Swap
Swap
Schecter C-1 FR S Apocalypse
Schecter C-7 FR S Apocalypse
VS
Playability
77
Sound
85
Build
77
Value
80
Score
80
FIND IT ON:
Sweetwater logoMusician's Friend logoAmazon logo
Playability
77
Sound
85
Build
77
Value
80
Score
80
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add more to comparison

Schecter C-1 FR S Apocalypse vs C-7 FR S Apocalypse

Reasons to Get
Schecter C-1 FR S Apocalypse over C-7 FR S Apocalypse

Strings
6 vs 7
Narrower neck and fewer strings to change
Scale Length
25.5'' (647.7mm) vs 26.5'' (673.1mm)
Easier bending, shorter fret separation and warmer natural tone

Reasons to Get
Schecter C-7 FR S Apocalypse over C-1 FR S Apocalypse

Release Year
2019 vs 2017
From a more recent year
Strings
7 vs 6
Allows you to play lower notes
Scale Length
26.5'' (673.1mm) vs 25.5'' (647.7mm)
Lower action and brighter natural tone

Other Key Differences
Schecter C-1 FR S Apocalypse vs C-7 FR S Apocalypse

Bridge Pickup
Schecter USA Apocalypse-VI vs Schecter USA Apocalypse-VII
Different Bridge Pickup
Headstock
3-3 vs 3-4
Different Headstock

Shared Features
Schecter C-1 FR S Apocalypse vs C-7 FR S Apocalypse

Neck Pickup
Sustainiac
Same Neck Pickup
Body Wood
Ash
Same Body Wood
Neck Wood
Maple
Same Neck Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Nut Material
Locking
Same Nut Material
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
2
Same tone control
Pickups
HH
High output without hum
Number of Frets
24
Same maximum octave
Neck Thickness at 1st Fret
0.79'' (20.1mm)
Same neck comfortability
Neck Thickness at 12th Fret
0.87'' (22.1mm)
Same neck comfortability
Nut Width
1.625'' (41.3mm)
Same string separation at the nut
Tuner Ratio
18
Same tuning precision
Paint Finish
Poly
Resistant paint that ages well
Bridge
Floyd Rose
Allows intense vibratos and techniques like Dive Bombs
Pickups Power
Passive
Cleaner sound and no battery needed
Compound Radius
12" to 16"
Balanced playability for chords and single-notes
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Set
Neck is glued to the body
Type of Frets
XL Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • Pickup Alter Switch/Knob
  • Retainer Bar
  • High-Quality Nut
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Top Pickup Brand
  • Expensive Wood

Common Weaknesses

  • Neck-Through Build
  • Weight Relief
  • Stays in Tune (Evertune)
  • From a High-Quality-Standards Country
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 80 out of 100, which makes them similar in terms of quality.

The Schecter C-7 FR S Apocalypse wins when it comes to. On the other hand, the Schecter C-1 FR S Apocalypse has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Schecter C-1 FR S Apocalypse
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

New Player Friendliness

Schecter C-7 FR S Apocalypse
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Schecter C-1 FR S Apocalypse Overview

  • From Schecter's 2017 Apocalypse series
  • Made in South Korea
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Swamp Ash body
  • Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Schecter USA Apocalypse-VI (Humbucker/Passive)
  • Neck pickup: Sustainiac (Humbucker/Passive)
  • 1 volume and 2 tone Dome knobs
  • 3-way Switch
  • Floyd Rose 1500 Series bridge
  • Thin C Set neck
  • 24 XL Jumbo Stainless Steel frets
  • Grover Rotomatic 18:1 tuners
  • Compare Specs >

Schecter C-7 FR S Apocalypse Overview

  • From Schecter's 2019 Apocalypse series
  • Made in South Korea
  • 7 strings
  • 26.5"'' scale
  • 12" to 16" Fretboard Radius
  • Swamp Ash body
  • Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Schecter USA Apocalypse-VII (Humbucker/Passive)
  • Neck pickup: Sustainiac (Humbucker/Passive)
  • 1 volume and 2 tone Dome knobs
  • 3-way Switch
  • Floyd Rose 1500 Series bridge
  • Thin C Set neck
  • 24 XL Jumbo Stainless Steel frets
  • Grover Rotomatic 18:1 tuners
  • Weight between 7.65lbs (3.5kgs) and 8.25lbs (3.7kgs)
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in Both

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Ash wood pattern used for guitar building
Ash

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Winner: Tie.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Tie.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both offer you the same type of pickup mod: Sustainer.

The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.

They both share the following switching options:

Schecter C-1 FR S Apocalypse and Schecter C-7 FR S Apocalypse pickups switch and push knobs diagram
Schecter C-1 FR S Apocalypse and Schecter C-7 FR S Apocalypse's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Tie.

