Swap
Swap
Schecter C-1 FR S SLS Elite
Ibanez RG5170G Prestige
VS
Playability
80
Sound
85
Build
80
Value
82
Score
82
FIND IT ON:
Sweetwater logo
Playability
73
Sound
84
Build
80
Value
69
Score
79
FIND IT ON:
Sweetwater logo
Add more to comparison

Schecter C-1 FR S SLS Elite vs Ibanez RG5170G Prestige

Reasons to Get
Schecter C-1 FR S SLS Elite over Ibanez RG5170G Prestige

Decorative Top
Flamed Maple vs None
Finished with beautiful natural wood patterns
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Compound Radius
12" to 16" vs 17"
Balanced playability for chords and single-notes
Neck Profile
Ultra Thin C vs Super Wizard
Comfortable neck that works for most people
Pickup Mods
Multiple vs Multi-Voicing
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Pickups
HH vs HSH
High output without hum
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.67'' (17mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.75'' (19.1mm)
More comfortable at higher frets for big hands
Nut Width
1.625'' (41.3mm) vs 1.693'' (43mm)
Favors small hands, easier bar chords and other shapes
Bridge
Floyd Rose vs Lo-Pro Edge
Allows intense vibratos and techniques like Dive Bombs
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
82 vs 69
Better price/quality relationship

Reasons to Get
Ibanez RG5170G Prestige over Schecter C-1 FR S SLS Elite

Country of Manufacturing
Japan vs South Korea
Built with higher quality standards
Release Year
2020 vs 2018
From a more recent year
Neck Profile
Super Wizard vs Ultra Thin C
Thinnest neck you can get for shredding
Pickup Mods
Multi-Voicing vs Multiple
Changes the voice (tones or gain) of the pickups
Switch Positions
5 vs 3
More tone options
Pickups
HSH vs HH
High output, round sound with a single-coil for cleans
Neck Thickness at 1st Fret
0.67'' (17mm) vs 0.748'' (19mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.75'' (19.1mm) vs 0.787'' (20mm)
More comfortable at higher frets for small hands
Nut Width
1.693'' (43mm) vs 1.625'' (41.3mm)
Less likely to mute strings by accident and more space for fingerstyle
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Lo-Pro Edge vs Floyd Rose
Intense vibratos with more features than a Floyd Rose
Pickups Power
Active vs Passive
More output

Other Key Differences
Schecter C-1 FR S SLS Elite vs Ibanez RG5170G Prestige

Neck Pickup
Sustainiac vs Fishman Fluence Modern Alnico
Different Neck Pickup
Body Wood
Ash vs Basswood
Different Body Wood
Headstock
3-3 vs 6
Different Headstock

Shared Features
Schecter C-1 FR S SLS Elite vs Ibanez RG5170G Prestige

Bridge Pickup
Fishman Fluence Modern Ceramic
Same Bridge Pickup
Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Nut Material
Locking
Same Nut Material
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Number of Frets
24
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Type of Frets
XL Jumbo vs Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Retainer Bar
  • High-Quality Nut
  • High-Quality Frets
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Schecter C-1 FR S SLS Elite Prices

SET PRICE ALERT

Ibanez RG5170G Prestige Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter C-1 FR S SLS Elite is probably the better product overall with its final score of 82 compared to the Ibanez RG5170G Prestige's 79 score, although not by a lot.

The Schecter C-1 FR S SLS Elite wins when it comes to sound, playability, value for the money. On the other hand, the Ibanez RG5170G Prestige has the upper hand when it comes to.

If you got small hands, you'll probably feel more comfortable playing the Schecter C-1 FR S SLS Elite.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Schecter C-1 FR S SLS Elite is the better choice.

The Schecter C-1 FR S SLS Elite meets 5 out of our 8 criteria items for beginner friendliness, while the Ibanez RG5170G Prestige meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Schecter C-1 FR S SLS Elite
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

New Player Friendliness

Ibanez RG5170G Prestige
  • Comfortable shape
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Schecter C-1 FR S SLS Elite Overview

  • From Schecter's 2018 SLS Elite series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Flamed Maple top
  • Swamp Ash body
  • Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Sustainiac (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose 1500 Series bridge
  • Ultra Thin C Neck-Through neck
  • 24 XL Jumbo Stainless Steel frets
  • Grover Rotomatic 18:1 tuners
  • Compare Specs >

