Swap
Swap
Schecter Aaron Marshall AM-7 USA
Gibson 70s Flying V
VS
Playability
72
Sound
76
Build
82
Value
62
Score
77
FIND IT ON:
Sweetwater logoMusician's Friend logo
Playability
73
Sound
72
Build
69
Value
66
Score
71
FIND IT ON:
Musician's Friend logoSweetwater logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Schecter Aaron Marshall AM-7 USA vs Gibson 70s Flying V Specs Comparison
Schecter Aaron Marshall AM-7 USA Gibson 70s Flying V
General
Brand: Schecter Gibson
Year: 2024 2019
Configuration: HH HH
Strings: 7 6
Made in: United States United States
Series: Artist Original Collection
Colors: Red White
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Alder Mahogany
Bridge: Hipshot Ibby HM Aluminum Nashville Tune-O-Matic
Neck
Neck Joint: Bolt-On Set
Tuners: Custom Aaron Marshall Hipshot Locking Grover Rotomatics w/ Kidney Buttons
Fretboard: Quartersawn Roasted Maple Rosewood
Neck Material: Quartersawn Roasted Maple Mahogany
Decoration: 3mm Shifted Offset Black Acrylic Dots Acrylic Dots
Scale Size: 26.5" 24.75"
Shape: Custom Thin "C" Slim Taper
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.84'' (21.3mm) 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.92'' (23.4mm)
Frets: 24 Medium Jumbo Stainless Steel 22 Medium Jumbo Nickel Silver
Fretboard Radius: 16" 12"
Nut: Black Tusq XL Ivory Tusq
Nut Width: 48mm (1.89'') 43mm (1.693'')
Electronics
Bridge Pickups: Aaron Marshall Signature USA Solstice (Humbucker / Passive) Gibson 70s Tribute (Humbucker / Passive)
Middle Pickup:
Neck Pickup: Aaron Marshall Signature USA Equinox (Humbucker / Passive) Gibson 70s Tribute (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Dome Bell
Pickup Mods: None None
Volume Controls: 1 2
Tone Controls: 1 1
Hardware
Strap Lock: No No
Hardware Color: Black Chrome
Show Diagrams Comparison
Schecter Aaron Marshall AM-7 USA pickups switch selector and push knobs diagram
Schecter Aaron Marshall AM-7 USA's switch options
Gibson 70s Flying V pickups switch and push knobs diagram
Gibson 70s Flying V's switch options

Reasons to Get
Schecter Aaron Marshall AM-7 USA over Gibson 70s Flying V

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2024 vs 2019
From a more recent year
Neck Joint
Bolt-On vs Set
Allows you to detach and swap the neck
Strings
7 vs 6
Allows you to play lower notes
Switch Positions
5 vs 3
More tone options
Number of Frets
24 vs 22
Allows to reach higher notes
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.82'' (20.8mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.84'' (21.3mm) vs 0.92'' (23.4mm)
More comfortable at higher frets for small hands
Nut Width
1.89'' (48mm) vs 1.693'' (43mm)
Less likely to mute strings by accident and more space for fingerstyle
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Scale Length
26.5'' (673.1mm) vs 24.75'' (628.7mm)
Lower action and brighter natural tone
Fretboard Radius
16'' (406.4mm) vs 12'' (304.8mm)
Flatter fretboard makes it easier to play single notes and bend

Reasons to Get
Gibson 70s Flying V over Schecter Aaron Marshall AM-7 USA

Strings
6 vs 7
Narrower neck and fewer strings to change
Volume Knobs
2 vs 1
More volume control
Neck Thickness at 1st Fret
0.82'' (20.8mm) vs 0.79'' (20.1mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.92'' (23.4mm) vs 0.84'' (21.3mm)
More comfortable at higher frets for big hands
Nut Width
1.693'' (43mm) vs 1.89'' (48mm)
Favors small hands, easier bar chords and other shapes
Scale Length
24.75'' (628.7mm) vs 26.5'' (673.1mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
12'' (304.8mm) vs 16'' (406.4mm)
Easier to play chords without muting strings
Value Score
66 vs 62
Better price/quality relationship

Other Key Differences
Schecter Aaron Marshall AM-7 USA vs Gibson 70s Flying V

Bridge Pickup
Aaron Marshall Signature USA Solstice vs Gibson 70s Tribute
Different Bridge Pickup
Neck Pickup
Aaron Marshall Signature USA Equinox vs Gibson 70s Tribute
Different Neck Pickup
Body Wood
Alder vs Mahogany
Different Body Wood
Neck Wood
Roasted Maple vs Mahogany
Different Neck Wood
Fretboard Wood
Roasted Maple vs Rosewood
Different Fretboard Wood
Headstock
7 vs 3-3
Different Headstock
Nut Material
Black Tusq XL vs Ivory Tusq
Different Nut Material

Shared Features
Schecter Aaron Marshall AM-7 USA vs Gibson 70s Flying V

Body Type
Solid Body
Feedback free
Tone Knobs
1
Same tone control
Pickups
HH
High output without hum
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium Jumbo
You'll feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Schecter Aaron Marshall AM-7 USA Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Hand Size Comfortability

And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter Aaron Marshall AM-7 USA favors large hands more than the Gibson 70s Flying V.

