material
Rosewood
Same Back Material
Sides Material
Rosewood
Same Sides Material
Saddle Material
Synthetic Bone
Same Saddle Material
Bridge Material
West African Crelicam Ebony
Same Bridge Material
Body Wood
Spruce
Same Body Wood
Neck Wood
Mahogany
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
NuBone
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Nut Width
1.688'' (42.9mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Fretboard Radius
15'' (381mm)
Same fretboard comfortability
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • High-Quality Nut
  • Expensive Wood

Common Weaknesses

  • Solid Side Wood
  • Solid Back Wood
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Top Pickup Brand
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Taylor 210ce Plus is probably the better product overall with its final score of 78 compared to the Taylor 210ce's 77 score, although not by a lot.

The Taylor 210ce Plus wins when it comes to build quality. On the other hand, the Taylor 210ce has the upper hand when it comes to value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Taylor 210ce Plus
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Taylor 210ce
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Taylor 210ce Plus Overview

  • From Taylor's 2020 200 series
  • Made in Mexico
  • 6 strings
  • 25.5"'' scale
  • 15" Fretboard Radius
  • Solid Sitka Spruce top
  • Layered Rosewood back
  • Layered Rosewood sides
  • Tropical Mahogany neck
  • West African Crelicam Ebony fretboard
  • Bridge pickup: Expression System 2 Electronics (Preamp/Active)
  • West African Crelicam Ebony bridge
  • Acoustic Taylor Standard Set neck
  • 20 Medium frets
  • Taylor Nickel tuners
  • Compare Specs >

Taylor 210ce Overview

  • From Taylor's 2012 200 series
  • Made in Mexico
  • 6 strings
  • 25.5"'' scale
  • 15" Fretboard Radius
  • Solid Sitka Spruce top
  • Layered Rosewood back
  • Layered Rosewood sides
  • Tropical Mahogany neck
  • West African Crelicam Ebony fretboard
  • Bridge pickup: Expression System 2 Electronics (Preamp/Active)
  • West African Crelicam Ebony bridge
  • Acoustic Taylor Standard Set neck
  • 20 Medium frets
  • Die-Cast Chrome tuners
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany
Ebony wood pattern used for guitar building
Ebony
Spruce wood pattern used for guitar building
Spruce
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Winner: Tie.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Taylor 210ce Plus
Sustain 85
Versatility 85
Tuning Stability 70
Sound 85
Taylor 210ce
Sustain 85
Versatility 85
Tuning Stability 70
Sound 85

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Taylor 210ce Plus compares to the Taylor 210ce.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Mexico.

Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have NuBone nuts. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Taylor 210ce Plus's are Taylor Nickel while the Taylor 210ce's are Die-Cast Chrome

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Taylor 210ce Plus
  • Expensive Wood
  • NuBone Nut
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Mexico
  • No Top Brand Pickups
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Taylor 210ce
  • Expensive Wood
  • NuBone Nut
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Mexico
  • No Top Brand Pickups
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Taylor 210ce Plus
Quality of materials 76
Features 75
Quality Control 75
Build Quality 75
Taylor 210ce
Quality of materials 76
Features 75
Quality Control 70
Build Quality 74

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Taylor 210ce Plus Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42.9mm (1.688'').

This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Scale Length

Taylor 210ce Plus and Taylor 210ce's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Taylor 210ce Plus Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Taylor 210ce Plus and the Taylor 210ce have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Taylor 210ce Plus Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Taylor 210ce Plus and the Taylor 210ce have the same fretboard radius of 15". This radius y closer to the 12'' that most Les Paul guitars have, but a bit flatter. It'll make it easier to play single notes than chords, but it's still comfortable for playing chords without muting strings.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Taylor 210ce Plus:
Big Hands
Small Hands
Taylor 210ce:
Big Hands
Small Hands

Fret Size

Taylor 210ce Plus and Taylor 210ce Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Taylor 210ce Plus
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73
Taylor 210ce
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73

Specs Side-by-Side

Taylor 210ce Plus vs 210ce
General Taylor 210ce Plus 210ce
Brand: Taylor Taylor
Year: 2020 2012
Strings: 6 6
Made in: Mexico Mexico
Series: 200 200
Colors: Natural Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Sitka Spruce Solid Sitka Spruce
Sides Material: Rosewood Rosewood
Back Material: Rosewood Rosewood
Bridge: West African Crelicam Ebony West African Crelicam Ebony
Neck
Neck Joint: Set Set
Tuners: Taylor Nickel Die-Cast Chrome
Fretboard: West African Crelicam Ebony West African Crelicam Ebony
Neck Material: Tropical Mahogany Tropical Mahogany
Decoration: 4mm Dot Italian Acrylic 4mm Dot Italian Acrylic
Scale Size: 25.5" 25.5"
Shape: Acoustic Taylor Standard Acoustic Taylor Standard
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 15" 15"
Nut: NuBone NuBone
Nut Width: 42.9mm (1.688'') 42.9mm (1.688'')
Electronics
Bridge Pickup: Expression System 2 Electronics (Preamp / Active) Expression System 2 Electronics (Preamp / Active)