Swap
Swap
Schecter Hellraiser Hybrid C-1
Schecter Reaper-6
VS
Playability
78
Sound
77
Build
67
Value
74
Score
74
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Playability
78
Sound
69
Build
60
Value
74
Score
69
FIND IT ON:
Sweetwater logoAmazon logo
Add more to comparison

Schecter Hellraiser Hybrid C-1 vs Reaper-6

Reasons to Get
Schecter Hellraiser Hybrid C-1 over Reaper-6

Compound Radius
12" to 16" vs 14"
Balanced playability for chords and single-notes
Pickups Brand
EMG vs None
Pickups from a renown brand
Volume Knobs
2 vs 1
More volume control
Locking Tuners
Yes vs None
Easier to change strings
Pickups Power
Active vs Passive
More output

Reasons to Get
Schecter Reaper-6 over Hellraiser Hybrid C-1

Release Year
2019 vs 2015
From a more recent year
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Avg. Weight
7.375lbs (3.3kgs) vs 7.6lbs (3.4kgs)
Tends to be lighter
Pickups Power
Passive vs Active
Cleaner sound and no battery needed

Other Key Differences
Schecter Hellraiser Hybrid C-1 vs Reaper-6

Bridge Pickup
EMG 57 vs Schecter Diamond Decimator
Different Bridge Pickup
Neck Pickup
EMG 66 vs Schecter Diamond Decimator
Different Neck Pickup
Body Wood
Mahogany vs Ash
Different Body Wood

Shared Features
Schecter Hellraiser Hybrid C-1 vs Reaper-6

Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
Black Tusq XL
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Neck Thickness at 1st Fret
0.748'' (19mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.787'' (20mm)
Same neck comfortability
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Decorative Top
Quilted Maple vs Burl
Finished with beautiful natural wood patterns
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Set
Neck is glued to the body
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter Hellraiser Hybrid C-1 is probably the better product overall with its final score of 74 compared to the Schecter Reaper-6's 69 score, although not by a lot.

The Schecter Hellraiser Hybrid C-1 wins when it comes to sound, build quality. On the other hand, the Schecter Reaper-6 has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter Hellraiser Hybrid C-1 is the better choice.

The Schecter Hellraiser Hybrid C-1 meets 7 out of our 8 criteria items for beginner friendliness, while the Schecter Reaper-6 meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Schecter Hellraiser Hybrid C-1
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale

New Player Friendliness

Schecter Reaper-6
  • Comfortable shape
  • Easy-to-use bridge
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Schecter Hellraiser Hybrid C-1 Overview

  • From Schecter's 2015 Hellraiser Hybrid series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Quilted Maple top
  • Mahogany body
  • Maple 3-pc neck
  • Ebony fretboard
  • Bridge pickup: EMG 57 (Humbucker/Active)
  • Neck pickup: EMG 66 (Humbucker/Active)
  • 2 volume and 1 tone Dome knobs
  • 3-way Switch
  • TonePros T3BT TOM w/ String Thru Body bridge
  • Ultra Thin C Set neck
  • 24 XL Jumbo frets
  • Schecter Locking tuners
  • Weight between 7.45lbs (3.4kgs) and 7.75lbs (3.5kgs)
  • Compare Specs >

Schecter Reaper-6 Overview

  • From Schecter's 2019 Reaper series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 14" Fretboard Radius
  • Burl top
  • Swamp Ash body
  • Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Schecter Diamond Decimator (Humbucker/Passive)
  • Neck pickup: Schecter Diamond Decimator (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Schecter Custom Hardtail w/ String Thru Body bridge
  • Ultra Thin C Set neck
  • 24 XL Jumbo frets
  • Schecter tuners
  • Weight between 7.05lbs (3.2kgs) and 7.7lbs (3.5kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Schecter Hellraiser Hybrid C-1

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Schecter Reaper-6

Ash wood pattern used for guitar building
Ash

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

The Schecter Hellraiser Hybrid C-1 has pickups from a more specialized brand than the Schecter Reaper-6. Its pickups should simply give you a better, fuller sound, although it all depends on what type of music you're going to play. We recommend these pickups for Hard Rock and similar genres.

