Swap
Swap
Strandberg Sälen Jazz NX 6 Black
Schecter Keith Merrow KM-7 Mk-III Hybrid
VS
Playability
78
Sound
82
Build
72
Value
67
Score
77
FIND IT ON:
Sweetwater logo
Playability
78
Sound
75
Build
80
Value
73
Score
78
FIND IT ON:
Amazon logoSweetwater logo
Add more to comparison

Strandberg Sälen Jazz NX 6 Black vs Schecter Keith Merrow KM-7 Mk-III Hybrid

Reasons to Get
Strandberg Sälen Jazz NX 6 Black over Schecter Keith Merrow KM-7 Mk-III Hybrid

Weight Relief
Yes vs None
Lighter Body
Release Year
2023 vs 2020
From a more recent year
Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Scale Length
25.5" to 25" vs 26.5"
Less fret buzz with less string stiffness
Pickup Mods
Series Split vs None
Connects pickups in series to imitate a humbucker
Strings
6 vs 7
Narrower neck and fewer strings to change
Switch Positions
5 vs 3
More tone options
Tone Knobs
1 vs 0
More tone control
Neck Thickness at 1st Fret
1.2'' (30.5mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
1.1'' (27.9mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Nut Width
1.417'' (36mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Reasons to Get
Schecter Keith Merrow KM-7 Mk-III Hybrid over Strandberg Sälen Jazz NX 6 Black

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Scale Length
26.5" vs 25.5" to 25"
Easier to adapt to
Compound Radius
12" to 16" vs 20"
Balanced playability for chords and single-notes
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Strings
7 vs 6
Allows you to play lower notes
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.748'' (19mm) vs 1.2'' (30.5mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 1.1'' (27.9mm)
More comfortable at higher frets for small hands
Nut Width
1.89'' (48mm) vs 1.417'' (36mm)
Less likely to mute strings by accident and more space for fingerstyle
Pickups Power
Active vs Passive
More output
Value Score
73 vs 67
Better price/quality relationship

Other Key Differences
Strandberg Sälen Jazz NX 6 Black vs Schecter Keith Merrow KM-7 Mk-III Hybrid

Bridge Pickup
Strandberg Classic Bridge vs Fishman Fluence Keith Merrow Humbucker
Different Bridge Pickup
Neck Pickup
Strandberg Classic Neck vs Fishman Fluence Keith Merrow Humbucker
Different Neck Pickup
Neck Wood
Mahogany vs Maple
Different Neck Wood
Fretboard Wood
Rosewood vs Maple
Different Fretboard Wood
Headstock
Headless vs 4-3
Different Headstock
Nut Material
Locking vs Compensated
Different Nut Material

Shared Features
Strandberg Sälen Jazz NX 6 Black vs Schecter Keith Merrow KM-7 Mk-III Hybrid

Body Wood
Mahogany
Same Body Wood
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people

Common Strengths

  • High-Quality Nut
  • High-Quality Frets
  • Luminescent Sidedots
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Stays in Tune (Evertune)
  • From a High-Quality-Standards Country
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Strandberg Sälen Jazz NX 6 Black Prices

SET PRICE ALERT

Schecter Keith Merrow KM-7 Mk-III Hybrid Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter Keith Merrow KM-7 Mk-III Hybrid is probably the better product overall with its final score of 78 compared to the Strandberg Sälen Jazz NX 6 Black's 77 score, although not by a lot.

The Schecter Keith Merrow KM-7 Mk-III Hybrid wins when it comes to build quality, value for the money. On the other hand, the Strandberg Sälen Jazz NX 6 Black has the upper hand when it comes to sound.

If you got small hands, you'll probably feel that the Strandberg Sälen Jazz NX 6 Black is easier to play.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter Keith Merrow KM-7 Mk-III Hybrid is the better choice.

The Schecter Keith Merrow KM-7 Mk-III Hybrid meets 6 out of our 8 criteria items for beginner friendliness, while the Strandberg Sälen Jazz NX 6 Black meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Strandberg Sälen Jazz NX 6 Black
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Schecter Keith Merrow KM-7 Mk-III Hybrid
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Narrow nut
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Strandberg Sälen Jazz NX 6 Black Overview

  • From Strandberg's 2023 Sälen series
  • Made in Indonesia
  • 6 strings
  • 25.5" to 25"'' scale
  • 20" Fretboard Radius
  • Chambered Mahogany body
  • Mahogany neck
  • Rosewood fretboard
  • Bridge pickup: Strandberg Classic Bridge (Humbucker/Passive)
  • Neck pickup: Strandberg Classic Neck (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 5-way Switch
  • Strandberg EGS Series 7 fixed & string locks bridge
  • EndurNeck Bolt-On neck
  • 24 Medium Jumbo Stainless Steel frets
  • At bridge tuners
  • Compare Specs >

