Swap
Swap
Schecter E-1 Custom Special Edition
Schecter Jack Fowler Traditional
VS
Playability
80
Sound
79
Build
68
Value
81
Score
76
FIND IT ON:
Sweetwater logo
Playability
73
Sound
80
Build
67
Value
73
Score
73
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add more to comparison

Schecter E-1 Custom Special Edition vs Jack Fowler Traditional

Reasons to Get
Schecter E-1 Custom Special Edition over Jack Fowler Traditional

Decorative Top
Quilted Maple vs None
Finished with beautiful natural wood patterns
Compound Radius
12" to 16" vs 14"
Balanced playability for chords and single-notes
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Scale Length
24.75'' (628.7mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Value Score
81 vs 73
Better price/quality relationship

Reasons to Get
Schecter Jack Fowler Traditional over E-1 Custom Special Edition

Release Year
2021 vs 2020
From a more recent year
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Scale Length
25.5'' (647.7mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone

Other Key Differences
Schecter E-1 Custom Special Edition vs Jack Fowler Traditional

Bridge Pickup
Schecter USA Sunset Strip vs Schecter USA Pasadena Plus
Different Bridge Pickup
Body Wood
Mahogany vs Alder
Different Body Wood
Neck Wood
Mahogany vs Roasted Maple
Different Neck Wood
Headstock
3-3 vs 6
Different Headstock

Shared Features
Schecter E-1 Custom Special Edition vs Jack Fowler Traditional

Neck Pickup
Schecter USA Pasadena
Same Neck Pickup
Fretboard Wood
Ebony
Same Fretboard Wood
Nut Material
Ivory Tusq
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Number of Frets
22
Same maximum octave
Neck Thickness at 1st Fret
0.79'' (20.1mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.87'' (22.1mm)
Same neck comfortability
Nut Width
1.654'' (42mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Nut
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Schecter E-1 Custom Special Edition Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter E-1 Custom Special Edition is probably the better product overall with its final score of 76 compared to the Schecter Jack Fowler Traditional's 73 score, although not by a lot.

The Schecter E-1 Custom Special Edition wins when it comes to playability, build quality, value for the money. On the other hand, the Schecter Jack Fowler Traditional has the upper hand when it comes to sound.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter E-1 Custom Special Edition is the better choice.

The Schecter E-1 Custom Special Edition meets 7 out of our 8 criteria items for beginner friendliness, while the Schecter Jack Fowler Traditional meets only 6. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Schecter E-1 Custom Special Edition
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale

New Player Friendliness

Schecter Jack Fowler Traditional
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Schecter E-1 Custom Special Edition Overview

  • From Schecter's 2020 Custom series
  • Made in South Korea
  • 6 strings
  • 24.75"'' scale
  • 12" to 16" Fretboard Radius
  • Quilted Maple top
  • Mahogany body
  • Mahogany 3-pc neck
  • Ebony fretboard
  • Bridge pickup: Schecter USA Sunset Strip (Humbucker/Passive)
  • Neck pickup: Schecter USA Pasadena (Humbucker/Passive)
  • 1 volume and 1 tone Speed knobs
  • 3-way Switch
  • TonePros T3BT TOM & T1Z Tailpiece bridge
  • Thin C Set neck
  • 22 XL Jumbo frets
  • Schecter Locking tuners
  • Compare Specs >

Schecter Jack Fowler Traditional Overview

  • From Schecter's 2021 Artist series
  • Jack Fowler Signature
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 14" Fretboard Radius
  • Alder body
  • Roasted Maple neck
  • Ebony fretboard
  • Bridge pickup: Schecter USA Pasadena Plus (Humbucker/Passive)
  • Neck pickup: Schecter USA Pasadena (Humbucker/Passive)
  • 1 volume and 1 tone Bell knobs
  • 3-way Switch
  • Diamond Vintage Tremolo bridge
  • Thin C Bolt-On neck
  • 22 XL Jumbo frets
  • Schecter Locking tuners
  • Weight between 7.85lbs (3.6kgs) and 7.95lbs (3.6kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Ebony wood pattern used for guitar building
Ebony

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Schecter E-1 Custom Special Edition

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Schecter Jack Fowler Traditional

Roasted Maple wood pattern used for guitar building
Roasted Maple
Alder wood pattern used for guitar building
Alder

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Schecter E-1 Custom Special Edition.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both offer you the same type of pickup mod: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

They both share the following switching options:

Schecter E-1 Custom Special Edition and Schecter Jack Fowler Traditional pickups switch and push knobs diagram
Schecter E-1 Custom Special Edition and Schecter Jack Fowler Traditional's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Jack Fowler Traditional.

