Show Full Spec Comparison
Schecter Banshee Mach-7 | Banshee Mach-7 Evertune | |
---|---|---|
General | ||
Brand: | Schecter | Schecter |
Year: | 2020 | 2020 |
Configuration: | HH | HH |
Strings: | 7 | 7 |
Made in: | South Korea | South Korea |
Series: | Banshee Mach | Banshee Mach |
Colors: | Black Burst, Natural Burst | Black Burst, Natural Burst |
Left-Handed Version: | Yes | Yes |
Body | ||
Type: | Solid Body | Solid Body |
Body Material: | Swamp Ash | Swamp Ash |
Bridge: | Hipshot Ibby HM Guitar Bridge | Evertune F7 Model |
Neck | ||
Neck Joint: | Neck-Through | Neck-Through |
Tuners: | Schecter Locking | Schecter Locking |
Fretboard: | Ebony | Ebony |
Neck Material: | Roasted Maple/Purpleheart Multi-ply with Carbon Fiber Reinforcement Rods | Roasted Maple/Purpleheart Multi-ply with Carbon Fiber Reinforcement Rods |
Decoration: | Offset/Reverse Roman Numerals | Offset/Reverse Roman Numerals |
Scale Size: | 26.5" | 26.5" |
Shape: | Ultra Thin U | Ultra Thin U |
Thickness: | 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm) | 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm) |
Frets: | 24 XL Jumbo Stainless Steel | 24 XL Jumbo Stainless Steel |
Fretboard Radius: | 12" to 16" | 12" to 16" |
Nut: | Compensated | Compensated |
Nut Width: | 48mm (1.89'') | 48mm (1.89'') |
Electronics | ||
Bridge Pickups: | Lundgren M7 (Humbucker / Passive) | Lundgren M7 (Humbucker / Passive) |
Middle Pickup: | ||
Neck Pickup: | Lundgren M7 (Humbucker / Passive) | Lundgren M7 (Humbucker / Passive) |
Switch: | 3 Way | 3 Way |
Knobs: | Dome | Dome |
Pickup Mods: | Coil Split | Coil Split |
Volume Controls: | 1 | 1 |
Tone Controls: | 1 | 1 |
Hardware | ||
Strap Lock: | No | No |
Hardware Color: | Black & Chrome | Black & Chrome |
Show Diagrams Comparison
Reasons to Get
Schecter Banshee Mach-7 over Banshee Mach-7 Evertune
Reasons to Get
Schecter Banshee Mach-7 Evertune over Banshee Mach-7
Other Key Differences
Schecter Banshee Mach-7 vs Banshee Mach-7 Evertune
Shared Features
Schecter Banshee Mach-7 vs Banshee Mach-7 Evertune
Common Strengths
- Neck-Through Build
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Nut
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- From a High-Quality-Standards Country
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor large hands .
Schecter Banshee Mach-7:
Schecter Banshee Mach-7 Evertune:
Beginner Friendliness
The Schecter Banshee Mach-7 meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter Banshee Mach-7 Evertune meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter Banshee Mach-7- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
New Player Friendliness
Schecter Banshee Mach-7 Evertune- Comfortable shape
- Locking tuners
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Both offer you the same type of pickup mod: Coil Split.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Banshee Mach-7 compares to the Schecter Banshee Mach-7 Evertune.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in South Korea.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Compensated nuts. Each hole where the string sits at the nut is cut at a different distance from the bridge, which compensates for the different amount of tension that each string is subject to. This fixes most intonation issues across the fretboard, so it gives great tuning stability.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Schecter Banshee Mach-7's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Schecter Banshee Mach-7 Evertune's is a Evertune. It will keep your guitar in tune and intonated until the next string swap. If you really like extremely subtle vibratos, this might not be the bridge for you because you won't be able to perform them as well. However, the fact that you won't need to tune your guitar is a huge advantage that many people will gladly pay the extra price for.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Schecter Banshee Mach-7 Evertune.
Tuners
They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Banshee Mach-7
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Compensated Nut
- Top Brand Pickups
- Neck-Through Build
- Coil Split Pickups
- Luminescent Inlay
- Compound Radius Fretboard
- Made in South Korea
- No Weight Relief
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Schecter Banshee Mach-7 Evertune
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Compensated Nut
- Top Brand Pickups
- Neck-Through Build
- Coil Split Pickups
- Stays in Tune (Evertune)
- Luminescent Inlay
- Compound Radius Fretboard
- Made in South Korea
- No Weight Relief
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 48mm (1.89'').
This is considered a wide width for a 7-string guitar. It gives your fingers the extra space you need to play without muting accidentally, but this also makes bar chords harder to perform, especially if you have small hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 26.5".
This scale is close to the popular 25.50" length, but adding an additional inch allows you to tune your strings lower while keeping the action low without causing fret buzz. This is useful for lower tunings, 7-string, or even classical guitars.
You want to avoid such a long scale if you don't plan to play in low tunings since the longer scale also means the frets are more separated, making it harder to play fast, especially for small hands.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter Banshee Mach-7 and the Schecter Banshee Mach-7 Evertune have a U-shaped neck. This is also referred to as ''baseball neck'' because of its shape. It's usually thick, which is why some people with big hands like it. However, they can also be thin, similar to a C shape, but with more shoulders for a better grip.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both have a compound radius. This means both offer you the best craftsmanship when it comes to fretboard design. You'll have an arc to help you play chords close to the nut, while also having a flat design at the higher frets for faster soloing and easier bends.
Fret Size
Both have a XL Jumbo fret size. These are really tall frets made like this so you don't meet any resistance when playing techniques like vibrato, bending, tapping, etc. They should make the guitar easier to play, but you have to be careful not to get the notes out of pitch by pressing down too hard, which might happen since the fretboard will be too low to stop your hand.