Swap
Swap
Strandberg Boden Fusion NX 6 Alex Machacek Edition
Harley Benton R-458FFB Roasted FanFret
VS
Playability
77
Sound
81
Build
73
Value
67
Score
77
FIND IT ON:
Reverb logo
Playability
75
Sound
65
Build
54
Value
75
Score
65
FIND IT ON:
Thomann logoReverb logo
Add to Compare
Add to Compare
Side to side spec comparison >

Strandberg Boden Fusion NX 6 Alex Machacek Edition vs Harley Benton R-458FFB Roasted FanFret

Reasons to Get
Strandberg Boden Fusion NX 6 Alex Machacek Edition over Harley Benton R-458FFB Roasted FanFret

Weight Relief
Yes vs None
Lighter Body
Country of Manufacturing
Indonesia vs China
Built with higher quality standards
Decorative Top
Flame Maple vs None
Finished with beautiful natural wood patterns
Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Neck Profile
EndurNeck vs Harley Benton Speed D
Comfortable neck that works for most people
Pickups Brand
Strandberg vs None
Pickups from a renown brand
Strings
6 vs 8
Narrower neck and fewer strings to change
Switch Positions
5 vs 3
More tone options
Pickups
HSH vs HH
High output, round sound with a single-coil for cleans
Nut Width
1.417'' (36mm) vs 2.126'' (54mm)
Favors small hands, easier bar chords and other shapes
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Fretboard Radius
20'' (508mm) vs 13.78'' (350mm)
Flatter fretboard makes it easier to play single notes and bend

Reasons to Get
Harley Benton R-458FFB Roasted FanFret over Strandberg Boden Fusion NX 6 Alex Machacek Edition

Release Year
2023 vs 2021
From a more recent year
Neck Profile
Harley Benton Speed D vs EndurNeck
Thin and flat neck for playing fast
Strings
8 vs 6
Allows you to play lower notes
Pickups
HH vs HSH
High output without hum
Nut Width
2.126'' (54mm) vs 1.417'' (36mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Fretboard Radius
13.78'' (350mm) vs 20'' (508mm)
Easier to play chords without muting strings
Value Score
75 vs 67
Better price/quality relationship

Other Key Differences
Strandberg Boden Fusion NX 6 Alex Machacek Edition vs Harley Benton R-458FFB Roasted FanFret

Bridge Pickup
Strandberg Alex Machacek Edition Bridge vs Hi-Gain Humbucker
Different Bridge Pickup
Neck Pickup
Strandberg Alex Machacek Edition Neck vs Hi-Gain Humbucker
Different Neck Pickup
Body Wood
Alder vs Basswood
Different Body Wood
Neck Wood
Maple vs Roasted Maple
Different Neck Wood
Fretboard Wood
Rosewood vs Roasted Maple
Different Fretboard Wood
Headstock
Headless vs 4-4
Different Headstock
Nut Material
Locking vs NuBone
Different Nut Material

Shared Features
Strandberg Boden Fusion NX 6 Alex Machacek Edition vs Harley Benton R-458FFB Roasted FanFret

Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Strandberg Boden Fusion NX 6 Alex Machacek Edition Prices

SET PRICE ALERT

Harley Benton R-458FFB Roasted FanFret Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better for Beginners?

The Strandberg Boden Fusion NX 6 Alex Machacek Edition meets 5 out of our 8 criteria items for beginner friendliness, while the Harley Benton R-458FFB Roasted FanFret meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Strandberg Boden Fusion NX 6 Alex Machacek Edition
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

New Player Friendliness

Harley Benton R-458FFB Roasted FanFret
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Strandberg Boden Fusion NX 6 Alex Machacek Edition

Maple wood pattern used for guitar building
Maple
Rosewood wood pattern used for guitar building
Rosewood
Alder wood pattern used for guitar building
Alder

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Harley Benton R-458FFB Roasted FanFret

Roasted Maple wood pattern used for guitar building
Roasted Maple
Basswood wood pattern used for guitar building
Basswood

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: Strandberg Boden Fusion NX 6 Alex Machacek Edition.

Pickup Configuration

The Strandberg Boden Fusion NX 6 Alex Machacek Edition has an HSH configuration while the Harley Benton R-458FFB Roasted FanFret has HH pickups.