Schecter Keith Merrow KM-7 Mk-III Hybrid Overview

  • From Schecter's 2020 Artist series
  • Keith Merrow Signature
  • Made in South Korea
  • 7 strings
  • 26.5"'' scale
  • 12" to 16" Fretboard Radius
  • Mahogany body
  • Maple 3-pc w/ Carbon Fiber Reinforcement Rods neck
  • Maple fretboard
  • Bridge pickup: Fishman Fluence Keith Merrow Humbucker (Humbucker/Active)
  • Neck pickup: Fishman Fluence Keith Merrow Humbucker (Humbucker/Active)
  • 1 volume and 0 tone Dome knobs
  • 3-way Switch
  • Hipshot Hardtail w/ String Thru Body bridge
  • Ultra Thin C Neck-Through neck
  • 24 XL Jumbo Stainless Steel frets
  • Schecter Locking tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Strandberg Sälen Jazz NX 6 Black

Rosewood wood pattern used for guitar building
Rosewood

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Schecter Keith Merrow KM-7 Mk-III Hybrid

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Winner: Strandberg Sälen Jazz NX 6 Black.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

The Strandberg Sälen Jazz NX 6 Black's pickups are Passive while the Schecter Keith Merrow KM-7 Mk-III Hybrid's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Strandberg Sälen Jazz NX 6 Black gives you 5 switch options while the Schecter Keith Merrow KM-7 Mk-III Hybrid gives you 3. This means that the Strandberg Sälen Jazz NX 6 Black gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the Strandberg Sälen Jazz NX 6 Black comes with some kind of pickup modification: Series Split.

The Series Split feature allows it to split and connect some of the pickups in series. When wired in series, the resulting tone is similar to a Humbucker's. The pickups will work together and produce a fuller tone with more output than single-coils, but less than Humbuckers.

The Strandberg Sälen Jazz NX 6 Black doesn't come with pickup switching options.

Schecter Keith Merrow KM-7 Mk-III Hybrid pickups switch and push knobs diagram
Schecter Keith Merrow KM-7 Mk-III Hybrid's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Strandberg Sälen Jazz NX 6 Black.

Final Sound Quality Scores

Strandberg Sälen Jazz NX 6 Black
Pickups 85
Sustain 75
Versatility 83
Tuning Stability 85
Sound 82
Schecter Keith Merrow KM-7 Mk-III Hybrid
Pickups 85
Sustain 85
Versatility 48
Tuning Stability 80
Sound 75

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Strandberg Sälen Jazz NX 6 Black compares to the Schecter Keith Merrow KM-7 Mk-III Hybrid.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Strandberg Sälen Jazz NX 6 Black is built in Indonesia while the Schecter Keith Merrow KM-7 Mk-III Hybrid is made in South Korea.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Strandberg Sälen Jazz NX 6 Black has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the Schecter Keith Merrow KM-7 Mk-III Hybrid comes with a Compensated nut. Each hole where the string sits at the nut is cut at a different distance from the bridge, which compensates for the different amount of tension that each string is subject to. This fixes most intonation issues across the fretboard, so it gives great tuning stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Schecter Keith Merrow KM-7 Mk-III Hybrid has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the Strandberg Sälen Jazz NX 6 Black has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: Schecter Keith Merrow KM-7 Mk-III Hybrid.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Strandberg Sälen Jazz NX 6 Black has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Schecter Keith Merrow KM-7 Mk-III Hybrid comes with Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

Winner: Schecter Keith Merrow KM-7 Mk-III Hybrid.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Strandberg Sälen Jazz NX 6 Black
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Series Split Pickups
  • Weight Relief
  • Luminescent Inlay
  • Made in Indonesia
  • No Neck-Through Build
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Keith Merrow KM-7 Mk-III Hybrid
  • Stainless Steel Frets
  • Locking Tuners
  • Expensive Wood
  • Compensated Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Luminescent Inlay
  • Compound Radius Fretboard
  • Made in South Korea
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Strandberg Sälen Jazz NX 6 Black
Quality of materials 61
Features 70
Quality Control 85
Build Quality 72
Schecter Keith Merrow KM-7 Mk-III Hybrid
Quality of materials 76
Features 85
Quality Control 80
Build Quality 80

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Strandberg Sälen Jazz NX 6 Black Nut Width
Strandberg Sälen Jazz NX 6 Black Nut Width
Schecter Keith Merrow KM-7 Mk-III Hybrid Nut Width
Schecter Keith Merrow KM-7 Mk-III Hybrid Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Schecter Keith Merrow KM-7 Mk-III Hybrid has the wider nut with 48mm (1.89'') vs 36mm (1.417''). This is a 12mm (0.473'') difference

This means that it will be more difficult to do bar chords on the Schecter Keith Merrow KM-7 Mk-III Hybrid, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Strandberg Sälen Jazz NX 6 Black's Scale Length
Strandberg Sälen Jazz NX 6 Black's Scale Length
Schecter Keith Merrow KM-7 Mk-III Hybrid's Scale Length
Schecter Keith Merrow KM-7 Mk-III Hybrid's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, the Strandberg Sälen Jazz NX 6 Black features a multi-scale of 25.5" to 25" while the Schecter Keith Merrow KM-7 Mk-III Hybrid has a regular scale of 26.5".

