Swap
Swap
Schecter Hellraiser C-1 FR
Schecter Damien Platinum-6 FR S
VS
Playability
77
Sound
82
Build
67
Value
75
Score
75
FIND IT ON:
Amazon logoSweetwater logo
Playability
77
Sound
84
Build
64
Value
80
Score
75
FIND IT ON:
Sweetwater logoAmazon logo
Add more to comparison

Schecter Hellraiser C-1 FR vs Damien Platinum-6 FR S

Reasons to Get
Schecter Hellraiser C-1 FR over Damien Platinum-6 FR S

Decorative Top
Quilted Maple vs None
Finished with beautiful natural wood patterns
Pickup Mods
Coil Split vs Sustainer
Splits humbuckers into single coil pickups
Volume Knobs
2 vs 1
More volume control
Pickups Power
Active vs Passive
More output

Reasons to Get
Schecter Damien Platinum-6 FR S over Hellraiser C-1 FR

Release Year
2015 vs 2006
From a more recent year
Pickup Mods
Sustainer vs Coil Split
Infinite sustain when activated
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
80 vs 75
Better price/quality relationship

Other Key Differences
Schecter Hellraiser C-1 FR vs Damien Platinum-6 FR S

Bridge Pickup
EMG 81TW vs EMG 81
Different Bridge Pickup
Neck Pickup
EMG 89R vs Sustainiac
Different Neck Pickup
Neck Wood
Mahogany vs Maple
Different Neck Wood

Shared Features
Schecter Hellraiser C-1 FR vs Damien Platinum-6 FR S

Body Wood
Mahogany
Same Body Wood
Fretboard Wood
Rosewood
Same Fretboard Wood
Headstock
3-3
Same Headstock
Nut Material
Locking
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Neck Thickness at 1st Fret
0.79'' (20.1mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.87'' (22.1mm)
Same neck comfortability
Nut Width
1.625'' (41.3mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Floyd Rose
Allows intense vibratos and techniques like Dive Bombs
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Fretboard Radius
14'' (355.6mm)
Same fretboard comfortability
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Set
Neck is glued to the body
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Retainer Bar
  • High-Quality Nut
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 75 out of 100, which makes them similar in terms of quality.

The Schecter Damien Platinum-6 FR S wins when it comes to sound, value for the money. On the other hand, the Schecter Hellraiser C-1 FR has the upper hand when it comes to build quality.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 4 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Schecter Hellraiser C-1 FR
  • Comfortable shape
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

New Player Friendliness

Schecter Damien Platinum-6 FR S
  • Comfortable shape
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Schecter Hellraiser C-1 FR Overview

  • From Schecter's 2006 Hellraiser series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 14" Fretboard Radius
  • Quilted Maple top
  • Mahogany body
  • Mahogany 3-pc neck
  • Rosewood fretboard
  • Bridge pickup: EMG 81TW (Humbucker/Active)
  • Neck pickup: EMG 89R (Humbucker/Active)
  • 2 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose 1000 Series bridge
  • Thin C Set neck
  • 24 XL Jumbo frets
  • Grover tuners
  • Compare Specs >

Schecter Damien Platinum-6 FR S Overview

  • From Schecter's 2015 Damien series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 14" Fretboard Radius
  • Mahogany body
  • Maple 3-pc neck
  • Rosewood fretboard
  • Bridge pickup: EMG 81 (Humbucker/Active)
  • Neck pickup: Sustainiac (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose Special bridge
  • Thin C Set neck
  • 24 XL Jumbo frets
  • Grover tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Schecter Damien Platinum-6 FR S

Maple wood pattern used for guitar building
Maple

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

You can purchase similar pickups to the Schecter Hellraiser C-1 FR's and use them on any guitar:

We found the same or similar pickups to the Schecter Damien Platinum-6 FR S's online:

The Schecter Hellraiser C-1 FR's pickups are Active while the Schecter Damien Platinum-6 FR S's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both give you different pickup mod options.

