Show Full Spec Comparison
| Sire Larry Carlton X5 | D'Angelico Excel SS | |
|---|---|---|
| General | ||
| Brand: | Sire | D'Angelico |
| Year: | 2024 | 2021 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | Indonesia | South Korea |
| Series: | X | Excel |
| Colors: | Black, Blue | Natural |
| Left-Handed Version: | Yes | No |
| Body | ||
| Type: | Solid Body | Semi-Hollow |
| Body Material: | Mahogany with Ash Veneer | Laminated Flame Maple |
| Bridge: | Floydrose Special | Gold Tune-O-Matic |
| Neck | ||
| Neck Joint: | Bolt-On | Set |
| Tuners: | Sire Standard Tuner | Grover 150 Imperial |
| Fretboard: | Rosewood Edgeless (Rolled Fretboard Edges) | Ebony |
| Neck Material: | Hard Maple | Maple |
| Decoration: | WH Pearloid/Abalone Rounded-rectangular Block | Mother of Pearl/Abalone Split-Block |
| Scale Size: | 25.5" | 25" |
| Shape: | C-Shape | C-Shape |
| Thickness: | 1st Fret: 0.9'' (22.9mm) - 12th Fret: 0.94'' (23.9mm) | 1st Fret: - 12th Fret: |
| Frets: | 22 Medium Jumbo Nickel Silver | 22 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 14" | 16" |
| Nut: | Locking | Ivory Tusq |
| Nut Width: | 41.3mm (1.626'') | 42.9mm (1.688'') |
| Electronics | ||
| Bridge Pickups: | LC Modern Humbucker (Humbucker / Passive) | USA Seymour Duncan 59 Humbucker (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | LC Modern Humbucker (Humbucker / Passive) | USA Seymour Duncan 59 Humbucker (Humbucker / Passive) |
| Switch: | 5 Way | 3 Way |
| Knobs: | Dome | Speed |
| Pickup Mods: | None | Coil Split |
| Volume Controls: | 1 | 2 |
| Tone Controls: | 1 | 2 |
| Hardware | ||
| Strap Lock: | No | Yes |
| Hardware Color: | Black | Gold |
Show Diagrams Comparison
Reasons to Get
Sire Larry Carlton X5 over D'Angelico Excel SS
Reasons to Get
D'Angelico Excel SS over Sire Larry Carlton X5
Other Key Differences
Sire Larry Carlton X5 vs D'Angelico Excel SS
Shared Features
Sire Larry Carlton X5 vs D'Angelico Excel SS
Common Strengths
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Sire Larry Carlton X5:
D'Angelico Excel SS:
Beginner Friendliness
Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Sire Larry Carlton X5- Comfortable shape
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
- Easy-to-use bridge
New Player Friendliness
D'Angelico Excel SS- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Sire Larry Carlton X5
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the D'Angelico Excel SS
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
This wood has beautiful patterns only found in specific types of maple.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Sire Larry Carlton X5 gives you 5 switch options while the D'Angelico Excel SS gives you 3. This means that the Sire Larry Carlton X5 gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the D'Angelico Excel SS comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Sire Larry Carlton X5.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Sire Larry Carlton X5 compares to the D'Angelico Excel SS.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Sire Larry Carlton X5 is built in Indonesia while the D'Angelico Excel SS is made in South Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Sire Larry Carlton X5 has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
On the other hand, the D'Angelico Excel SS comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Sire Larry Carlton X5's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
On the other hand, the D'Angelico Excel SS's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Sire Larry Carlton X5.
Tuners
Both come with regular tuners. The Sire Larry Carlton X5's are Sire Standard Tuner while the D'Angelico Excel SS's are Grover 150 Imperial
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Sire Larry Carlton X5 has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
On the other hand, the D'Angelico Excel SS comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Sire Larry Carlton X5.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Sire Larry Carlton X5
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
D'Angelico Excel SS
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Coil Split Pickups
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in South Korea
- No Neck-Through Build
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the D'Angelico Excel SS has the wider nut with 42.9mm (1.688'') vs 41.3mm (1.626''). This is a 1.6mm (0.062'') difference
This means that it will be more difficult to do bar chords on the D'Angelico Excel SS, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Sire Larry Carlton X5 has the longest scale: 25.5". The D'Angelico Excel SS is only 25" long. This is a 0.5'' (12.7mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Sire Larry Carlton X5 and the D'Angelico Excel SS have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Sire Larry Carlton X5's fingerboard radius is smaller, which means it's more curved than the D'Angelico Excel SS's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the D'Angelico Excel SS.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Fret Size
Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.
