Show Full Spec Comparison
| Strandberg Boden Prog NX 6 Charcoal Black | Boden Prog NX 6 Plini Edition | |
|---|---|---|
| General | ||
| Brand: | Strandberg | Strandberg |
| Year: | 2021 | 2021 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | Indonesia | Indonesia |
| Series: | Boden Prog | Boden Prog |
| Colors: | Green, Red, Natural, Grey | Natural |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Chambered Swamp Ash | Chambered Mahogany |
| Bridge: | Strandberg EGS Pro Rev7 tremolo system & string locks | Strandberg EGS Rev 7 tremolo system & string locks |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | At bridge | At bridge |
| Fretboard: | Richlite | Richlite |
| Neck Material: | Maple neck – Quartersawn, Carbon Fiber reinforced | Mahogany |
| Decoration: | Offset Illuminlay Dots | Illuminlay Moon at 12th fret |
| Scale Size: | 25.5" to 25" | 25.5" to 25" |
| Shape: | EndurNeck | EndurNeck |
| Thickness: | 1st Fret: 1.2'' (30.5mm) - 12th Fret: 1.1'' (27.9mm) | 1st Fret: 1.2'' (30.5mm) - 12th Fret: 1.1'' (27.9mm) |
| Frets: | 24 Medium Jumbo Stainless Steel | 24 Medium Jumbo Stainless Steel |
| Fretboard Radius: | 20" | 20" |
| Nut: | Locking | Locking |
| Nut Width: | 36mm (1.417'') | 36mm (1.417'') |
| Electronics | ||
| Bridge Pickups: | Suhr SSH+ Bridge (Humbucker / Passive) | Strandberg Plini Edition Bridge (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Suhr SSV Neck (Humbucker / Passive) | Strandberg Plini Edition Neck (Humbucker / Passive) |
| Switch: | 5 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | Coil Split |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 0 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Black |
Show Diagrams Comparison
Reasons to Get
Strandberg Boden Prog NX 6 Charcoal Black over Boden Prog NX 6 Plini Edition
Reasons to Get
Strandberg Boden Prog NX 6 Plini Edition over Boden Prog NX 6 Charcoal Black
Other Key Differences
Strandberg Boden Prog NX 6 Charcoal Black vs Boden Prog NX 6 Plini Edition
Shared Features
Strandberg Boden Prog NX 6 Charcoal Black vs Boden Prog NX 6 Plini Edition
Common Strengths
- Weight Relief
- High-Quality Nut
- High-Quality Frets
- Luminescent Sidedots
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Retainer Bar
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Strandberg Boden Prog NX 6 Charcoal Black:
Strandberg Boden Prog NX 6 Plini Edition:
Beginner Friendliness
Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Strandberg Boden Prog NX 6 Charcoal Black- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
Strandberg Boden Prog NX 6 Plini Edition- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
It's very similar to Ebony, but it is much cheaper to make. The main reason is that it is made from resin-infused paper. It is very durable and soft, so it's often used for fretboards and tops.
Woods Used in the Strandberg Boden Prog NX 6 Charcoal Black
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Woods Used in the Strandberg Boden Prog NX 6 Plini Edition
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Strandberg Boden Prog NX 6 Charcoal Black gives you 5 switch options while the Strandberg Boden Prog NX 6 Plini Edition gives you 3. This means that the Strandberg Boden Prog NX 6 Charcoal Black gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the Strandberg Boden Prog NX 6 Plini Edition comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Strandberg Boden Prog NX 6 Plini Edition.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Strandberg Boden Prog NX 6 Charcoal Black compares to the Strandberg Boden Prog NX 6 Plini Edition.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Locking nuts. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Unfortunately, neither of them have a retainer bar for the nut, which would be a helpful addition. Without it, the strings will change pitch once you lock down the nut, so you'll have to make more micro-adjustments at the bridge to tune it correctly.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
In this case, both lack regular machine heads because they're headless guitars. Instead, the strings are tuned at the bridge. This gives the guitars better balance and will prevent neck dives. It also makes them more travel friendly.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Strandberg Boden Prog NX 6 Charcoal Black
- Stainless Steel Frets
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Weight Relief
- Luminescent Inlay
- Tremolo
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Strandberg Boden Prog NX 6 Plini Edition
- Stainless Steel Frets
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Weight Relief
- Luminescent Inlay
- Tremolo
- Made in Indonesia
- No Neck-Through Build
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 36mm (1.417'').
This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5" to 25".
These are multi-scale fingerboards, which means that they incorporate two scale lengths at the same time. This is present in some instruments with long scale to give a different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.
It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Strandberg Boden Prog NX 6 Charcoal Black and the Strandberg Boden Prog NX 6 Plini Edition have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Strandberg Boden Prog NX 6 Charcoal Black and the Strandberg Boden Prog NX 6 Plini Edition have the same fretboard radius of 20". This fretboard is almost completely flat, which makes it perfect for playing single notes and bending comfortably. However, chords are harder to perform due to the lack of space for your fingers.
Fret Size
Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.
