Schecter Ultra-III vs Reverend Pete Anderson PA-1
Reasons to Get
Schecter Ultra-III over Reverend Pete Anderson PA-1
Reasons to Get
Reverend Pete Anderson PA-1 over Schecter Ultra-III
Other Key Differences
Schecter Ultra-III vs Reverend Pete Anderson PA-1
Shared Features
Schecter Ultra-III vs Reverend Pete Anderson PA-1
Common Strengths
- High-Quality Nut
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Reverend Pete Anderson PA-1 is probably the better product overall with its final score of 73 compared to the Schecter Ultra-III's 69 score, although not by a lot.
The Reverend Pete Anderson PA-1 wins when it comes to sound, playability, build quality. On the other hand, the Schecter Ultra-III has the upper hand when it comes to value for the money.
If you got small hands, you'll probably feel that the Schecter Ultra-III is easier to play.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Reverend Pete Anderson PA-1 is the better choice.
The Reverend Pete Anderson PA-1 meets 4 out of our 8 criteria items for beginner friendliness, while the Schecter Ultra-III meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter Ultra-III- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Short scale
- Locking tuners
- Easy-to-use bridge
New Player Friendliness
Reverend Pete Anderson PA-1- Comfortable shape
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Easy-to-use bridge
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Schecter Ultra-III Overview
- From Schecter's 2009 Retro series
- Made in South Korea
- 6 strings
- 25.5"'' scale
- 14" Fretboard Radius
- Mahogany body
- Mahogany 3-pc neck
- Rosewood fretboard
- Bridge pickup: Schecter Diamond Mini FilterTron (Humbucker/Passive)
- Middle pickup: Schecter Diamond Mini FilterTron (Humbucker/Passive)
- Neck pickup: Schecter Diamond Mini FilterTron (Humbucker/Passive)
- 1 volume and 1 tone Bell knobs
- 5-way Switch
- Bigsby Flat Top B50 w/ Roller TOM bridge
- Thin C Set neck
- 22 XL Jumbo frets
- Grover tuners
- Weight between 8.35lbs (3.8kgs) and 9.1lbs (4.1kgs)
- Compare Specs >
Reverend Pete Anderson PA-1 Overview
- From Reverend's 2021 Signature series
- Pete Anderson Signature
- Made in South Korea
- 6 strings
- 24.75"'' scale
- 12" Fretboard Radius
- Laminated Maple Back/Sides, Laminated Spruce Top body
- Three-Piece Korina neck
- Rosewood fretboard
- Bridge pickup: 9A5 Bridge (Single Coil/Passive)
- 1 volume and 2 tone Dome knobs
- 3-way Switch
- Bigsby B-70 with Roller Bridge bridge
- Medium Oval Set neck
- 22 Jumbo frets
- Reverend Pin-Lock tuners
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Schecter Ultra-III
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Reverend Pete Anderson PA-1
Limba is a relatively rare wood that shows exotic tight dark grain stripes. It comes in white or black. As a tonewood, it is comparable to Mahogany but with richer mids. Find out more about Limba.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Winner: Tie.
Pickup Configuration
The Schecter Ultra-III has an HHH configuration while the Reverend Pete Anderson PA-1 has P90P90 pickups.
A triple Humbucker (HHH) can be intimidating at first, but it's one of the combinations that offer the most tone versatility. You'll be able to have from a lot of output for Hard Rock genres, to warm and clean sounds that are more common in Jazz.
On the other hand, P90P90 gives you two P90s for a crunchy vintage tone. The tone sits somewhere in the middle between typical single-coils and humbuckers. They also produce less hum than single-coils, but they don't cancel it completely like humbuckers.
Pickups Quality
The Reverend Pete Anderson PA-1 pickups from a more specialized brand than the Schecter Ultra-III. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Reverend Pete Anderson PA-1.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Schecter Ultra-III gives you 5 switch options while the Reverend Pete Anderson PA-1 gives you 3. This means that the Schecter Ultra-III gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the Schecter Ultra-III comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter Ultra-III.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Ultra-III compares to the Reverend Pete Anderson PA-1.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in South Korea.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter Ultra-III has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Reverend Pete Anderson PA-1 comes with a Boneite nut. This is an artificial material made to imitate the favored type of nut: bone. This allows it to sound and feel pretty much like bone, but without the inconsistency of natural materials.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Bigsby Tremolo. Bigsby tremolos are built differently than regular tremolos. They have a stiffer arm, which is something a lot of people like because the arm won't wiggle around a lot. On the other hand, this type of tremolo is more complicated to restring and it might not be as newbie-friendly as other simpler tremolos.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Reverend Pete Anderson PA-1 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Reverend Pete Anderson PA-1.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Ultra-III
- Expensive Wood
- Black Tusq XL Nut
- Coil Split Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in South Korea
- No Top Brand Pickups
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Reverend Pete Anderson PA-1
- Locking Tuners
- Expensive Wood
- Boneite Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- Made in South Korea
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Reverend Pete Anderson PA-1 has the wider nut with 43mm (1.693'') vs 42mm (1.654''). This is a 1mm (0.039'') difference
This means that it will be more difficult to do bar chords on the Reverend Pete Anderson PA-1, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Schecter Ultra-III has the longest scale: 25.5". The Reverend Pete Anderson PA-1 is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter Ultra-III and the Reverend Pete Anderson PA-1 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Reverend Pete Anderson PA-1's fingerboard radius is smaller, which means it's more curved than the Schecter Ultra-III's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Ultra-III.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Reverend Pete Anderson PA-1 favors large hands more than the Schecter Ultra-III.
Schecter Ultra-III:
Reverend Pete Anderson PA-1:
Fret Size
The Schecter Ultra-III has XL Jumbo frets, which should be taller than the Reverend Pete Anderson PA-1's Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