Ibanez RG5170G Prestige Overview

  • From Ibanez's 2020 RG series
  • Made in Japan
  • 6 strings
  • 25.5"'' scale
  • 17" Fretboard Radius
  • Basswood body
  • Maple/Wenge neck
  • Bound Macassar Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Middle pickup: Fishman Fluence Single-Width (Single Coil/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 1 volume and 1 tone Bell knobs
  • 5-way Switch
  • Lo-Pro Edge tremolo bridge
  • Super Wizard Bolt-On neck
  • 24 Jumbo Stainless Steel frets
  • Gotoh machine heads tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Woods Used in the Schecter C-1 FR S SLS Elite

Ash wood pattern used for guitar building
Ash

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Woods Used in the Ibanez RG5170G Prestige

Basswood wood pattern used for guitar building
Basswood

Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.

Winner: Schecter C-1 FR S SLS Elite.

Pickup Configuration

The Schecter C-1 FR S SLS Elite has an HH configuration while the Ibanez RG5170G Prestige has HSH pickups.

Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

On the other hand, HSH is a versatile pickup configuration that will give you the high output, full tone, and quiet sound of humbucker pickups, but with the possibility of using a single coil for cleaner tones. The disadvantage is that the middle single-coil pickup will have a noticeable lower volume, so you might want to adjust the height of the pickups. Another problem is that if you set the middle pickup too high, it might interfere with your picking hand.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

You can purchase similar pickups to the Schecter C-1 FR S SLS Elite's and use them on any guitar:

We found the same or similar pickups to the Ibanez RG5170G Prestige's online:

The Schecter C-1 FR S SLS Elite's pickups are Passive while the Ibanez RG5170G Prestige's are Active.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Ibanez RG5170G Prestige gives you 5 switch options while the Schecter C-1 FR S SLS Elite gives you 3. This means that the Ibanez RG5170G Prestige gives you more options to find the right pickup combination for the type of sound you want to achieve

Both give you different pickup mod options.

The Schecter C-1 FR S SLS Elite offers Multi-Voicing, Sustainer.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.

On the other hand, the Ibanez RG5170G Prestige comes with the following: Multi-Voicing.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

Schecter C-1 FR S SLS Elite pickups switch and push knobs diagram
Schecter C-1 FR S SLS Elite's switch options
Ibanez RG5170G Prestige pickups switch selector and push knobs diagram
Ibanez RG5170G Prestige's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Ibanez RG5170G Prestige.

Final Sound Quality Scores

Schecter C-1 FR S SLS Elite
Pickups 85
Sustain 100
Versatility 69
Tuning Stability 85
Sound 85
Ibanez RG5170G Prestige
Pickups 85
Sustain 85
Versatility 80
Tuning Stability 85
Sound 84

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter C-1 FR S SLS Elite compares to the Ibanez RG5170G Prestige.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Schecter C-1 FR S SLS Elite is built in South Korea while the Ibanez RG5170G Prestige is made in Japan.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.

Winner: Ibanez RG5170G Prestige

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Locking nuts. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Both models come with a retainer bar, which is helpful when changing the strings on a double-locking tremolo. Without it, the strings would change pitch once you lock down the nut, so you'd have to make more micro-adjustments at the bridge to tune it correctly

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Schecter C-1 FR S SLS Elite's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

On the other hand, the Ibanez RG5170G Prestige's is a Lo-Pro Edge. Similar to the original Edge bridge design by Ibanez, but with a lower profile (more discrete and less likely to interfere with your picking). It comes with the same improvements over Floyd Rose tremolos as the Edge: push-in arm, replaceable knife edges, more sustain, smaller saddles, and more. These bridges offer tons of versatility, but they also require more work than simpler tremolos to set up.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Ibanez RG5170G Prestige.

Tuners

Both come with regular tuners. The Schecter C-1 FR S SLS Elite's are Grover Rotomatic 18:1 while the Ibanez RG5170G Prestige's are Gotoh machine heads

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Schecter C-1 FR S SLS Elite has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Ibanez RG5170G Prestige comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Schecter C-1 FR S SLS Elite.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter C-1 FR S SLS Elite
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Multi-Voicing, Sustainer Pickups
  • Tremolo
  • Compound Radius Fretboard
  • Retainer Bar
  • No Locking Tuners
  • Made in South Korea
  • No Weight Relief
  • No Luminescent Inlay
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Ibanez RG5170G Prestige
  • Stainless Steel Frets
  • Made in Japan
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Multi-Voicing Pickups
  • Luminescent Inlay
  • Tremolo
  • Retainer Bar
  • No Locking Tuners
  • No Neck-Through Build
  • No Weight Relief
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter C-1 FR S SLS Elite
Quality of materials 75
Features 90
Quality Control 75
Build Quality 80
Ibanez RG5170G Prestige
Quality of materials 71
Features 75
Quality Control 95
Build Quality 80