HSH is a versatile pickup configuration that will give you the high output, full tone, and quiet sound of humbucker pickups, but with the possibility of using a single coil for cleaner tones. The disadvantage is that the middle single-coil pickup will have a noticeable lower volume, so you might want to adjust the height of the pickups. Another problem is that if you set the middle pickup too high, it might interfere with your picking hand.

On the other hand, Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Strandberg Boden Fusion NX 6 Alex Machacek Edition has pickups from a more specialized brand than the Harley Benton R-458FFB Roasted FanFret. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Strandberg Boden Fusion NX 6 Alex Machacek Edition.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Strandberg Boden Fusion NX 6 Alex Machacek Edition gives you 5 switch options while the Harley Benton R-458FFB Roasted FanFret gives you 3. This means that the Strandberg Boden Fusion NX 6 Alex Machacek Edition gives you more options to find the right pickup combination for the type of sound you want to achieve

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

Strandberg Boden Fusion NX 6 Alex Machacek Edition pickups switch selector and push knobs diagram
Strandberg Boden Fusion NX 6 Alex Machacek Edition's switch options
Harley Benton R-458FFB Roasted FanFret pickups switch and push knobs diagram
Harley Benton R-458FFB Roasted FanFret's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Strandberg Boden Fusion NX 6 Alex Machacek Edition.

Final Sound Quality Scores

Strandberg Boden Fusion NX 6 Alex Machacek Edition
Pickups 85
Sustain 70
Versatility 85
Tuning Stability 85
Sound 81
Harley Benton R-458FFB Roasted FanFret
Pickups 55
Sustain 75
Versatility 59
Tuning Stability 70
Sound 65

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Strandberg Boden Fusion NX 6 Alex Machacek Edition compares to the Harley Benton R-458FFB Roasted FanFret.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Strandberg Boden Fusion NX 6 Alex Machacek Edition is built in Indonesia while the Harley Benton R-458FFB Roasted FanFret is made in China.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Strandberg Boden Fusion NX 6 Alex Machacek Edition

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Strandberg Boden Fusion NX 6 Alex Machacek Edition has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the Harley Benton R-458FFB Roasted FanFret comes with a NuBone nut. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Strandberg Boden Fusion NX 6 Alex Machacek Edition is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Strandberg Boden Fusion NX 6 Alex Machacek Edition.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Strandberg Boden Fusion NX 6 Alex Machacek Edition's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

On the other hand, the Harley Benton R-458FFB Roasted FanFret's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

In this case, the Strandberg Boden Fusion NX 6 Alex Machacek Edition has no machine heads because it is a headless guitar. Instead, the strings are tuned at the bridge. This gives the guitar a better balance and will prevent neck dives. It also makes it more travel friendly.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Strandberg Boden Fusion NX 6 Alex Machacek Edition
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Weight Relief
  • Luminescent Inlay
  • Tremolo
  • Made in Indonesia
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Harley Benton R-458FFB Roasted FanFret
  • NuBone Nut
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No Expensive Woods
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Strandberg Boden Fusion NX 6 Alex Machacek Edition
Quality of materials 65
Features 70
Quality Control 85
Build Quality 73
Harley Benton R-458FFB Roasted FanFret
Quality of materials 51
Features 55
Quality Control 55
Build Quality 54

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Strandberg Boden Fusion NX 6 Alex Machacek Edition Nut Width
Strandberg Boden Fusion NX 6 Alex Machacek Edition Nut Width
Harley Benton R-458FFB Roasted FanFret Nut Width
Harley Benton R-458FFB Roasted FanFret Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Harley Benton R-458FFB Roasted FanFret has the wider nut with 54mm (2.126'') vs 36mm (1.417''). This is a 18mm (0.709'') difference

This means that it will be more difficult to do bar chords on the Harley Benton R-458FFB Roasted FanFret, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Strandberg Boden Fusion NX 6 Alex Machacek Edition's Scale Length
Strandberg Boden Fusion NX 6 Alex Machacek Edition's Scale Length
Harley Benton R-458FFB Roasted FanFret's Scale Length
Harley Benton R-458FFB Roasted FanFret's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a multi-scale. The Strandberg Boden Fusion NX 6 Alex Machacek Edition has a 25.5" to 25" scale, and the Harley Benton R-458FFB Roasted FanFret features a 27" to 25.5" size.