Schecter Aaron Marshall AM-7 USA:
Big Hands
Small Hands
Gibson 70s Flying V:
Big Hands
Small Hands

Beginner Friendliness

The Schecter Aaron Marshall AM-7 USA meets 5 out of our 8 criteria items for beginner friendliness, while the Gibson 70s Flying V meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Schecter Aaron Marshall AM-7 USA
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Comfortable neck
  • Comfortable fretboard
  • Narrow nut
  • Short scale

New Player Friendliness

Gibson 70s Flying V
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Schecter Aaron Marshall AM-7 USA

Roasted Maple wood pattern used for guitar building
Roasted Maple
Alder wood pattern used for guitar building
Alder

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Woods Used in the Gibson 70s Flying V

Mahogany wood pattern used for guitar building
Mahogany
Rosewood wood pattern used for guitar building
Rosewood

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Winner: Gibson 70s Flying V.

Pickup Configuration

Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Gibson 70s Flying V has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

Winner: Gibson 70s Flying V.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Schecter Aaron Marshall AM-7 USA gives you 5 switch options while the Gibson 70s Flying V gives you 3. This means that the Schecter Aaron Marshall AM-7 USA gives you more options to find the right pickup combination for the type of sound you want to achieve

Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Schecter Aaron Marshall AM-7 USA.

Final Sound Quality Scores

Schecter Aaron Marshall AM-7 USA
Pickups 85
Sustain 75
Versatility 62
Tuning Stability 80
Sound 76
Gibson 70s Flying V
Pickups 90
Sustain 75
Versatility 51
Tuning Stability 70
Sound 72

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Aaron Marshall AM-7 USA compares to the Gibson 70s Flying V.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Schecter Aaron Marshall AM-7 USA has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

On the other hand, the Gibson 70s Flying V comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

In this comparison, the Schecter Aaron Marshall AM-7 USA is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

Winner: Schecter Aaron Marshall AM-7 USA.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Schecter Aaron Marshall AM-7 USA has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Winner: Schecter Aaron Marshall AM-7 USA.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Schecter Aaron Marshall AM-7 USA has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

On the other hand, the Gibson 70s Flying V comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.

Winner: Schecter Aaron Marshall AM-7 USA.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Schecter Aaron Marshall AM-7 USA
  • Stainless Steel Frets
  • Locking Tuners
  • Made in United States
  • Black Tusq XL Nut
  • Top Brand Pickups
  • Luminescent Inlay
  • No Expensive Woods
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Gibson 70s Flying V
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Neck-Through Build
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Schecter Aaron Marshall AM-7 USA
Quality of materials 81
Features 65
Quality Control 100
Build Quality 82
Gibson 70s Flying V
Quality of materials 66
Features 50
Quality Control 90
Build Quality 69

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Schecter Aaron Marshall AM-7 USA Nut Width
Schecter Aaron Marshall AM-7 USA Nut Width
Gibson 70s Flying V Nut Width
Gibson 70s Flying V Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Schecter Aaron Marshall AM-7 USA has the wider nut with 48mm (1.89'') vs 43mm (1.693''). This is a 5mm (0.197'') difference

This means that it will be more difficult to do bar chords on the Schecter Aaron Marshall AM-7 USA, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Schecter Aaron Marshall AM-7 USA's Scale Length
Schecter Aaron Marshall AM-7 USA's Scale Length
Gibson 70s Flying V's Scale Length
Gibson 70s Flying V's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Schecter Aaron Marshall AM-7 USA has the longest scale: 26.5". The Gibson 70s Flying V is only 24.75" long. This is a 1.75'' (44.4mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Schecter Aaron Marshall AM-7 USA Neck Profile
Schecter Aaron Marshall AM-7 USA's neck profile
Gibson 70s Flying V Neck Profile
Gibson 70s Flying V's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Schecter Aaron Marshall AM-7 USA and the Gibson 70s Flying V have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Schecter Aaron Marshall AM-7 USA Fingerboard Radius
Schecter Aaron Marshall AM-7 USA's Fingerboard radius
Gibson 70s Flying V Fingerboard Radius
Gibson 70s Flying V's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Gibson 70s Flying V's fingerboard radius is smaller, which means it's more curved than the Schecter Aaron Marshall AM-7 USA's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Aaron Marshall AM-7 USA.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Fret Size

Schecter Aaron Marshall AM-7 USA and Gibson 70s Flying V Frets Size
Both have a similar Medium Jumbo fret size

Both have a Medium Jumbo fret size. These are slightly shorter than full Jumbo frets, so you'll still feel the fretboard when pressing down the strings. However, they interfere less with your fretting hand than medium-size frets. This is a good size if you like easy-to-press frets, but would still like to feel a bit of the fretboard when playing.

Final Playability Scores

Schecter Aaron Marshall AM-7 USA
Bending & Vibrato Ease 75
Chord Playability 60
Solo Playability 80
Playability 72
Gibson 70s Flying V
Bending & Vibrato Ease 85
Chord Playability 65
Solo Playability 70
Playability 73