Show Full Spec Comparison
| Schecter Stargazer-6 Vibrato | Jackson USA Signature Jeff Loomis Kelly | |
|---|---|---|
| General | ||
| Brand: | Schecter | Jackson |
| Year: | 2024 | 2019 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | Indonesia | United States |
| Series: | Diamond | Artist Signature |
| Colors: | Yellow | Black |
| Left-Handed Version: | Yes | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Mahogany | Ash |
| Bridge: | Schecter Vibrato with TonePros Roller Tune-O-Matic | Floyd Rose 1500 Series Double-Locking Tremolo |
| Neck | ||
| Neck Joint: | Neck-Through | Neck-Through |
| Tuners: | TonePros "M Series" | Sperzel Die-Cast |
| Fretboard: | Ebony | Ebony |
| Neck Material: | Maple 3-pc | Quartersawn Maple |
| Decoration: | Blocks | Mother of Pearl Sharkfin |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Thin "C" | Speed |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) | 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm) |
| Frets: | 22 Jumbo Nickel Silver | 24 Jumbo Stainless Steel |
| Fretboard Radius: | 14" | 12" to 16" |
| Nut: | Black Tusq XL | Locking |
| Nut Width: | 42mm (1.654'') | 42.9mm (1.688'') |
| Electronics | ||
| Bridge Pickups: | Schecter USA SuperRock Vintage (Humbucker / Passive) | Seymour Duncan Jeff Loomis Signature Blackouts (Humbucker / Active) |
| Middle Pickup: | ||
| Neck Pickup: | Schecter USA SuperRock Vintage (Humbucker / Passive) | Seymour Duncan Jeff Loomis Signature Blackouts (Humbucker / Active) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | Coil Split | None |
| Volume Controls: | 2 | 1 |
| Tone Controls: | 1 | 0 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Black |
Show Diagrams Comparison
Reasons to Get
Schecter Stargazer-6 Vibrato over Jackson USA Signature Jeff Loomis Kelly
Reasons to Get
Jackson USA Signature Jeff Loomis Kelly over Schecter Stargazer-6 Vibrato
Other Key Differences
Schecter Stargazer-6 Vibrato vs Jackson USA Signature Jeff Loomis Kelly
Shared Features
Schecter Stargazer-6 Vibrato vs Jackson USA Signature Jeff Loomis Kelly
Common Strengths
- Neck-Through Build
- High-Quality Nut
- High-Quality Frets
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Jackson USA Signature Jeff Loomis Kelly favors large hands more than the Schecter Stargazer-6 Vibrato. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Schecter Stargazer-6 Vibrato:
Jackson USA Signature Jeff Loomis Kelly:
Beginner Friendliness
The Jackson USA Signature Jeff Loomis Kelly meets 4 out of our 8 criteria items for beginner friendliness, while the Schecter Stargazer-6 Vibrato meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter Stargazer-6 Vibrato- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Short scale
- Locking tuners
- Easy-to-use bridge
New Player Friendliness
Jackson USA Signature Jeff Loomis Kelly- Comfortable shape
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Schecter Stargazer-6 Vibrato
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Jackson USA Signature Jeff Loomis Kelly
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Schecter Stargazer-6 Vibrato has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
We found the same or similar pickups to the Jackson USA Signature Jeff Loomis Kelly's online:
The Schecter Stargazer-6 Vibrato's pickups are Passive while the Jackson USA Signature Jeff Loomis Kelly's are Active.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Schecter Stargazer-6 Vibrato.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Schecter Stargazer-6 Vibrato comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter Stargazer-6 Vibrato.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Stargazer-6 Vibrato compares to the Jackson USA Signature Jeff Loomis Kelly.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter Stargazer-6 Vibrato is built in Indonesia while the Jackson USA Signature Jeff Loomis Kelly is made in United States.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Jackson USA Signature Jeff Loomis Kelly
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter Stargazer-6 Vibrato has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Jackson USA Signature Jeff Loomis Kelly comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Jackson USA Signature Jeff Loomis Kelly is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Jackson USA Signature Jeff Loomis Kelly.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter Stargazer-6 Vibrato's brige is a Bigsby Tremolo. Bigsby tremolos are built differently than regular tremolos. They have a stiffer arm, which is something a lot of people like because the arm won't wiggle around a lot. On the other hand, this type of tremolo is more complicated to restring and it might not be as newbie-friendly as other simpler tremolos.
On the other hand, the Jackson USA Signature Jeff Loomis Kelly's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Schecter Stargazer-6 Vibrato's are TonePros "M Series" while the Jackson USA Signature Jeff Loomis Kelly's are Sperzel Die-Cast
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Stargazer-6 Vibrato
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Neck-Through Build
- Coil Split Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Jackson USA Signature Jeff Loomis Kelly
- Stainless Steel Frets
- Made in United States
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Luminescent Inlay
- Tremolo
- Compound Radius Fretboard
- No Locking Tuners
- No Push Knob or Extra Switch Option
- No Weight Relief
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Jackson USA Signature Jeff Loomis Kelly has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference
This means that it will be more difficult to do bar chords on the Jackson USA Signature Jeff Loomis Kelly, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Schecter Stargazer-6 Vibrato has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Jackson USA Signature Jeff Loomis Kelly, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Jackson USA Signature Jeff Loomis Kelly is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.
