Show Full Spec Comparison
| Schecter Riggs Ultra FR-S | PRS NF 53 | |
|---|---|---|
| General | ||
| Brand: | Schecter | PRS |
| Year: | 2024 | 2024 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | South Korea | United States |
| Series: | Artist | NF |
| Colors: | Black | White, Black, Blue, Natural |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Mahogany | Swamp Ash |
| Bridge: | Floyd Rose 1500 Locking | Body |
| Neck | ||
| Neck Joint: | Neck-Through | Bolt-On |
| Tuners: | Grover | PRS Vintage-Style Non-Locking Tuners with Wing Buttons |
| Fretboard: | Ebony | Maple |
| Neck Material: | Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods | Maple |
| Decoration: | Pearloid X with 666 at 12th Fret | Birds |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Thin "C" | Pattern 53 |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) | 1st Fret: 0.875'' (22.2mm) - 12th Fret: 0.969'' (24.6mm) |
| Frets: | 22 XL Jumbo Stainless Steel | 22 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 14" | 10" |
| Nut: | Locking | Bone |
| Nut Width: | 41.3mm (1.626'') | 41.7mm (1.641'') |
| Electronics | ||
| Bridge Pickups: | Schecter USA Brimstone (Humbucker / Passive) | Narrowfield DD (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Sustainiac (Humbucker / Passive) | Narrowfield DD (Humbucker / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Speed | |
| Pickup Mods: | Killswitch, Sustainer | None |
| Volume Controls: | 0 | 1 |
| Tone Controls: | 0 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Chrome |
Show Diagrams Comparison
Reasons to Get
Schecter Riggs Ultra FR-S over PRS NF 53
Reasons to Get
PRS NF 53 over Schecter Riggs Ultra FR-S
Other Key Differences
Schecter Riggs Ultra FR-S vs PRS NF 53
Shared Features
Schecter Riggs Ultra FR-S vs PRS NF 53
Common Strengths
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the PRS NF 53 favors large hands more than the Schecter Riggs Ultra FR-S. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Schecter Riggs Ultra FR-S:
PRS NF 53:
Beginner Friendliness
The PRS NF 53 meets 5 out of our 8 criteria items for beginner friendliness, while the Schecter Riggs Ultra FR-S meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter Riggs Ultra FR-S- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Short scale
- Locking tuners
- Easy-to-use bridge
New Player Friendliness
PRS NF 53- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Schecter Riggs Ultra FR-S
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the PRS NF 53
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Winner: Schecter Riggs Ultra FR-S.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Schecter Riggs Ultra FR-S comes with some kind of pickup modification: Killswitch, Sustainer.
A Killswitch lets you disengage the pickups instantly. It can be useful when playing live, and it allows you to create some cool sound effects by using the switch rapidly.
The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter Riggs Ultra FR-S.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Riggs Ultra FR-S compares to the PRS NF 53.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter Riggs Ultra FR-S is built in South Korea while the PRS NF 53 is made in United States.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: PRS NF 53
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter Riggs Ultra FR-S has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
On the other hand, the PRS NF 53 comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter Riggs Ultra FR-S is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter Riggs Ultra FR-S.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter Riggs Ultra FR-S's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
On the other hand, the PRS NF 53's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Schecter Riggs Ultra FR-S.
Tuners
Both come with regular tuners. The Schecter Riggs Ultra FR-S's are Grover while the PRS NF 53's are PRS Vintage-Style Non-Locking Tuners with Wing Buttons
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Schecter Riggs Ultra FR-S has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the PRS NF 53 comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Schecter Riggs Ultra FR-S.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Riggs Ultra FR-S
- Stainless Steel Frets
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Killswitch, Sustainer Pickups
- Luminescent Inlay
- Tremolo
- Retainer Bar
- No Locking Tuners
- Made in South Korea
- No Weight Relief
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
PRS NF 53
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the PRS NF 53 has the wider nut with 41.7mm (1.641'') vs 41.3mm (1.626''). This is a 0.40000000000001mm (0.015'') difference
This means that it will be more difficult to do bar chords on the PRS NF 53, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter Riggs Ultra FR-S and the PRS NF 53 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the PRS NF 53's fingerboard radius is smaller, which means it's more curved than the Schecter Riggs Ultra FR-S's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Riggs Ultra FR-S.
Fret Size
The Schecter Riggs Ultra FR-S has XL Jumbo frets, which should be taller than the PRS NF 53's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
