Swap
Swap
Schecter Orleans Stage-7 Acoustic
Fender FA-125CE Dreadnought
VS
Playability
73
Sound
85
Build
75
Value
83
Score
78
FIND IT ON:
Sweetwater logoMusician's Friend logo
Playability
72
Sound
80
Build
65
Value
87
Score
72
FIND IT ON:
Musician's Friend logoFender logoSweetwater logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Schecter Orleans Stage-7 Acoustic vs Fender FA-125CE Dreadnought Specs Comparison
Schecter Orleans Stage-7 Acoustic Fender FA-125CE Dreadnought
General
Brand: Schecter Fender
Year: 2020 2018
Strings: 7 6
Made in: China China
Series: Acoustic Fender Alternative
Colors: Black Natural
Left-Handed Version: No No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Spruce Laminated Spruce
Sides Material: Flame Maple Basswood
Back Material: Flame Maple Basswood
Bridge: Rosewood with Bone Saddle & Graph Tech TUSQ Pins Laminated Hardwood
Neck
Neck Joint: Set Set
Tuners: Grover Rotomatic 18:1 Die-Cast Sealed
Fretboard: Rosewood Walnut
Neck Material: Maple Nato
Decoration: Abalone Dots White Dot
Scale Size: 25.5" 25.3"
Shape: Acoustic Thin "C" Acoustic C Shape
Thickness: 1st Fret: 0.787'' (20mm) - 12th Fret: 0.866'' (22mm) 1st Fret: - 12th Fret:
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 16" 11.81"
Nut: Bone Plastic
Nut Width: 48mm (1.89'') 43mm (1.693'')
Electronics
Pickups: Fishman Sonicore Piezo (Preamp / Active) Fender FE-A2 Preamp (Preamp / Active)
Hardware
Strap Lock: No No
Hardware Color: Chrome Chrome

Reasons to Get
Schecter Orleans Stage-7 Acoustic over Fender FA-125CE Dreadnought

Release Year
2020 vs 2018
From a more recent year
Nut Material
Bone vs Plastic
Good quality nut with rich tone
Top Wood
Solid vs Laminated
Helps with richer tones and louder volume
Strings
7 vs 6
Allows you to play lower notes
Volume Knobs
1 vs 0
More volume control
Nut Width
1.89'' (48mm) vs 1.693'' (43mm)
Less likely to mute strings by accident and more space for fingerstyle
Body Shape
Grand Auditorium vs Dreadnought
Wide and narrow body with a balanced tone
Scale Length
25.5'' (647.7mm) vs 25.3'' (642.6mm)
Lower action and brighter natural tone
Fretboard Radius
16'' (406.4mm) vs 11.81'' (300mm)
Flatter fretboard makes it easier to play single notes and bend

Reasons to Get
Fender FA-125CE Dreadnought over Schecter Orleans Stage-7 Acoustic

Strings
6 vs 7
Narrower neck and fewer strings to change
Nut Width
1.693'' (43mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Body Shape
Dreadnought vs Grand Auditorium
Prominent low-end tones in a large body
Scale Length
25.3'' (642.6mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
11.81'' (300mm) vs 16'' (406.4mm)
Easier to play chords without muting strings
Value Score
87 vs 83
Better price/quality relationship

Other Key Differences
Schecter Orleans Stage-7 Acoustic vs Fender FA-125CE Dreadnought

Back Material
Flame Maple vs Basswood
Different Back Material
Sides Material
Flame Maple vs Basswood
Different Sides Material
Saddle Material
Ivory Tusq vs Plastic
Different Saddle Material
Bridge Material
Rosewood with Bone Saddle & Graph Tech TUSQ Pins vs Laminated Hardwood
Different Bridge Material
Neck Wood
Maple vs Nato
Different Neck Wood
Fretboard Wood
Rosewood vs Walnut
Different Fretboard Wood
Headstock
3-4 vs 3-3
Different Headstock
Nut Material
Bone vs Plastic
Different Nut Material

Shared Features
Schecter Orleans Stage-7 Acoustic vs Fender FA-125CE Dreadnought

Body Wood
Spruce
Same Body Wood
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Top Pickup Brand

Common Weaknesses

  • Solid Side Wood
  • Solid Back Wood
  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Schecter Orleans Stage-7 Acoustic Prices

    SET PRICE ALERT
    SET PRICE ALERT

    These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

    Hand Size Comfortability

    And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter Orleans Stage-7 Acoustic favors large hands more than the Fender FA-125CE Dreadnought.

    Schecter Orleans Stage-7 Acoustic:
    Big Hands
    Small Hands
    Fender FA-125CE Dreadnought:
    Big Hands
    Small Hands

    Beginner Friendliness

    Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

    New Player Friendliness

    Schecter Orleans Stage-7 Acoustic
    • Easy-to-use bridge
    • Tall frets
    • Comfortable neck
    • Comfortable shape
    • Comfortable fretboard
    • Narrow nut
    • Short scale
    • Soft Strings
    • Locking tuners

    New Player Friendliness

    Fender FA-125CE Dreadnought
    • Easy-to-use bridge
    • Tall frets
    • Comfortable neck
    • Comfortable shape
    • Comfortable fretboard
    • Narrow nut
    • Short scale
    • Soft Strings
    • Locking tuners

    Sound Quality Comparison

    The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

    Woods Used in Both

    Spruce wood pattern used for guitar building
    Spruce

    Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

    Woods Used in the Schecter Orleans Stage-7 Acoustic

    Maple wood pattern used for guitar building
    Maple
    Rosewood wood pattern used for guitar building
    Rosewood
    Flame Maple wood pattern used for guitar building
    Flame Maple

    Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

    Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

    This wood has beautiful patterns only found in specific types of maple.

