Show Full Spec Comparison
| Schecter Riot-4 Session | Riot-4 Bass | |
|---|---|---|
| General | ||
| Brand: | Schecter | Schecter |
| Year: | 2021 | 2019 |
| Configuration: | HH | HH |
| Strings: | 4 | 4 |
| Made in: | Indonesia | South Korea |
| Series: | Session | Riot |
| Colors: | Natural | Burst |
| Left-Handed Version: | Yes | Yes |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Swamp Ash | Swamp Ash |
| Bridge: | Schecter Custom Bass String Thru (or Top Load) | Schecter Custom Bass String Thru (or Top Load) |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Schecter | Schecter |
| Fretboard: | Maple | Ebony |
| Neck Material: | Maple | Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods |
| Decoration: | Ebony Side Blocks | Offset/Reverse Dots |
| Scale Size: | 34" | 34" |
| Shape: | Bass "C" | Bass Thin "C" |
| Thickness: | 1st Fret: 0.826'' (21mm) - 12th Fret: 0.905'' (23mm) | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.905'' (23mm) |
| Frets: | 24 Narrow Tall Nickel Silver | 24 XL Jumbo Nickel Silver |
| Fretboard Radius: | 12" | 16" |
| Nut: | Black Tusq XL | Black Tusq XL |
| Nut Width: | 38mm (1.496'') | 38mm (1.496'') |
| Electronics | ||
| Bridge Pickups: | EMG 35DC (Humbucker / Passive) | EMG 35JX-CS (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | EMG 35J (Humbucker / Passive) | EMG 35PX-CS (Humbucker / Passive) |
| Switch: | 0 Way | 0 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 4 | 4 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Black |
Reasons to Get
Schecter Riot-4 Session over Riot-4 Bass
Reasons to Get
Schecter Riot-4 Bass over Riot-4 Session
Other Key Differences
Schecter Riot-4 Session vs Riot-4 Bass
Shared Features
Schecter Riot-4 Session vs Riot-4 Bass
Common Strengths
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Retainer Bar
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter Riot-4 Session favors large hands more than the Schecter Riot-4 Bass.
Schecter Riot-4 Session:
Schecter Riot-4 Bass:
Beginner Friendliness
Both meet 3 out of our 6 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first bass to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Schecter Riot-4 Session- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Schecter Riot-4 Bass- Comfortable shape
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Woods Used in the Schecter Riot-4 Bass
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Winner: Schecter Riot-4 Bass.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Preamp Circuit
A preamp in an electric bass functions as an electronic circuit that acts as an interface between the bass's pickups and the amplifier. Its main purpose is to amplify and customize the bass's initial signal before it reaches the amplifier, offering enhanced control over factors like tone, volume, and sound attributes. Preamps typically come equipped with tone adjustments, equalization options, and sometimes built-in effects, empowering bass players to fine-tune their sound to suit their personal preferences and the musical environment.
Both basses have a Active preamp.
Active: Unlike passive basses, which rely solely on passive pickups and tone controls, active preamps require a power source, typically a 9-volt battery, to operate. The active preamp offers several advantages, including the ability to boost or cut specific frequencies, resulting in a more versatile and customizable tonal palette. Active basses are favored in genres where precise tonal sculpting and extended tonal options are essential, such as jazz fusion or progressive rock. However, they do require occasional battery replacement or recharging to ensure optimal performance.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Riot-4 Session compares to the Schecter Riot-4 Bass.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter Riot-4 Session is built in Indonesia while the Schecter Riot-4 Bass is made in South Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Tie
Nut Material
If you want your bass to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Black Tusq XL nuts. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. Both come with Schecter.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a bass is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Riot-4 Session
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Active Preamp
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Schecter Riot-4 Bass
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Active Preamp
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in South Korea
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a bass might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a bass feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 38mm (1.496'').
This is within the most common range of nut widths for a 4-string bass. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 34".
This is a scale used for baritones and guitars with more than 6 strings. Since the scale is so long, the tension of the strings will be higher. This means that bending will require a lot more strength than with a shorter scale. However, it also allows you to use really low tunings without causing fret buzz and without needing to increase your string gauge too much.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter Riot-4 Session and the Schecter Riot-4 Bass have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most bass fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Schecter Riot-4 Session's fingerboard radius is smaller, which means it's more curved than the Schecter Riot-4 Bass's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Riot-4 Bass.
Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.
Fret Size
The Schecter Riot-4 Bass has XL Jumbo frets, which should be taller than the Schecter Riot-4 Session's Narrow Tall frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