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter C-1 FR S SLS Elite Nut Width
Schecter C-1 FR S SLS Elite Nut Width
Ibanez RG5170G Prestige Nut Width
Ibanez RG5170G Prestige Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Ibanez RG5170G Prestige has the wider nut with 43mm (1.693'') vs 41.3mm (1.625''). This is a 1.7mm (0.068'') difference

This means that it will be more difficult to do bar chords on the Ibanez RG5170G Prestige, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Schecter C-1 FR S SLS Elite and Ibanez RG5170G Prestige's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter C-1 FR S SLS Elite Neck Profile
Schecter C-1 FR S SLS Elite's neck profile
Ibanez RG5170G Prestige Neck Profile
Ibanez RG5170G Prestige's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Schecter C-1 FR S SLS Elite has a C type of neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

The Ibanez RG5170G Prestige, on the other hand, has a Super Wizard neck. Ibanez is famous for this neck shape. They're similar to C-shaped necks, but they're even thinner. Some people like it because it gives them all the free room they need to play fast single notes (shredding). But some people prefer a thicker type of neck they can grab and rest their hands more comfortably.

Fretboard Radius

Schecter C-1 FR S SLS Elite Fretboard Compound Radius
Schecter C-1 FR S SLS Elite's Compound Fretboard Radius
Ibanez RG5170G Prestige Fingerboard Radius
Ibanez RG5170G Prestige's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter C-1 FR S SLS Elite is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Ibanez RG5170G Prestige favors large hands more than the Schecter C-1 FR S SLS Elite. But it's still more comfortable for people with small hands, as you can see in the score meter below.

Schecter C-1 FR S SLS Elite:
Big Hands
Small Hands
Ibanez RG5170G Prestige:
Big Hands
Small Hands

Fret Size

Schecter C-1 FR S SLS Elite Frets Size
Schecter C-1 FR S SLS Elite's Frets Size
Ibanez RG5170G Prestige Frets Size
Ibanez RG5170G Prestige's Frets Size

The Schecter C-1 FR S SLS Elite has XL Jumbo frets, which should be taller than the Ibanez RG5170G Prestige's Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Schecter C-1 FR S SLS Elite
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 100
Playability 80
Ibanez RG5170G Prestige
Bending & Vibrato Ease 80
Chord Playability 50
Solo Playability 90
Playability 73

Specs Side-by-Side

Schecter C-1 FR S SLS Elite vs Ibanez RG5170G Prestige
General Schecter C-1 FR S SLS Elite Ibanez RG5170G Prestige
Brand: Schecter Ibanez
Year: 2018 2020
Configuration: HH HSH
Strings: 6 6
Made in: South Korea Japan
Series: SLS Elite RG
Colors: Black, Orange Black, Silver
Left-Handed Version: Yes No
Body
Type: Solid Body Solid Body
Body Material: Swamp Ash Basswood
Bridge: Floyd Rose 1500 Series Lo-Pro Edge tremolo
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Grover Rotomatic 18:1 Gotoh machine heads
Fretboard: Ebony Bound Macassar Ebony
Neck Material: Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods Maple/Wenge
Decoration: Abalone Offset/Reverse Dots Off-set Mother of Pearl dot
Scale Size: 25.5" 25.5"
Shape: Ultra Thin C Super Wizard
Thickness: 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm) 1st Fret: 0.67'' (17mm) - 12th Fret: 0.75'' (19.1mm)
Frets: 24 XL Jumbo Stainless Steel 24 Jumbo Stainless Steel
Fretboard Radius: 12" to 16" 17"
Nut: Locking Locking
Nut Width: 41.3mm (1.625'') 43mm (1.693'')
Electronics
Bridge Pickup: Fishman Fluence Modern Ceramic (Humbucker / Active) Fishman Fluence Modern Ceramic (Humbucker / Active)
Middle Pickup: Fishman Fluence Single-Width (Single Coil / Active)
Neck Pickup: Sustainiac (Humbucker / Passive) Fishman Fluence Modern Alnico (Humbucker / Active)
Switch: 3 Way 5 Way
Knobs: Dome Bell
Pickup Mods: Multi-Voicing, Sustainer Multi-Voicing
Volume Controls: 1 1
Tone Controls: 1 1