Swap
Swap
Schecter Avenger FR SLS Elite Evil Twin
Harley Benton Fusion-III HH Roasted
VS
Playability
80
Sound
82
Build
80
Value
81
Score
81
FIND IT ON:
Musician's Friend logoSweetwater logo
Playability
70
Sound
77
Build
69
Value
82
Score
72
FIND IT ON:
Thomann logo
Add more to comparison

Schecter Avenger FR SLS Elite Evil Twin vs Harley Benton Fusion-III HH Roasted

Reasons to Get
Schecter Avenger FR SLS Elite Evil Twin over Harley Benton Fusion-III HH Roasted

Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Type of Frets
XL Jumbo vs Medium Jumbo
You won't feel the fretboard when pressing down the strings
Compound Radius
12" to 16" vs 12"
Balanced playability for chords and single-notes
Pickup Mods
Multiple vs Coil Split
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.748'' (19mm) vs 0.807'' (20.5mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.787'' (20mm) vs 0.886'' (22.5mm)
More comfortable at higher frets for small hands
Nut Width
1.625'' (41.3mm) vs 1.654'' (42mm)
Favors small hands, easier bar chords and other shapes
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Floyd Rose vs Tremolo
Allows intense vibratos and techniques like Dive Bombs
Pickups Power
Active vs Passive
More output

Reasons to Get
Harley Benton Fusion-III HH Roasted over Schecter Avenger FR SLS Elite Evil Twin

Number of Frets
22 vs 24
Warmer neck pickup
Type of Frets
Medium Jumbo vs XL Jumbo
You'll feel the fretboard when pressing down the strings
Pickup Mods
Coil Split vs Multiple
Splits humbuckers into single coil pickups
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.807'' (20.5mm) vs 0.748'' (19mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.886'' (22.5mm) vs 0.787'' (20mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 1.625'' (41.3mm)
Less likely to mute strings by accident and more space for fingerstyle
Bridge
Tremolo vs Floyd Rose
Simple vibratos without too much maintenance
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
82 vs 81
Better price/quality relationship

Other Key Differences
Schecter Avenger FR SLS Elite Evil Twin vs Harley Benton Fusion-III HH Roasted

Bridge Pickup
Fishman Fluence Modern Ceramic vs Roswell LAF-B-GD Alnico-5
Different Bridge Pickup
Neck Pickup
Fishman Fluence Modern Alnico vs Roswell LAF-N-GD Alnico-5
Different Neck Pickup
Body Wood
Ash vs Nyatoh
Different Body Wood
Neck Wood
Maple vs Roasted Maple
Different Neck Wood
Fretboard Wood
Ebony vs Roasted Maple
Different Fretboard Wood
Headstock
2-4 vs 6
Different Headstock
Nut Material
Locking vs NuBone
Different Nut Material

Shared Features
Schecter Avenger FR SLS Elite Evil Twin vs Harley Benton Fusion-III HH Roasted

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Switch Positions
3
Same pickups versatility
Volume Knobs
1
Same volume control
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Neck Profile Type
C
Comfortable neck that works for most people

Common Strengths

  • High-Quality Nut
  • High-Quality Frets
  • Top Pickup Brand

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

Harley Benton Fusion-III HH Roasted Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Schecter Avenger FR SLS Elite Evil Twin is probably the better product overall with its final score of 81 compared to the Harley Benton Fusion-III HH Roasted's 72 score, although not by a lot.

The Schecter Avenger FR SLS Elite Evil Twin wins when it comes to sound, playability, build quality. On the other hand, the Harley Benton Fusion-III HH Roasted has the upper hand when it comes to value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Harley Benton Fusion-III HH Roasted is the better choice.