Final Sound Quality Scores

Schecter C-1 FR S Apocalypse
Pickups 85
Sustain 100
Versatility 71
Tuning Stability 85
Sound 85
Schecter C-7 FR S Apocalypse
Pickups 85
Sustain 100
Versatility 71
Tuning Stability 85
Sound 85

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter C-1 FR S Apocalypse compares to the Schecter C-7 FR S Apocalypse.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in South Korea.

South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Locking nuts. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

Both models come with a retainer bar, which is helpful when changing the strings on a double-locking tremolo. Without it, the strings would change pitch once you lock down the nut, so you'd have to make more micro-adjustments at the bridge to tune it correctly

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

Both come with regular tuners. Both come with Grover Rotomatic 18:1.

Both of them have a 18:1 tuner ratio. This means that it will take 18 turns of the keys to give the tuning posts an entire turn. Higher ratio means more precise tuning (and more time spent tuning your gutiar). Most guitars have a 18:1 ratio, while the most precise tuning can be achieved with a 21:1 ratio.

Winner: Tie.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

Both have a Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter C-1 FR S Apocalypse
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Sustainer Pickups
  • Luminescent Inlay
  • Tremolo
  • Compound Radius Fretboard
  • Retainer Bar
  • No Locking Tuners
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Schecter C-7 FR S Apocalypse
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Sustainer Pickups
  • Luminescent Inlay
  • Tremolo
  • Compound Radius Fretboard
  • Retainer Bar
  • No Locking Tuners
  • Made in South Korea
  • No Neck-Through Build
  • No Weight Relief
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter C-1 FR S Apocalypse
Quality of materials 71
Features 85
Quality Control 75
Build Quality 77
Schecter C-7 FR S Apocalypse
Quality of materials 71
Features 85
Quality Control 75
Build Quality 77

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter C-1 FR S Apocalypse Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 41.3mm (1.625'').

This is considered a narrow width for a 6-string guitar. This means that this guitar will have a narrower string separation at the nut, which will affect your fretting hand.

If you are a player with big hands, you might find it difficult to play chords without muting strings. However, this is good for players who have smaller hands, as it will allow them to reach each string more easily at the nut.

Scale Length

Schecter C-1 FR S Apocalypse's Scale Length
Schecter C-1 FR S Apocalypse's Scale Length
Schecter C-7 FR S Apocalypse's Scale Length
Schecter C-7 FR S Apocalypse's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Schecter C-7 FR S Apocalypse has the longest scale: 26.5". The Schecter C-1 FR S Apocalypse is only 25.5" long. This is a 1'' (25.4mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter C-1 FR S Apocalypse Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Schecter C-1 FR S Apocalypse and the Schecter C-7 FR S Apocalypse have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Schecter C-1 FR S Apocalypse Fretboard Compound Radius
Schecter C-1 FR S Apocalypse's Compound Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both have a compound radius. This means both offer you the best craftsmanship when it comes to fretboard design. You'll have an arc to help you play chords close to the nut, while also having a flat design at the higher frets for faster soloing and easier bends.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Schecter C-1 FR S Apocalypse:
Big Hands
Small Hands
Schecter C-7 FR S Apocalypse:
Big Hands
Small Hands

Fret Size

Schecter C-1 FR S Apocalypse and Schecter C-7 FR S Apocalypse Frets Size
Both have a similar XL Jumbo fret size

Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.

Final Playability Scores

Schecter C-1 FR S Apocalypse
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 90
Playability 77
Schecter C-7 FR S Apocalypse
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 90
Playability 77

Specs Side-by-Side

Schecter C-1 FR S Apocalypse vs C-7 FR S Apocalypse
General Schecter C-1 FR S Apocalypse C-7 FR S Apocalypse
Brand: Schecter Schecter
Year: 2017 2019
Configuration: HH HH
Strings: 6 7
Made in: South Korea South Korea
Series: Apocalypse Apocalypse
Colors: Red Patterns, Natural Gray Red Patterns
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Swamp Ash Swamp Ash
Bridge: Floyd Rose 1500 Series Floyd Rose 1500 Series
Neck
Neck Joint: Set Set
Tuners: Grover Rotomatic 18:1 Grover Rotomatic 18:1
Fretboard: Ebony Ebony
Neck Material: Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods Maple/Padauk Multi-ply w/Carbon Fiber Reinforcement Rods
Decoration: Roman Numerals Roman Numerals
Scale Size: 25.5" 26.5"
Shape: Thin C Thin C
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm)
Frets: 24 XL Jumbo Stainless Steel 24 XL Jumbo Stainless Steel
Fretboard Radius: 12" to 16" 12" to 16"
Nut: Locking Locking
Nut Width: 41.3mm (1.625'') 41.3mm (1.625'')
Electronics
Bridge Pickup: Schecter USA Apocalypse-VI (Humbucker / Passive) Schecter USA Apocalypse-VII (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Sustainiac (Humbucker / Passive) Sustainiac (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Sustainer Sustainer
Volume Controls: 1 1
Tone Controls: 2 2