They incorporate two scale lengths at the same time. This is present in some instruments with long scale to give different tension to the lower strings than the higher strings. The thickest strings need more tension to avoid fret buzz (especially when tuned low), so the scale is longer for these strings, while the thinnest strings will need less tension (because they have a lower gauge), so they have a shorter scale to reduce stiffness for bends.

It can feel awkward if you've never played a multi-scale because the frets will have more separation for the higher strings, but a lot of people love their versatility.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Strandberg Boden Fusion NX 6 Alex Machacek Edition Neck Profile
Strandberg Boden Fusion NX 6 Alex Machacek Edition's neck profile
Harley Benton R-458FFB Roasted FanFret Neck Profile
Harley Benton R-458FFB Roasted FanFret's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Strandberg Boden Fusion NX 6 Alex Machacek Edition has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The Harley Benton R-458FFB Roasted FanFret, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

Fretboard Radius

Strandberg Boden Fusion NX 6 Alex Machacek Edition Fingerboard Radius
Strandberg Boden Fusion NX 6 Alex Machacek Edition's Fingerboard radius
Harley Benton R-458FFB Roasted FanFret Fingerboard Radius
Harley Benton R-458FFB Roasted FanFret's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Harley Benton R-458FFB Roasted FanFret's fingerboard radius is smaller, which means it's more curved than the Strandberg Boden Fusion NX 6 Alex Machacek Edition's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Strandberg Boden Fusion NX 6 Alex Machacek Edition.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Harley Benton R-458FFB Roasted FanFret favors large hands more than the Strandberg Boden Fusion NX 6 Alex Machacek Edition.

Strandberg Boden Fusion NX 6 Alex Machacek Edition:
Big Hands
Small Hands
Harley Benton R-458FFB Roasted FanFret:
Big Hands
Small Hands

Fret Size

Strandberg Boden Fusion NX 6 Alex Machacek Edition and Harley Benton R-458FFB Roasted FanFret Frets Size
Both have a similar Medium Jumbo fret size

Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.

Final Playability Scores

Strandberg Boden Fusion NX 6 Alex Machacek Edition
Bending & Vibrato Ease 75
Chord Playability 75
Solo Playability 80
Playability 77
Harley Benton R-458FFB Roasted FanFret
Bending & Vibrato Ease 80
Chord Playability 65
Solo Playability 80
Playability 75

Specs Side-by-Side

Strandberg Boden Fusion NX 6 Alex Machacek Edition vs Harley Benton R-458FFB Roasted FanFret
General Strandberg Boden Fusion NX 6 Alex Machacek Edition Harley Benton R-458FFB Roasted FanFret
Brand: Strandberg Harley Benton
Year: 2021 2023
Configuration: HSH HH
Strings: 6 8
Made in: Indonesia China
Series: Boden Fusion Progressive
Colors: Red Green
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Chambered Alder Basswood
Bridge: Strandberg EGS Pro Rev7 tremolo system & string locks Fixed
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: At bridge deluxe die-cast
Fretboard: Indian Rosewood Roasted Maple
Neck Material: Maple neck – Quartersawn, Carbon Fiber reinforced Roasted Maple
Decoration: Offset Luminlay Dots offset dot
Scale Size: 25.5" to 25" 27" to 25.5"
Shape: EndurNeck Harley Benton Speed D
Thickness: 1st Fret: 1.2'' (30.5mm) - 12th Fret: 1.1'' (27.9mm) 1st Fret: - 12th Fret:
Frets: 24 Medium Jumbo Stainless Steel 24 Medium Jumbo Nickel Silver
Fretboard Radius: 20" 13.78"
Nut: Locking NuBone
Nut Width: 36mm (1.417'') 54mm (2.126'')
Electronics
Bridge Pickup: Strandberg Alex Machacek Edition Bridge (Humbucker / Passive) Hi-Gain Humbucker (Humbucker / Passive)
Middle Pickup: Strandberg middle single-coil (Single Coil / Passive)
Neck Pickup: Strandberg Alex Machacek Edition Neck (Humbucker / Passive) Hi-Gain Humbucker (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None None
Volume Controls: 1 1
Tone Controls: 1 1