Final Sound Quality Scores

Schecter E-1 Custom Special Edition
Pickups 90
Sustain 85
Versatility 59
Tuning Stability 80
Sound 79
Schecter Jack Fowler Traditional
Pickups 90
Sustain 80
Versatility 74
Tuning Stability 75
Sound 80

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter E-1 Custom Special Edition compares to the Schecter Jack Fowler Traditional.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Schecter E-1 Custom Special Edition is built in South Korea while the Schecter Jack Fowler Traditional is made in Indonesia.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Ivory Tusq nuts. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Schecter E-1 Custom Special Edition's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Schecter Jack Fowler Traditional's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Schecter E-1 Custom Special Edition has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

On the other hand, the Schecter Jack Fowler Traditional comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Schecter Jack Fowler Traditional.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter E-1 Custom Special Edition
  • Locking Tuners
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Compound Radius Fretboard
  • Cheap Fret Wire (NS)
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter Jack Fowler Traditional
  • Locking Tuners
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Tremolo
  • Cheap Fret Wire (NS)
  • Made in Indonesia
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter E-1 Custom Special Edition
Quality of materials 60
Features 75
Quality Control 70
Build Quality 68
Schecter Jack Fowler Traditional
Quality of materials 56
Features 70
Quality Control 75
Build Quality 67

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter E-1 Custom Special Edition Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Schecter E-1 Custom Special Edition's Scale Length
Schecter E-1 Custom Special Edition's Scale Length
Schecter Jack Fowler Traditional's Scale Length
Schecter Jack Fowler Traditional's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Schecter Jack Fowler Traditional has the longest scale: 25.5". The Schecter E-1 Custom Special Edition is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter E-1 Custom Special Edition Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Schecter E-1 Custom Special Edition and the Schecter Jack Fowler Traditional have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Schecter E-1 Custom Special Edition Fretboard Compound Radius
Schecter E-1 Custom Special Edition's Compound Fretboard Radius
Schecter Jack Fowler Traditional Fingerboard Radius
Schecter Jack Fowler Traditional's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter E-1 Custom Special Edition is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Schecter E-1 Custom Special Edition:
Big Hands
Small Hands
Schecter Jack Fowler Traditional:
Big Hands
Small Hands

Fret Size

Schecter E-1 Custom Special Edition and Schecter Jack Fowler Traditional Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

Schecter E-1 Custom Special Edition
Bending & Vibrato Ease 85
Chord Playability 75
Solo Playability 80
Playability 80
Schecter Jack Fowler Traditional
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 80
Playability 73

Specs Side-by-Side

Schecter E-1 Custom Special Edition vs Jack Fowler Traditional
General Schecter E-1 Custom Special Edition Jack Fowler Traditional
Brand: Schecter Schecter
Year: 2020 2021
Configuration: HH HH
Strings: 6 6
Made in: South Korea Indonesia
Series: Custom Artist
Colors: Orange Burst White
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Mahogany Alder
Bridge: TonePros T3BT TOM & T1Z Tailpiece Diamond Vintage Tremolo
Neck
Neck Joint: Set Bolt-On
Tuners: Schecter Locking Schecter Locking
Fretboard: Ebony Ebony
Neck Material: Mahogany 3-pc Roasted Maple
Decoration: Mother of Pearl Blocks White Pearloid Dots
Scale Size: 24.75" 25.5"
Shape: Thin C Thin C
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 22 XL Jumbo Nickel Silver 22 XL Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 14"
Nut: Ivory Tusq Ivory Tusq
Nut Width: 42mm (1.654'') 42mm (1.654'')
Electronics
Bridge Pickup: Schecter USA Sunset Strip (Humbucker / Passive) Schecter USA Pasadena Plus (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Schecter USA Pasadena (Humbucker / Passive) Schecter USA Pasadena (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Speed Bell
Pickup Mods: Coil Split Coil Split
Volume Controls: 1 1
Tone Controls: 1 1