You can purchase similar pickups to the Schecter Hellraiser Hybrid C-1's and use them on any guitar:

The Schecter Hellraiser Hybrid C-1's pickups are Active while the Schecter Reaper-6's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Schecter Hellraiser Hybrid C-1.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Only the Schecter Reaper-6 comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Schecter Hellraiser Hybrid C-1 pickups switch and push knobs diagram
Schecter Hellraiser Hybrid C-1's switch options
Schecter Reaper-6 pickups switch and push knobs diagram
Schecter Reaper-6's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Reaper-6.

Final Sound Quality Scores

Schecter Hellraiser Hybrid C-1
Pickups 85
Sustain 90
Versatility 51
Tuning Stability 80
Sound 77
Schecter Reaper-6
Pickups 55
Sustain 85
Versatility 64
Tuning Stability 70
Sound 69

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Hellraiser Hybrid C-1 compares to the Schecter Reaper-6.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Schecter Hellraiser Hybrid C-1 is built in South Korea while the Schecter Reaper-6 is made in Indonesia.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Black Tusq XL nuts. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Schecter Hellraiser Hybrid C-1 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Schecter Hellraiser Hybrid C-1.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter Hellraiser Hybrid C-1
  • Locking Tuners
  • Expensive Wood
  • Black Tusq XL Nut
  • Top Brand Pickups
  • Compound Radius Fretboard
  • Cheap Fret Wire (NS)
  • Made in South Korea
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Reaper-6
  • Expensive Wood
  • Black Tusq XL Nut
  • Coil Split Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Indonesia
  • No Top Brand Pickups
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter Hellraiser Hybrid C-1
Quality of materials 55
Features 70
Quality Control 75
Build Quality 67
Schecter Reaper-6
Quality of materials 55
Features 55
Quality Control 70
Build Quality 60

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter Hellraiser Hybrid C-1 Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Schecter Hellraiser Hybrid C-1 and Schecter Reaper-6's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter Hellraiser Hybrid C-1 Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Schecter Hellraiser Hybrid C-1 and the Schecter Reaper-6 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Schecter Hellraiser Hybrid C-1 Fretboard Compound Radius
Schecter Hellraiser Hybrid C-1's Compound Fretboard Radius
Schecter Reaper-6 Fingerboard Radius
Schecter Reaper-6's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter Hellraiser Hybrid C-1 is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Schecter Hellraiser Hybrid C-1:
Big Hands
Small Hands
Schecter Reaper-6:
Big Hands
Small Hands

Fret Size

Schecter Hellraiser Hybrid C-1 and Schecter Reaper-6 Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

Schecter Hellraiser Hybrid C-1
Bending & Vibrato Ease 75
Chord Playability 70
Solo Playability 90
Playability 78
Schecter Reaper-6
Bending & Vibrato Ease 85
Chord Playability 60
Solo Playability 90
Playability 78

Specs Side-by-Side

Schecter Hellraiser Hybrid C-1 vs Reaper-6
General Schecter Hellraiser Hybrid C-1 Reaper-6
Brand: Schecter Schecter
Year: 2015 2019
Configuration: HH HH
Strings: 6 6
Made in: South Korea Indonesia
Series: Hellraiser Hybrid Reaper
Colors: Black, Purple Black Burst, Blue Burst, Orange Burst
Left-Handed Version: Yes Yes
Body
Type: Solid Body Solid Body
Body Material: Mahogany Swamp Ash
Bridge: TonePros T3BT TOM w/ String Thru Body Schecter Custom Hardtail w/ String Thru Body
Neck
Neck Joint: Set Set
Tuners: Schecter Locking Schecter
Fretboard: Ebony Ebony
Neck Material: Maple 3-pc Maple/Walnut Multi-ply w/ Carbon Fiber Reinforcement Rods
Decoration: MOP Offset/Reverse Dots w/Gothic Cross at 12th Fret Pearloid Offset/Reverse Dots
Scale Size: 25.5" 25.5"
Shape: Ultra Thin C Ultra Thin C
Thickness: 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm) 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm)
Frets: 24 XL Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 14"
Nut: Black Tusq XL Black Tusq XL
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: EMG 57 (Humbucker / Active) Schecter Diamond Decimator (Humbucker / Passive)
Middle Pickup:
Neck Pickup: EMG 66 (Humbucker / Active) Schecter Diamond Decimator (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: None Coil Split
Volume Controls: 2 1
Tone Controls: 1 1