The Schecter Hellraiser C-1 FR offers Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

On the other hand, the Schecter Damien Platinum-6 FR S comes with the following: Sustainer.

The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.

Schecter Hellraiser C-1 FR pickups switch and push knobs diagram
Schecter Hellraiser C-1 FR's switch options
Schecter Damien Platinum-6 FR S pickups switch and push knobs diagram
Schecter Damien Platinum-6 FR S's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Hellraiser C-1 FR.

Final Sound Quality Scores

Schecter Hellraiser C-1 FR
Pickups 85
Sustain 85
Versatility 71
Tuning Stability 85
Sound 82
Schecter Damien Platinum-6 FR S
Pickups 85
Sustain 100
Versatility 64
Tuning Stability 85
Sound 84

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Hellraiser C-1 FR compares to the Schecter Damien Platinum-6 FR S.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in South Korea.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Locking nuts. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Both models come with a retainer bar, which is helpful when changing the strings on a double-locking tremolo. Without it, the strings would change pitch once you lock down the nut, so you'd have to make more micro-adjustments at the bridge to tune it correctly

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. Both come with Grover.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter Hellraiser C-1 FR
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Damien Platinum-6 FR S
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Sustainer Pickups
  • Tremolo
  • Retainer Bar
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter Hellraiser C-1 FR
Quality of materials 55
Features 70
Quality Control 75
Build Quality 67
Schecter Damien Platinum-6 FR S
Quality of materials 51
Features 70
Quality Control 70
Build Quality 64

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter Hellraiser C-1 FR Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 41.3mm (1.625'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Schecter Hellraiser C-1 FR and Schecter Damien Platinum-6 FR S's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter Hellraiser C-1 FR Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Schecter Hellraiser C-1 FR and the Schecter Damien Platinum-6 FR S have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Schecter Hellraiser C-1 FR Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Schecter Hellraiser C-1 FR and the Schecter Damien Platinum-6 FR S have the same fretboard radius of 14". This radius y closer to the 12'' that most Les Paul guitars have, but a bit flatter. It'll make it easier to play single notes than chords, but it's still comfortable for playing chords without muting strings.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Schecter Hellraiser C-1 FR:
Big Hands
Small Hands
Schecter Damien Platinum-6 FR S:
Big Hands
Small Hands

Fret Size

Schecter Hellraiser C-1 FR and Schecter Damien Platinum-6 FR S Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

Schecter Hellraiser C-1 FR
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77
Schecter Damien Platinum-6 FR S
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 90
Playability 77

Specs Side-by-Side

Schecter Hellraiser C-1 FR vs Damien Platinum-6 FR S
General Schecter Hellraiser C-1 FR Damien Platinum-6 FR S
Brand: Schecter Schecter
Year: 2006 2015
Configuration: HH HH
Strings: 6 6
Made in: South Korea South Korea
Series: Hellraiser Damien
Colors: White, Black, Red, Purple Black
Left-Handed Version: Yes Yes
Body
Type: Solid Body Solid Body
Body Material: Mahogany Mahogany
Bridge: Floyd Rose 1000 Series Floyd Rose Special
Neck
Neck Joint: Set Set
Tuners: Grover Grover
Fretboard: Rosewood Rosewood
Neck Material: Mahogany 3-pc Maple 3-pc
Decoration: Abalone Gothic Crosses Platinum Bats
Scale Size: 25.5" 25.5"
Shape: Thin C Thin C
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 XL Jumbo Nickel Silver 24 XL Jumbo Nickel Silver
Fretboard Radius: 14" 14"
Nut: Locking Locking
Nut Width: 41.3mm (1.625'') 41.3mm (1.625'')
Electronics
Bridge Pickup: EMG 81TW (Humbucker / Active) EMG 81 (Humbucker / Active)
Middle Pickup:
Neck Pickup: EMG 89R (Humbucker / Active) Sustainiac (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Coil Split Sustainer
Volume Controls: 2 1
Tone Controls: 1 1