Show Full Spec Comparison
| Strandberg Boden Fusion NX 6 Amber Yellow | Sterling Cutlass CT50HSS | |
|---|---|---|
| General | ||
| Brand: | Strandberg | Sterling |
| Year: | 2021 | 2021 |
| Configuration: | HSH | HSS |
| Strings: | 6 | 6 |
| Made in: | Indonesia | Indonesia |
| Series: | Boden Fusion | Cutlass |
| Colors: | Red, Yellow | Gold, White, Brown, Gray, Blue Satin, Pink Satin |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Chambered Alder | Poplar |
| Bridge: | Strandberg EGS Pro Rev7 tremolo system & string locks | Vintage Tremolo |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | At bridge | Locking |
| Fretboard: | Indian Rosewood | Rosewood |
| Neck Material: | Maple | Roasted Maple |
| Decoration: | Green Side Dots | Dot Markers |
| Scale Size: | 25.5" to 25" | 25.5" |
| Shape: | EndurNeck | Cutlass |
| Thickness: | 1st Fret: 1.2'' (30.5mm) - 12th Fret: 1.1'' (27.9mm) | 1st Fret: 0.827'' (21mm) - 12th Fret: 0.965'' (24.5mm) |
| Frets: | 24 Medium Jumbo Stainless Steel | 22 Medium Nickel Silver |
| Fretboard Radius: | 20" | 12" |
| Nut: | Locking | Compensated |
| Nut Width: | 36mm (1.417'') | 41.9mm (1.65'') |
| Electronics | ||
| Bridge Pickups: | Suhr SSV+ Bridge (Humbucker / Passive) | Sterling Humbucker (Humbucker / Passive) |
| Middle Pickup: | Suhr V60LP single-coil (Single Coil / Passive) | Sterling Single Coil (Single Coil / Passive) |
| Neck Pickup: | Suhr SSV Neck (Humbucker / Passive) | Sterling Single Coil (Single Coil / Passive) |
| Switch: | 5 Way | 5 Way |
| Knobs: | Dome | Bell |
| Pickup Mods: | Coil Split | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Chrome |
Show Diagrams Comparison
Reasons to Get
Strandberg Boden Fusion NX 6 Amber Yellow over Sterling Cutlass CT50HSS
Reasons to Get
Sterling Cutlass CT50HSS over Strandberg Boden Fusion NX 6 Amber Yellow
Other Key Differences
Strandberg Boden Fusion NX 6 Amber Yellow vs Sterling Cutlass CT50HSS
Shared Features
Strandberg Boden Fusion NX 6 Amber Yellow vs Sterling Cutlass CT50HSS
Common Strengths
- High-Quality Nut
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Strandberg Boden Fusion NX 6 Amber Yellow:
Sterling Cutlass CT50HSS:
Beginner Friendliness
The Sterling Cutlass CT50HSS meets 6 out of our 8 criteria items for beginner friendliness, while the Strandberg Boden Fusion NX 6 Amber Yellow meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Strandberg Boden Fusion NX 6 Amber Yellow- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
Sterling Cutlass CT50HSS- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Strandberg Boden Fusion NX 6 Amber Yellow
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Sterling Cutlass CT50HSS
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Poplar is a cheaper and heavier alternative to Alder wood. It terms of tone, it emphasizes the low-end and has cutting mids. It's relatively soft compared to most body woods. Find out more about Poplar.
Winner: Tie.
Pickup Configuration
The Strandberg Boden Fusion NX 6 Amber Yellow has an HSH configuration while the Sterling Cutlass CT50HSS has HSS pickups.
HSH is a versatile pickup configuration that will give you the high output, full tone, and quiet sound of humbucker pickups, but with the possibility of using a single coil for cleaner tones. The disadvantage is that the middle single-coil pickup will have a noticeable lower volume, so you might want to adjust the height of the pickups. Another problem is that if you set the middle pickup too high, it might interfere with your picking hand.
On the other hand, HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.
Pickups Quality
The Strandberg Boden Fusion NX 6 Amber Yellow has pickups from a more specialized brand than the Sterling Cutlass CT50HSS. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Strandberg Boden Fusion NX 6 Amber Yellow.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Strandberg Boden Fusion NX 6 Amber Yellow comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Strandberg Boden Fusion NX 6 Amber Yellow.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Strandberg Boden Fusion NX 6 Amber Yellow compares to the Sterling Cutlass CT50HSS.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Strandberg Boden Fusion NX 6 Amber Yellow has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
On the other hand, the Sterling Cutlass CT50HSS comes with a Compensated nut. Each hole where the string sits at the nut is cut at a different distance from the bridge, which compensates for the different amount of tension that each string is subject to. This fixes most intonation issues across the fretboard, so it gives great tuning stability.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Strandberg Boden Fusion NX 6 Amber Yellow is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Strandberg Boden Fusion NX 6 Amber Yellow.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Sterling Cutlass CT50HSS has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Nevertheless, the Strandberg Boden Fusion NX 6 Amber Yellow has a locking nut, so it should have even better tune stability and doesn't need locking tuners.
Winner: Sterling Cutlass CT50HSS.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Strandberg Boden Fusion NX 6 Amber Yellow
- Stainless Steel Frets
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Coil Split Pickups
- Weight Relief
- Luminescent Inlay
- Tremolo
- Made in Indonesia
- No Neck-Through Build
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Sterling Cutlass CT50HSS
- Locking Tuners
- Expensive Wood
- Compensated Nut
- Tremolo
- Cheap Fret Wire (NS)
- Made in Indonesia
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Sterling Cutlass CT50HSS has the wider nut with 41.9mm (1.65'') vs 36mm (1.417''). This is a 5.9mm (0.233'') difference
This means that it will be more difficult to do bar chords on the Sterling Cutlass CT50HSS, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, the Strandberg Boden Fusion NX 6 Amber Yellow features a multi-scale of 25.5" to 25" while the Sterling Cutlass CT50HSS has a regular scale of 25.5".
A multi-scale fingerboard incorporates two scale lengths at the same time. This is present in some instruments with long scale to give a different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.
It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.
On the other hand, the Sterling Cutlass CT50HSS's 25.5" regular scale means it has a fixed scale for all the strings.This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Strandberg Boden Fusion NX 6 Amber Yellow and the Sterling Cutlass CT50HSS have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Sterling Cutlass CT50HSS's fingerboard radius is smaller, which means it's more curved than the Strandberg Boden Fusion NX 6 Amber Yellow's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Strandberg Boden Fusion NX 6 Amber Yellow.
Fret Size
The Strandberg Boden Fusion NX 6 Amber Yellow has Medium Jumbo frets, which should be taller than the Sterling Cutlass CT50HSS's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