The Harley Benton Fusion-III HH Roasted meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter Avenger FR SLS Elite Evil Twin meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Schecter Avenger FR SLS Elite Evil Twin
  • Comfortable shape
  • Comfortable fretboard
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Short scale
  • Locking tuners
  • Easy-to-use bridge

New Player Friendliness

Harley Benton Fusion-III HH Roasted
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Schecter Avenger FR SLS Elite Evil Twin Overview

  • From Schecter's 2021 SLS Elite series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Swamp Ash body
  • Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods neck
  • Ebony fretboard
  • Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
  • Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Floyd Rose 1500 Series bridge
  • Ultra Thin C Neck-Through neck
  • 24 XL Jumbo Stainless Steel frets
  • Grover tuners
  • Compare Specs >

Harley Benton Fusion-III HH Roasted Overview

  • From Harley Benton's 2021 Pro series
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Nyatoh body
  • Roasted Maple neck
  • Roasted Maple fretboard
  • Bridge pickup: Roswell LAF-B-GD Alnico-5 (Humbucker/Passive)
  • Neck pickup: Roswell LAF-N-GD Alnico-5 (Humbucker/Passive)
  • 1 volume and 1 tone Dome knobs
  • 3-way Switch
  • Wilkinson Tremolo bridge
  • Harley Benton Modern C Bolt-On neck
  • 22 Medium Jumbo Stainless Steel frets
  • WSC staggered locking die-cast tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Schecter Avenger FR SLS Elite Evil Twin

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Ash wood pattern used for guitar building
Ash

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.

Woods Used in the Harley Benton Fusion-III HH Roasted

Roasted Maple wood pattern used for guitar building
Roasted Maple
Nyatoh wood pattern used for guitar building
Nyatoh

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.

Winner: Schecter Avenger FR SLS Elite Evil Twin.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Harley Benton Fusion-III HH Roasted has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

You can purchase similar pickups to the Schecter Avenger FR SLS Elite Evil Twin's and use them on any guitar:

The Schecter Avenger FR SLS Elite Evil Twin's pickups are Active while the Harley Benton Fusion-III HH Roasted's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Harley Benton Fusion-III HH Roasted.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

Both are equal when it comes to the pickup switching option.

Both give you different pickup mod options.

The Schecter Avenger FR SLS Elite Evil Twin offers Coil Split, Multi-Voicing.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.

On the other hand, the Harley Benton Fusion-III HH Roasted comes with the following: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Schecter Avenger FR SLS Elite Evil Twin pickups switch and push knobs diagram
Schecter Avenger FR SLS Elite Evil Twin's switch options
Harley Benton Fusion-III HH Roasted pickups switch and push knobs diagram
Harley Benton Fusion-III HH Roasted's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Tie.

Final Sound Quality Scores

Schecter Avenger FR SLS Elite Evil Twin
Pickups 85
Sustain 85
Versatility 74
Tuning Stability 85
Sound 82
Harley Benton Fusion-III HH Roasted
Pickups 90
Sustain 70
Versatility 74
Tuning Stability 75
Sound 77

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Avenger FR SLS Elite Evil Twin compares to the Harley Benton Fusion-III HH Roasted.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Indonesia.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Schecter Avenger FR SLS Elite Evil Twin has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the Harley Benton Fusion-III HH Roasted comes with a NuBone nut. It's made by the same company that makes TUSQ nuts. It's slightly softer but hard enough to give you a brighter sound when playing open strings. It's also self-lubricating, so it's good for tuning stability.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Both in this comparison come with stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Schecter Avenger FR SLS Elite Evil Twin's brige is a Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.

On the other hand, the Harley Benton Fusion-III HH Roasted's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Schecter Avenger FR SLS Elite Evil Twin.

Tuners

The Harley Benton Fusion-III HH Roasted has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the Schecter Avenger FR SLS Elite Evil Twin has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: Harley Benton Fusion-III HH Roasted.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Schecter Avenger FR SLS Elite Evil Twin has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Harley Benton Fusion-III HH Roasted comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Schecter Avenger FR SLS Elite Evil Twin.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter Avenger FR SLS Elite Evil Twin
  • Stainless Steel Frets
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Coil Split, Multi-Voicing Pickups
  • Luminescent Inlay
  • Tremolo
  • Compound Radius Fretboard
  • Retainer Bar
  • No Locking Tuners
  • Made in Indonesia
  • No Weight Relief
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Harley Benton Fusion-III HH Roasted
  • Stainless Steel Frets
  • Locking Tuners
  • NuBone Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Tremolo
  • Made in Indonesia
  • No Expensive Woods
  • No Neck-Through Build
  • No Weight Relief
  • No Luminescent Inlay
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter Avenger FR SLS Elite Evil Twin
Quality of materials 71
Features 95
Quality Control 75
Build Quality 80
Harley Benton Fusion-III HH Roasted
Quality of materials 71
Features 70
Quality Control 65
Build Quality 69

