Show Full Spec Comparison
Schecter PT Standard | Fender Albert Hammond Jr Stratocaster | |
---|---|---|
General | ||
Brand: | Schecter | Fender |
Year: | 2024 | 2018 |
Configuration: | HH | SSS |
Strings: | 6 | 6 |
Made in: | China | Mexico |
Series: | Diamond | Artist |
Colors: | Black, Purple | White |
Left-Handed Version: | No | No |
Body | ||
Type: | Solid Body | Solid Body |
Body Material: | Mahogany | Alder |
Bridge: | Schecter Diamond Hardtail | 6-Saddle Vintage-Style Synchronized Tremolo Set Flat to Body |
Neck | ||
Neck Joint: | Bolt-On | Bolt-On |
Tuners: | Schecter | Fender Vintage F Stamped |
Fretboard: | Rosewood | Rosewood |
Neck Material: | Roasted Maple | Maple |
Decoration: | White Dots | White Dot |
Scale Size: | 25.5" | 25.5" |
Shape: | Thin "C" | Modern C |
Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) | 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.87'' (22.1mm) |
Frets: | 22 Jumbo Nickel Silver | 21 Medium Jumbo Nickel Silver |
Fretboard Radius: | 14" | 7.25" |
Nut: | Graphite | Synthetic Bone |
Nut Width: | 42mm (1.654'') | 42mm (1.654'') |
Electronics | ||
Bridge Pickups: | Schecter Diamond Standard with Black Metal Cover (Humbucker / Passive) | Fender Custom Ceramic Single-Coil (Single Coil / Passive) |
Middle Pickup: | Fender Custom Ceramic Single-Coil (Single Coil / Passive) | |
Neck Pickup: | Schecter Diamond Standard with Black Metal Cover (Humbucker / Passive) | Fender Custom Ceramic Single-Coil (Single Coil / Passive) |
Switch: | 3 Way | 5 Way |
Knobs: | Dome | Bell |
Pickup Mods: | None | None |
Volume Controls: | 1 | 1 |
Tone Controls: | 1 | 2 |
Hardware | ||
Strap Lock: | No | No |
Hardware Color: | Black | Chrome |
Show Diagrams Comparison
Reasons to Get
Schecter PT Standard over Fender Albert Hammond Jr Stratocaster
Reasons to Get
Fender Albert Hammond Jr Stratocaster over Schecter PT Standard
Other Key Differences
Schecter PT Standard vs Fender Albert Hammond Jr Stratocaster
Shared Features
Schecter PT Standard vs Fender Albert Hammond Jr Stratocaster
Common Strengths
- Expensive Wood
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Albert Hammond Jr Stratocaster favors large hands more than the Schecter PT Standard. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Schecter PT Standard:
Fender Albert Hammond Jr Stratocaster:
Beginner Friendliness
Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Schecter PT Standard- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
New Player Friendliness
Fender Albert Hammond Jr Stratocaster- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Woods Used in the Schecter PT Standard
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Fender Albert Hammond Jr Stratocaster
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Winner: Schecter PT Standard.
Pickup Configuration
The Schecter PT Standard has an HH configuration while the Fender Albert Hammond Jr Stratocaster has SSS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.
Pickups Quality
The Fender Albert Hammond Jr Stratocaster pickups from a more specialized brand than the Schecter PT Standard. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Funk and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender Albert Hammond Jr Stratocaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender Albert Hammond Jr Stratocaster gives you 5 switch options while the Schecter PT Standard gives you 3. This means that the Fender Albert Hammond Jr Stratocaster gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Albert Hammond Jr Stratocaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter PT Standard compares to the Fender Albert Hammond Jr Stratocaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter PT Standard is built in China while the Fender Albert Hammond Jr Stratocaster is made in Mexico.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Winner: Fender Albert Hammond Jr Stratocaster
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter PT Standard has a Graphite nut. It's a self-lubricating material that will allow the strings to slide over the nut without a lot of friction. It's a good type of nut if you want to have better tuning stability than with plastic, although it's not as resistant as Bone or Tusq.
On the other hand, the Fender Albert Hammond Jr Stratocaster comes with a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
Winner: Fender Albert Hammond Jr Stratocaster.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter PT Standard's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Fender Albert Hammond Jr Stratocaster's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. The Schecter PT Standard's are Schecter while the Fender Albert Hammond Jr Stratocaster's are Fender Vintage F Stamped
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter PT Standard
- Expensive Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No High-Quality Nut
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Albert Hammond Jr Stratocaster
- Expensive Wood
- Synthetic Bone Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').
This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter PT Standard and the Fender Albert Hammond Jr Stratocaster have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Albert Hammond Jr Stratocaster's fingerboard radius is smaller, which means it's more curved than the Schecter PT Standard's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter PT Standard.
Fret Size
The Schecter PT Standard has Jumbo frets, which should be taller than the Fender Albert Hammond Jr Stratocaster's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.