Show Full Spec Comparison
| Sire Marcus Miller V5R 5-String | Fender Player Jazz Bass V | |
|---|---|---|
| General | ||
| Brand: | Sire | Fender |
| Year: | 2023 | 2021 |
| Configuration: | SS | SS |
| Strings: | 5 | 5 |
| Made in: | Indonesia | Mexico |
| Series: | V | Player |
| Colors: | Sunburst, Green, Natural | White, Sunburst |
| Left-Handed Version: | Yes | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | North American Alder | Alder |
| Bridge: | Marcus Miller Vintage-S | 5-Saddle Vintage-Style |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Premium Open-Gear | Standard Open-Gear |
| Fretboard: | Rosewood, Edgeless (Rolled Fretboard Edges) | Pau Ferro |
| Neck Material: | Roasted Hard Maple | Maple |
| Decoration: | WH.P Square Block | White Dot |
| Scale Size: | 34" | 34" |
| Shape: | Bass C-Shape | Bass Modern C |
| Frets: | 22 Medium Nickel Silver | 20 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 9.5" | 9.5" |
| Nut: | Bone | Synthetic Bone |
| Nut Width: | 46mm (1.811'') | 47.6mm (1.875'') |
| Electronics | ||
| Bridge Pickups: | Marcus Vintage-J Revolution (Single Coil / Passive) | Fender Player Series Alnico 5 Single-Coil Jazz Bass (Single Coil / Passive) |
| Middle Pickup: | Fender Player Series Alnico 5 Single-Coil Jazz Bass (Single Coil / Passive) | |
| Neck Pickup: | Marcus Vintage-J Revolution (Single Coil / Passive) | |
| Switch: | 0 Way | 0 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 2 | 2 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Chrome |
Reasons to Get
Sire Marcus Miller V5R 5-String over Fender Player Jazz Bass V
Reasons to Get
Fender Player Jazz Bass V over Sire Marcus Miller V5R 5-String
Other Key Differences
Sire Marcus Miller V5R 5-String vs Fender Player Jazz Bass V
Shared Features
Sire Marcus Miller V5R 5-String vs Fender Player Jazz Bass V
Common Strengths
- High-Quality Nut
- Top Pickup Brand
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Retainer Bar
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor large hands .
Sire Marcus Miller V5R 5-String:
Fender Player Jazz Bass V:
Beginner Friendliness
Both meet 4 out of our 6 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first bass to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Sire Marcus Miller V5R 5-String- Comfortable shape
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
New Player Friendliness
Fender Player Jazz Bass V- Comfortable shape
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Sire Marcus Miller V5R 5-String
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Fender Player Jazz Bass V
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Pau Ferro has a dark, chocolate-like color with straight dark grains that is being used as a replacement to Rosewood due to the regulations. It produces a warm tone that is somewhere between Mahogany and Rosewood. Find out more about Pau Ferro.
Winner: Sire Marcus Miller V5R 5-String.
Pickup Configuration
Both pickup configurations are SS. SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
Pickups Quality
Both come with some of the top pickups on the market. You can't go wrong with either of them. You'll probably never need a pickup upgrade.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Preamp Circuit
A preamp in an electric bass functions as an electronic circuit that acts as an interface between the bass's pickups and the amplifier. Its main purpose is to amplify and customize the bass's initial signal before it reaches the amplifier, offering enhanced control over factors like tone, volume, and sound attributes. Preamps typically come equipped with tone adjustments, equalization options, and sometimes built-in effects, empowering bass players to fine-tune their sound to suit their personal preferences and the musical environment.
Both basses have a Passive preamp.
Passive: A bass with a passive preamp lacks an onboard electronic circuit for tone shaping and signal boosting. Instead, it relies solely on passive pickups and basic tone controls, typically consisting of volume and tone knobs. Passive preamps don't require an external power source like batteries, making them low-maintenance and dependable. While they offer a simpler and more straightforward tonal character, passive basses are appreciated for their warm and vintage sound, often favored in genres like classic rock, blues, and funk. They are an excellent choice for musicians who value the simplicity and timeless appeal of their instrument's tone without the need for active electronic components.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Sire Marcus Miller V5R 5-String compares to the Fender Player Jazz Bass V.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Sire Marcus Miller V5R 5-String is built in Indonesia while the Fender Player Jazz Bass V is made in Mexico.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Winner: Tie
Nut Material
If you want your bass to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Sire Marcus Miller V5R 5-String has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
On the other hand, the Fender Player Jazz Bass V comes with a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Sire Marcus Miller V5R 5-String's are Premium Open-Gear while the Fender Player Jazz Bass V's are Standard Open-Gear
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a bass is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Sire Marcus Miller V5R 5-String
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Active Preamp
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Fender Player Jazz Bass V
- Synthetic Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Active Preamp
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a bass might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a bass feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Fender Player Jazz Bass V has the wider nut with 47.6mm (1.875'') vs 46mm (1.811''). This is a 1.6mm (0.064'') difference
This means that it will be more difficult to do bar chords on the Fender Player Jazz Bass V, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 34".
This is a scale used for baritones and guitars with more than 6 strings. Since the scale is so long, the tension of the strings will be higher. This means that bending will require a lot more strength than with a shorter scale. However, it also allows you to use really low tunings without causing fret buzz and without needing to increase your string gauge too much.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Sire Marcus Miller V5R 5-String and the Fender Player Jazz Bass V have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most bass fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Sire Marcus Miller V5R 5-String and the Fender Player Jazz Bass V have the same fretboard radius of 9.5". This is the most common radius for Stratocaster guitars. It's considered curved when compared to most other models. This allows you to play chords very easily without muting strings accidentally and gives you more space between strings for fingerpicking. However, this curve also gives the guitar less allowance for lower action. If you bend too hard at the high frets, some of your notes might get muted because the curve will make the string fret out.
Fret Size
The Fender Player Jazz Bass V has Medium Jumbo frets, which should be taller than the Sire Marcus Miller V5R 5-String's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
