Show Full Spec Comparison
| Schecter PT Black Ops | Jackson American Series Soloist SL3 | |
|---|---|---|
| General | ||
| Brand: | Schecter | Jackson |
| Year: | 2024 | 2022 |
| Configuration: | H | HSS |
| Strings: | 6 | 6 |
| Made in: | Indonesia | United States |
| Series: | Diamond | American |
| Colors: | Black | White, Black, Blue, Green |
| Left-Handed Version: | Yes | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Mahogany | Alder |
| Bridge: | Hipshot Hardtail | Floyd Rose 1500 Series Double-Locking Tremolo |
| Neck | ||
| Neck Joint: | Set | Neck-Through |
| Tuners: | Schecter Locking | Gotoh MG-T Locking |
| Fretboard: | Ebony | Ebony |
| Neck Material: | Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods | 3-piece Maple |
| Decoration: | None | Inverted Mother of Pearl Sharkfin |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Thin "C" | Jackson Standard |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.85'' (21.6mm) |
| Frets: | 24 XL Jumbo Stainless Steel | 24 Jumbo Nickel Silver |
| Fretboard Radius: | 14" | 12" to 16" |
| Nut: | Black Tusq XL | Locking |
| Nut Width: | 42mm (1.654'') | 42.9mm (1.688'') |
| Electronics | ||
| Bridge Pickups: | Fishman Fluence Open Core Modern-6 (Humbucker / Active) | Seymour Duncan JB TB-4 (Humbucker / Passive) |
| Middle Pickup: | Seymour Duncan Custom Flat Strat SSL-6 RWRP (Single Coil / Passive) | |
| Neck Pickup: | Seymour Duncan Custom Flat Strat SSL-6 (Single Coil / Passive) | |
| Switch: | 3 Way | 5 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 0 | 1 |
| Hardware | ||
| Strap Lock: | No | Yes |
| Hardware Color: | Black | Black |
Show Diagrams Comparison
Reasons to Get
Schecter PT Black Ops over Jackson American Series Soloist SL3
Reasons to Get
Jackson American Series Soloist SL3 over Schecter PT Black Ops
Other Key Differences
Schecter PT Black Ops vs Jackson American Series Soloist SL3
Shared Features
Schecter PT Black Ops vs Jackson American Series Soloist SL3
Common Strengths
- High-Quality Nut
- Luminescent Sidedots
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Jackson American Series Soloist SL3 favors large hands more than the Schecter PT Black Ops. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Schecter PT Black Ops:
Jackson American Series Soloist SL3:
Beginner Friendliness
The Schecter PT Black Ops meets 6 out of our 8 criteria items for beginner friendliness, while the Jackson American Series Soloist SL3 meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter PT Black Ops- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
New Player Friendliness
Jackson American Series Soloist SL3- Comfortable shape
- Locking tuners
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Schecter PT Black Ops
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Jackson American Series Soloist SL3
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Winner: Schecter PT Black Ops.
Pickup Configuration
The Schecter PT Black Ops has an H configuration while the Jackson American Series Soloist SL3 has HSS pickups.
A single H pickup gives you the advantage of having a little longer sustain (all other things being equal) because there will be less magnetic fields from other pickups affecting the strings' vibration. However, they also give you the least versatility because you won't have other pickups at different distances from the bridge to create different tones. A single humbucking pickup is used for noiseless high output, which is used mainly for Hard Rock genres.
On the other hand, HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
We found the same or similar pickups to the Jackson American Series Soloist SL3's online:
The Schecter PT Black Ops's pickups are Active while the Jackson American Series Soloist SL3's are Passive.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Jackson American Series Soloist SL3 gives you 5 switch options while the Schecter PT Black Ops gives you 3. This means that the Jackson American Series Soloist SL3 gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Jackson American Series Soloist SL3.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter PT Black Ops compares to the Jackson American Series Soloist SL3.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter PT Black Ops is built in Indonesia while the Jackson American Series Soloist SL3 is made in United States.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Jackson American Series Soloist SL3
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter PT Black Ops has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Jackson American Series Soloist SL3 comes with a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter PT Black Ops is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter PT Black Ops.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter PT Black Ops's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Jackson American Series Soloist SL3's is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Jackson American Series Soloist SL3.
Tuners
They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Schecter PT Black Ops has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Jackson American Series Soloist SL3 comes with Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
Winner: Jackson American Series Soloist SL3.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter PT Black Ops
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Luminescent Inlay
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Jackson American Series Soloist SL3
- Locking Tuners
- Made in United States
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Luminescent Inlay
- Tremolo
- Compound Radius Fretboard
- Strap Lock
- Cheap Fret Wire (NS)
- No Push Knob or Extra Switch Option
- No Weight Relief
- No 21:1 Tuner Ratio
- No Retainer Bar
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Jackson American Series Soloist SL3 has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference
This means that it will be more difficult to do bar chords on the Jackson American Series Soloist SL3, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Schecter PT Black Ops has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
The Jackson American Series Soloist SL3, on the other hand, has a D neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Jackson American Series Soloist SL3 is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
The Schecter PT Black Ops has XL Jumbo frets, which should be taller than the Jackson American Series Soloist SL3's Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