A multi-scale fingerboard incorporates two scale lengths at the same time. This is present in some instruments with long scale to give a different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.

It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.

On the other hand, the Schecter Keith Merrow KM-7 Mk-III Hybrid's 26.5" regular scale means it has a fixed scale for all the strings.This scale is close to the popular 25.50" length, but adding an additional inch allows you to tune your strings lower while keeping the action low without causing fret buzz. This is useful for lower tunings, 7-string, or even classical guitars.

You want to avoid such a long scale if you don't plan to play in low tunings since the longer scale also means the frets are more separated, making it harder to play fast, especially for small hands.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Strandberg Sälen Jazz NX 6 Black Neck Profile
Strandberg Sälen Jazz NX 6 Black's neck profile
Schecter Keith Merrow KM-7 Mk-III Hybrid Neck Profile
Schecter Keith Merrow KM-7 Mk-III Hybrid's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Strandberg Sälen Jazz NX 6 Black and the Schecter Keith Merrow KM-7 Mk-III Hybrid have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Strandberg Sälen Jazz NX 6 Black Fingerboard Radius
Strandberg Sälen Jazz NX 6 Black's Fingerboard radius
Schecter Keith Merrow KM-7 Mk-III Hybrid Fretboard Compound Radius
Schecter Keith Merrow KM-7 Mk-III Hybrid's Compound Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter Keith Merrow KM-7 Mk-III Hybrid is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter Keith Merrow KM-7 Mk-III Hybrid favors large hands more than the Strandberg Sälen Jazz NX 6 Black.

Strandberg Sälen Jazz NX 6 Black:
Big Hands
Small Hands
Schecter Keith Merrow KM-7 Mk-III Hybrid:
Big Hands
Small Hands

Fret Size

Strandberg Sälen Jazz NX 6 Black Frets Size
Strandberg Sälen Jazz NX 6 Black's Frets Size
Schecter Keith Merrow KM-7 Mk-III Hybrid Frets Size
Schecter Keith Merrow KM-7 Mk-III Hybrid's Frets Size

The Schecter Keith Merrow KM-7 Mk-III Hybrid has XL Jumbo frets, which should be taller than the Strandberg Sälen Jazz NX 6 Black's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Strandberg Sälen Jazz NX 6 Black
Bending & Vibrato Ease 80
Chord Playability 75
Solo Playability 80
Playability 78
Schecter Keith Merrow KM-7 Mk-III Hybrid
Bending & Vibrato Ease 75
Chord Playability 60
Solo Playability 100
Playability 78

Specs Side-by-Side

Strandberg Sälen Jazz NX 6 Black vs Schecter Keith Merrow KM-7 Mk-III Hybrid
General Strandberg Sälen Jazz NX 6 Black Schecter Keith Merrow KM-7 Mk-III Hybrid
Brand: Strandberg Schecter
Year: 2023 2020
Configuration: HH HH
Strings: 6 7
Made in: Indonesia South Korea
Series: Sälen Artist
Colors: Black, Red, Natural White, Gray
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Chambered Mahogany Mahogany
Bridge: Strandberg EGS Series 7 fixed & string locks Hipshot Hardtail w/ String Thru Body
Neck
Neck Joint: Bolt-On Neck-Through
Tuners: At bridge Schecter Locking
Fretboard: Rosewood Maple
Neck Material: Mahogany Maple 3-pc w/ Carbon Fiber Reinforcement Rods
Decoration: Illuminlay dots Offset/Reverse Aluminum Circles & Black Dots
Scale Size: 25.5" to 25" 26.5"
Shape: EndurNeck Ultra Thin C
Thickness: 1st Fret: 1.2'' (30.5mm) - 12th Fret: 1.1'' (27.9mm) 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 24 Medium Jumbo Stainless Steel 24 XL Jumbo Stainless Steel
Fretboard Radius: 20" 12" to 16"
Nut: Locking Compensated
Nut Width: 36mm (1.417'') 48mm (1.89'')
Electronics
Bridge Pickup: Strandberg Classic Bridge (Humbucker / Passive) Fishman Fluence Keith Merrow Humbucker (Humbucker / Active)
Middle Pickup:
Neck Pickup: Strandberg Classic Neck (Humbucker / Passive) Fishman Fluence Keith Merrow Humbucker (Humbucker / Active)
Switch: 5 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Series Split None
Volume Controls: 1 1
Tone Controls: 1 0