Show Full Spec Comparison
| Schecter Corsair 2020 | Fender Albert Hammond Jr Stratocaster | |
|---|---|---|
| General | ||
| Brand: | Schecter | Fender |
| Year: | 2021 | 2018 |
| Configuration: | HH | SSS |
| Strings: | 6 | 6 |
| Made in: | Indonesia | Mexico |
| Series: | Corsair | Artist |
| Colors: | Gold | White |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Semi-Hollow | Solid Body |
| Body Material: | Maple | Alder |
| Bridge: | Tremolo Roller Tune-O-Matic | 6-Saddle Vintage-Style Synchronized Tremolo Set Flat to Body |
| Neck | ||
| Neck Joint: | Set | Bolt-On |
| Tuners: | Grover Rotomatic 18:1 | Fender Vintage F Stamped |
| Fretboard: | Ebony | Rosewood |
| Neck Material: | Mahogany | Maple |
| Decoration: | Blocks | White Dot |
| Scale Size: | 24.75" | 25.5" |
| Shape: | Thin C | Modern C |
| Thickness: | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) | 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.87'' (22.1mm) |
| Frets: | 22 Medium Nickel Silver | 21 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 14" | 7.25" |
| Nut: | Ivory Tusq | Synthetic Bone |
| Nut Width: | 42mm (1.654'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | Schecter Diamond 78 (Humbucker / Passive) | Fender Custom Ceramic Single-Coil (Single Coil / Passive) |
| Middle Pickup: | Fender Custom Ceramic Single-Coil (Single Coil / Passive) | |
| Neck Pickup: | Schecter Diamond 78 (Humbucker / Passive) | Fender Custom Ceramic Single-Coil (Single Coil / Passive) |
| Switch: | 3 Way | 5 Way |
| Knobs: | Speed | Bell |
| Pickup Mods: | Coil Split | None |
| Volume Controls: | 2 | 1 |
| Tone Controls: | 2 | 2 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Chrome |
Show Diagrams Comparison
Reasons to Get
Schecter Corsair 2020 over Fender Albert Hammond Jr Stratocaster
Reasons to Get
Fender Albert Hammond Jr Stratocaster over Schecter Corsair 2020
Other Key Differences
Schecter Corsair 2020 vs Fender Albert Hammond Jr Stratocaster
Shared Features
Schecter Corsair 2020 vs Fender Albert Hammond Jr Stratocaster
Common Strengths
- High-Quality Nut
- Expensive Wood
Common Weaknesses
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender Albert Hammond Jr Stratocaster favors large hands more than the Schecter Corsair 2020. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Schecter Corsair 2020:
Fender Albert Hammond Jr Stratocaster:
Beginner Friendliness
The Fender Albert Hammond Jr Stratocaster meets 5 out of our 8 criteria items for beginner friendliness, while the Schecter Corsair 2020 meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter Corsair 2020- Comfortable shape
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
- Easy-to-use bridge
New Player Friendliness
Fender Albert Hammond Jr Stratocaster- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Narrow nut
- Comfortable neck
- Comfortable fretboard
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Schecter Corsair 2020
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Woods Used in the Fender Albert Hammond Jr Stratocaster
Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Winner: Schecter Corsair 2020.
Pickup Configuration
The Schecter Corsair 2020 has an HH configuration while the Fender Albert Hammond Jr Stratocaster has SSS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.
Pickups Quality
The Fender Albert Hammond Jr Stratocaster pickups from a more specialized brand than the Schecter Corsair 2020. Its pickups should give you a fuller, richer sound, although it all depends on what type of music you're going to play. We recommend these pickups for Funk and similar genres.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender Albert Hammond Jr Stratocaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender Albert Hammond Jr Stratocaster gives you 5 switch options while the Schecter Corsair 2020 gives you 3. This means that the Fender Albert Hammond Jr Stratocaster gives you more options to find the right pickup combination for the type of sound you want to achieve
Only the Schecter Corsair 2020 comes with some kind of pickup modification: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender Albert Hammond Jr Stratocaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Corsair 2020 compares to the Fender Albert Hammond Jr Stratocaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Schecter Corsair 2020 is built in Indonesia while the Fender Albert Hammond Jr Stratocaster is made in Mexico.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter Corsair 2020 has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Fender Albert Hammond Jr Stratocaster comes with a Synthetic Bone nut. Bone is the best natural material for guitar nuts. However, its tonal properties can be inconsistent. That's the problem that synthetic bone fixes. This is much better than using a plastic nut because the nut is more slippery—which helps with tuning stability—, and it gives your open strings rich harmonics.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter Corsair 2020's brige is a Bigsby Tremolo. Bigsby tremolos are built differently than regular tremolos. They have a stiffer arm, which is something a lot of people like because the arm won't wiggle around a lot. On the other hand, this type of tremolo is more complicated to restring and it might not be as newbie-friendly as other simpler tremolos.
On the other hand, the Fender Albert Hammond Jr Stratocaster's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Schecter Corsair 2020.
Tuners
Both come with regular tuners. The Schecter Corsair 2020's are Grover Rotomatic 18:1 while the Fender Albert Hammond Jr Stratocaster's are Fender Vintage F Stamped
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Schecter Corsair 2020 has a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
On the other hand, the Fender Albert Hammond Jr Stratocaster comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Fender Albert Hammond Jr Stratocaster.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Corsair 2020
- Expensive Wood
- Ivory Tusq Nut
- Coil Split Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Top Brand Pickups
- No Neck-Through Build
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender Albert Hammond Jr Stratocaster
- Expensive Wood
- Synthetic Bone Nut
- Top Brand Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42mm (1.654'').
This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.
If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Fender Albert Hammond Jr Stratocaster has the longest scale: 25.5". The Schecter Corsair 2020 is only 24.75" long. This is a 0.75'' (19.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter Corsair 2020 and the Fender Albert Hammond Jr Stratocaster have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender Albert Hammond Jr Stratocaster's fingerboard radius is smaller, which means it's more curved than the Schecter Corsair 2020's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Corsair 2020.
Fret Size
The Fender Albert Hammond Jr Stratocaster has Medium Jumbo frets, which should be taller than the Schecter Corsair 2020's Medium frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