    Woods Used in the Fender FA-125CE Dreadnought

    Nato wood pattern used for guitar building
    Nato
    Walnut wood pattern used for guitar building
    Walnut
    Basswood wood pattern used for guitar building
    Basswood

    Nato a hard and dense wood similar to Mahogany, but cheaper and not quite as hard. Tone-wise, it's also similar, but it doesn't have quite the same attack as Mahogany.

    It's a hard wood with a chocolate color that is often used to give an elegant finish. Since it's quite expensive and rare, it's mostly used for guitar tops. Find out more about Walnut.

    Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

    Winner: Schecter Orleans Stage-7 Acoustic.

    Electronics

    Both come with electronics that allow you connect them to an amplifier or interface for recording.

    Winner:Tie.

    Final Sound Quality Scores

    Schecter Orleans Stage-7 Acoustic
    Sustain 85
    Versatility 85
    Tuning Stability 70
    Sound 85
    Fender FA-125CE Dreadnought
    Sustain 70
    Versatility 85
    Tuning Stability 65
    Sound 80

    Build Quality Comparison

    When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Orleans Stage-7 Acoustic compares to the Fender FA-125CE Dreadnought.

    Country of Origin

    The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.

    China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

    Winner: Tie

    Nut Material

    If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

    The Schecter Orleans Stage-7 Acoustic has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

    On the other hand, the Fender FA-125CE Dreadnought comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

    Winner: Schecter Orleans Stage-7 Acoustic.

    Fret Material

    Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

    Unfortunately, none of them come with stainless steel frets.

    Winner: Tie.

    Tuners

    Both come with regular tuners. The Schecter Orleans Stage-7 Acoustic's are Grover Rotomatic 18:1 while the Fender FA-125CE Dreadnought's are Die-Cast Sealed

    Winner: Tie.

    Here is the list of features that were considered when choosing the winner in the Features subcategory:

    Strengths & Weaknesses
    Schecter Orleans Stage-7 Acoustic
    • Expensive Wood
    • Bone Nut
    • Top Brand Pickups
    • Electronics
    • Ivory Tusq Saddle
    • Solid Top Wood
    • Cheap Fret Wire (NS)
    • No Locking Tuners
    • Made in China
    • Laminated Side Wood
    • Laminated Back Wood
    • No Compound Radius Fretboard
    • No 21:1 Tuner Ratio
    • No Strap Lock
    Strengths & Weaknesses
    Fender FA-125CE Dreadnought
    • Top Brand Pickups
    • Electronics
    • Cheap Fret Wire (NS)
    • No Locking Tuners
    • Made in China
    • No Expensive Woods
    • No High-Quality Nut
    • Low-Quality Material Saddle
    • Laminated Top Wood
    • Laminated Side Wood
    • Laminated Back Wood
    • No Compound Radius Fretboard
    • No 21:1 Tuner Ratio
    • No Strap Lock

    Final Build Quality Scores

    Schecter Orleans Stage-7 Acoustic
    Quality of materials 81
    Features 85
    Quality Control 60
    Build Quality 75
    Fender FA-125CE Dreadnought
    Quality of materials 56
    Features 85
    Quality Control 55
    Build Quality 65

    Playability Comparison

    Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

    Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

    Nut Width

    Schecter Orleans Stage-7 Acoustic Nut Width
    Schecter Orleans Stage-7 Acoustic Nut Width
    Fender FA-125CE Dreadnought Nut Width
    Fender FA-125CE Dreadnought Nut Width

    The nut width will affect the separation between strings at the nut. In this comparison, the Schecter Orleans Stage-7 Acoustic has the wider nut with 48mm (1.89'') vs 43mm (1.693''). This is a 5mm (0.197'') difference

    This means that it will be more difficult to do bar chords on the Schecter Orleans Stage-7 Acoustic, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

    Scale Length

    Schecter Orleans Stage-7 Acoustic's Scale Length
    Schecter Orleans Stage-7 Acoustic's Scale Length
    Fender FA-125CE Dreadnought's Scale Length
    Fender FA-125CE Dreadnought's Scale Length

    The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

    The Schecter Orleans Stage-7 Acoustic has the longest scale: 25.5". The Fender FA-125CE Dreadnought is only 25.3" long. This is a 0.2'' (5.1mm) scale length difference.

    This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

    This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

    Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

    Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

    Neck Profile

    Schecter Orleans Stage-7 Acoustic Neck Profile
    Schecter Orleans Stage-7 Acoustic's neck profile
    Fender FA-125CE Dreadnought Neck Profile
    Fender FA-125CE Dreadnought's neck profile

    No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

    Both the Schecter Orleans Stage-7 Acoustic and the Fender FA-125CE Dreadnought have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

    Fretboard Radius

    Schecter Orleans Stage-7 Acoustic Fingerboard Radius
    Schecter Orleans Stage-7 Acoustic's Fingerboard radius
    Fender FA-125CE Dreadnought Fingerboard Radius
    Fender FA-125CE Dreadnought's Fingerboard radius

    Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

    In this case, the Fender FA-125CE Dreadnought's fingerboard radius is smaller, which means it's more curved than the Schecter Orleans Stage-7 Acoustic's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Orleans Stage-7 Acoustic.

    Fret Size

    Schecter Orleans Stage-7 Acoustic and Fender FA-125CE Dreadnought Frets Size
    Both have a similar Medium fret size

    Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

    Final Playability Scores

    Schecter Orleans Stage-7 Acoustic
    Bending & Vibrato Ease 75
    Chord Playability 65
    Solo Playability 80
    Playability 73
    Fender FA-125CE Dreadnought
    Bending & Vibrato Ease 70
    Chord Playability 70
    Solo Playability 75
    Playability 72