Show Full Spec Comparison
| Sterling JV60CB | Fender Custom Vintage Custom 1958 Top-Load Telecaster | |
|---|---|---|
| General | ||
| Brand: | Sterling | Fender Custom |
| Year: | 2023 | 2020 |
| Configuration: | SH | SS |
| Strings: | 6 | 6 |
| Made in: | Indonesia | United States |
| Series: | Valentine Chambered Bigsby JV60CB | Vintage Custom |
| Colors: | Yellow | White |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Semi-Hollow | Solid Body |
| Body Material: | White Ash | Ash |
| Bridge: | Tune-o-matic with bigsby tailpiece | 3-Saddle Vintage-Style Tele, Top-Load or Strings-Through-Body with Threaded Steel Saddles |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Locking | Vintage-Style |
| Fretboard: | Roasted Maple | Maple |
| Neck Material: | Roasted Maple | Rift Sawn Maple |
| Decoration: | Black Dot Markers | Black Dot |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Music Man Standard | 10/56 V |
| Frets: | 22 Medium Nickel Silver | 21 Medium Nickel Silver |
| Fretboard Radius: | 12" | 7.25" to 9.5" |
| Nut: | Compensated | Bone |
| Nut Width: | 42mm (1.654'') | 41.9mm (1.65'') |
| Electronics | ||
| Bridge Pickups: | Single Coil (Single Coil / Passive) | Fender Custom Shop Hand-Wound '58 Single-Coil Tele (Single Coil / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Humbuckers (Humbucker / Passive) | Fender Custom Shop Hand-Wound '58 Single-Coil Tele (Single Coil / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | Boost | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Nickel |
Show Diagrams Comparison
Reasons to Get
Sterling JV60CB over Fender Custom Vintage Custom 1958 Top-Load Telecaster
Reasons to Get
Fender Custom Vintage Custom 1958 Top-Load Telecaster over Sterling JV60CB
Other Key Differences
Sterling JV60CB vs Fender Custom Vintage Custom 1958 Top-Load Telecaster
Shared Features
Sterling JV60CB vs Fender Custom Vintage Custom 1958 Top-Load Telecaster
Common Strengths
- High-Quality Nut
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Stays in Tune (Evertune)
- High-Quality Frets
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Custom Vintage Custom 1958 Top-Load Telecaster favors large hands more than the Sterling JV60CB. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Sterling JV60CB:
Fender Custom Vintage Custom 1958 Top-Load Telecaster:
Beginner Friendliness
The Fender Custom Vintage Custom 1958 Top-Load Telecaster meets 6 out of our 8 criteria items for beginner friendliness, while the Sterling JV60CB meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Sterling JV60CB- Comfortable shape
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Easy-to-use bridge
New Player Friendliness
Fender Custom Vintage Custom 1958 Top-Load Telecaster- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Woods Used in the Sterling JV60CB
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Woods Used in the Fender Custom Vintage Custom 1958 Top-Load Telecaster
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Winner: Tie.
Pickup Configuration
The Sterling JV60CB has an SH configuration while the Fender Custom Vintage Custom 1958 Top-Load Telecaster has SS pickups.
SH is a more versatile version of the classic telecaster (SS) configuration. The bridge pickup usually produces a bright and twangy tone, while the neck Humbucker gives you the warmer tone you'll need for more Jazzy/Bluish solos and chords.
On the other hand, SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
Pickups Quality
The Fender Custom Vintage Custom 1958 Top-Load Telecaster pickups from a more specialized brand than the Sterling JV60CB. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Country and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender Custom Vintage Custom 1958 Top-Load Telecaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Sterling JV60CB comes with some kind of pickup modification: Boost.
A Boost will give your pickups more output, similar to an active pickup. It's great if you like to use a lot of output for heavy genres, but also like to use a cleaner tone often.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Sterling JV60CB.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Sterling JV60CB compares to the Fender Custom Vintage Custom 1958 Top-Load Telecaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Sterling JV60CB is built in Indonesia while the Fender Custom Vintage Custom 1958 Top-Load Telecaster is made in United States.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Fender Custom Vintage Custom 1958 Top-Load Telecaster
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Sterling JV60CB has a Compensated nut. Each hole where the string sits at the nut is cut at a different distance from the bridge, which compensates for the different amount of tension that each string is subject to. This fixes most intonation issues across the fretboard, so it gives great tuning stability.
On the other hand, the Fender Custom Vintage Custom 1958 Top-Load Telecaster comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Sterling JV60CB's brige is a Bigsby Tremolo. Bigsby tremolos are built differently than regular tremolos. They have a stiffer arm, which is something a lot of people like because the arm won't wiggle around a lot. On the other hand, this type of tremolo is more complicated to restring and it might not be as newbie-friendly as other simpler tremolos.
On the other hand, the Fender Custom Vintage Custom 1958 Top-Load Telecaster's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Sterling JV60CB.
Tuners
The Sterling JV60CB has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Sterling JV60CB.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Sterling JV60CB
- Locking Tuners
- Expensive Wood
- Compensated Nut
- Boost Pickups
- Tremolo
- Cheap Fret Wire (NS)
- Made in Indonesia
- No Top Brand Pickups
- No Neck-Through Build
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Custom Vintage Custom 1958 Top-Load Telecaster
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Compound Radius Fretboard
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Sterling JV60CB has the wider nut with 42mm (1.654'') vs 41.9mm (1.65''). This is a 0.1mm (0.004'') difference
This means that it will be more difficult to do bar chords on the Sterling JV60CB, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Sterling JV60CB has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Fender Custom Vintage Custom 1958 Top-Load Telecaster, on the other hand, has a V neck. This neck shape was more common during Fender's early years. Some people like it because they use their thumb over the edge of the fretboard to press the lower strings. It's rather thicker than most modern necks, so it's not usually used for playing fast solos.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Custom Vintage Custom 1958 Top-Load Telecaster is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