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter Avenger FR SLS Elite Evil Twin Nut Width
Schecter Avenger FR SLS Elite Evil Twin Nut Width
Harley Benton Fusion-III HH Roasted Nut Width
Harley Benton Fusion-III HH Roasted Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Harley Benton Fusion-III HH Roasted has the wider nut with 42mm (1.654'') vs 41.3mm (1.625''). This is a 0.7mm (0.029'') difference

This means that it will be more difficult to do bar chords on the Harley Benton Fusion-III HH Roasted, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Schecter Avenger FR SLS Elite Evil Twin and Harley Benton Fusion-III HH Roasted's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter Avenger FR SLS Elite Evil Twin Neck Profile
Schecter Avenger FR SLS Elite Evil Twin's neck profile
Harley Benton Fusion-III HH Roasted Neck Profile
Harley Benton Fusion-III HH Roasted's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Schecter Avenger FR SLS Elite Evil Twin and the Harley Benton Fusion-III HH Roasted have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Schecter Avenger FR SLS Elite Evil Twin Fretboard Compound Radius
Schecter Avenger FR SLS Elite Evil Twin's Compound Fretboard Radius
Harley Benton Fusion-III HH Roasted Fingerboard Radius
Harley Benton Fusion-III HH Roasted's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Schecter Avenger FR SLS Elite Evil Twin is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Schecter Avenger FR SLS Elite Evil Twin:
Big Hands
Small Hands
Harley Benton Fusion-III HH Roasted:
Big Hands
Small Hands

Fret Size

Schecter Avenger FR SLS Elite Evil Twin Frets Size
Schecter Avenger FR SLS Elite Evil Twin's Frets Size
Harley Benton Fusion-III HH Roasted Frets Size
Harley Benton Fusion-III HH Roasted's Frets Size

The Schecter Avenger FR SLS Elite Evil Twin has XL Jumbo frets, which should be taller than the Harley Benton Fusion-III HH Roasted's Medium Jumbo frets.

Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

Final Playability Scores

Schecter Avenger FR SLS Elite Evil Twin
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 100
Playability 80
Harley Benton Fusion-III HH Roasted
Bending & Vibrato Ease 70
Chord Playability 70
Solo Playability 70
Playability 70

Specs Side-by-Side

Schecter Avenger FR SLS Elite Evil Twin vs Harley Benton Fusion-III HH Roasted
General Schecter Avenger FR SLS Elite Evil Twin Harley Benton Fusion-III HH Roasted
Brand: Schecter Harley Benton
Year: 2021 2021
Configuration: HH HH
Strings: 6 6
Made in: Indonesia Indonesia
Series: SLS Elite Pro
Colors: Black Satin Gray
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Swamp Ash Nyatoh
Bridge: Floyd Rose 1500 Series Wilkinson Tremolo
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Grover WSC staggered locking die-cast
Fretboard: Ebony Roasted Maple
Neck Material: Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods Roasted Maple
Decoration: Roman Numerals Black Dot
Scale Size: 25.5" 25.5"
Shape: Ultra Thin C Harley Benton Modern C
Thickness: 1st Fret: 0.748'' (19mm) - 12th Fret: 0.787'' (20mm) 1st Fret: 0.807'' (20.5mm) - 12th Fret: 0.886'' (22.5mm)
Frets: 24 XL Jumbo Stainless Steel 22 Medium Jumbo Stainless Steel
Fretboard Radius: 12" to 16" 12"
Nut: Locking NuBone
Nut Width: 41.3mm (1.625'') 42mm (1.654'')
Electronics
Bridge Pickup: Fishman Fluence Modern Ceramic (Humbucker / Active) Roswell LAF-B-GD Alnico-5 (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Fishman Fluence Modern Alnico (Humbucker / Active) Roswell LAF-N-GD Alnico-5 (Humbucker / Passive)
Switch: 3 Way 3 Way
Knobs: Dome Dome
Pickup Mods: Coil Split, Multi-Voicing Coil Split
Volume Controls: 1 1
Tone Controls: 1 1