Show Full Spec Comparison
| Schecter PT-7 MS Black Ops | Squier Affinity Series Telecaster | |
|---|---|---|
| General | ||
| Brand: | Schecter | Fender Squier |
| Year: | 2024 | 2019 |
| Configuration: | H | SS |
| Strings: | 7 | 6 |
| Made in: | Indonesia | China |
| Series: | Diamond | Affinity Series |
| Colors: | Black | White, Black, Green, Orange, Red, Yellow, Gray, 2-Color Sunburst |
| Left-Handed Version: | Yes | Yes |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Mahogany | Poplar |
| Bridge: | Hipshot 7 String Multiscale Fixed | 6-Saddle Hardtail with Cast Saddles |
| Neck | ||
| Neck Joint: | Set | Bolt-On |
| Tuners: | Schecter Locking | Standard Die-Cast |
| Fretboard: | Ebony | Maple |
| Neck Material: | Mahogany 3-pc w/ Carbon Fiber Reinforcement Rods | Maple |
| Decoration: | None | Black Dot |
| Scale Size: | 25.527" | 25.5" |
| Shape: | Thin "C" | Modern C |
| Thickness: | 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) | 1st Fret: - 12th Fret: |
| Frets: | 24 XL Jumbo Stainless Steel | 21 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 16" | 9.5" |
| Nut: | Black Tusq XL | Synthetic Bone |
| Nut Width: | 48mm (1.89'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | Fishman Fluence Open Core Modern-7 (Humbucker / Active) | Standard Single-Coil Tele (Single Coil / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Standard Single-Coil Tele (Single Coil / Passive) | |
| Switch: | 3 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 0 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Chrome |
Show Diagrams Comparison
Reasons to Get
Schecter PT-7 MS Black Ops over Squier Affinity Series Telecaster
Reasons to Get
Fender Squier Affinity Series Telecaster over Schecter PT-7 MS Black Ops
Other Key Differences
Schecter PT-7 MS Black Ops vs Squier Affinity Series Telecaster
Shared Features
Schecter PT-7 MS Black Ops vs Squier Affinity Series Telecaster
Common Strengths
- High-Quality Nut
Common Weaknesses
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter PT-7 MS Black Ops favors large hands more than the Fender Squier Affinity Series Telecaster.
Schecter PT-7 MS Black Ops:
Fender Squier Affinity Series Telecaster:
Beginner Friendliness
The Fender Squier Affinity Series Telecaster meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter PT-7 MS Black Ops meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter PT-7 MS Black Ops- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Fender Squier Affinity Series Telecaster- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Schecter PT-7 MS Black Ops
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Fender Squier Affinity Series Telecaster
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Poplar is a cheaper and heavier alternative to Alder wood. It terms of tone, it emphasizes the low-end and has cutting mids. It's relatively soft compared to most body woods. Find out more about Poplar.
Winner: Schecter PT-7 MS Black Ops.
Pickup Configuration
The Schecter PT-7 MS Black Ops has an H configuration while the Fender Squier Affinity Series Telecaster has SS pickups.
A single H pickup gives you the advantage of having a little longer sustain (all other things being equal) because there will be less magnetic fields from other pickups affecting the strings' vibration. However, they also give you the least versatility because you won't have other pickups at different distances from the bridge to create different tones. A single humbucking pickup is used for noiseless high output, which is used mainly for Hard Rock genres.
On the other hand, SS is the classic Telecaster configuration. It's used mainly for playing clean or with low-gain distortion, and it's very popular for the country genre because of their brightness. It doesn't give you as much versatility as a Strat SSS configuration, but you might like the cleaner look of a guitar body with fewer pickups.
Pickups Quality
The Schecter PT-7 MS Black Ops has pickups from a more specialized brand than the Fender Squier Affinity Series Telecaster. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Heavy Metal and similar genres.
The Schecter PT-7 MS Black Ops's pickups are Active while the Fender Squier Affinity Series Telecaster's are Passive.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Schecter PT-7 MS Black Ops.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Squier Affinity Series Telecaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter PT-7 MS Black Ops compares to the Fender Squier Affinity Series Telecaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter PT-7 MS Black Ops is built in Indonesia while the Fender Squier Affinity Series Telecaster is made in China.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Winner: Schecter PT-7 MS Black Ops
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter PT-7 MS Black Ops has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Fender Squier Affinity Series Telecaster comes with a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter PT-7 MS Black Ops is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter PT-7 MS Black Ops.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Schecter PT-7 MS Black Ops has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Schecter PT-7 MS Black Ops.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Schecter PT-7 MS Black Ops has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Fender Squier Affinity Series Telecaster comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Fender Squier Affinity Series Telecaster.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter PT-7 MS Black Ops
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Luminescent Inlay
- Made in Indonesia
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Squier Affinity Series Telecaster
- Synthetic Bone Nut
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Expensive Woods
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Schecter PT-7 MS Black Ops has the wider nut with 48mm (1.89'') vs 42mm (1.654''). This is a 6mm (0.236'') difference
This means that it will be more difficult to do bar chords on the Schecter PT-7 MS Black Ops, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Schecter PT-7 MS Black Ops has the longest scale: 25.527". The Fender Squier Affinity Series Telecaster is only 25.5" long. This is a 0.027000000000001'' (0.7mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter PT-7 MS Black Ops and the Fender Squier Affinity Series Telecaster have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Squier Affinity Series Telecaster's fingerboard radius is smaller, which means it's more curved than the Schecter PT-7 MS Black Ops's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter PT-7 MS Black Ops.
Fret Size
The Schecter PT-7 MS Black Ops has XL Jumbo frets, which should be taller than the Fender Squier Affinity Series Telecaster's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
