Show Full Spec Comparison
| Schecter Aaron Marshall AM-7 USA | Fender American Original 70s Telecaster Custom | |
|---|---|---|
| General | ||
| Brand: | Schecter | Fender |
| Year: | 2024 | 2018 |
| Configuration: | HH | SH |
| Strings: | 7 | 6 |
| Made in: | United States | United States |
| Series: | Artist | American Original |
| Colors: | Red | Sunburst, Yellow, Natural |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Alder | Alder |
| Bridge: | Hipshot Ibby HM | 3-Saddle Vintage-Style Tele with Slotted Steel Saddles |
| Neck | ||
| Neck Joint: | Bolt-On | Bolt-On |
| Tuners: | Custom Aaron Marshall Hipshot Locking | Fender® Vintage F Stamped |
| Fretboard: | Quartersawn Roasted Maple | Maple |
| Neck Material: | Quartersawn Roasted Maple | Maple |
| Decoration: | 3mm Shifted Offset Black Acrylic Dots | Black Dot |
| Scale Size: | 26.5" | 25.5" |
| Shape: | Custom Thin "C" | Medium C |
| Thickness: | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.84'' (21.3mm) | 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.9'' (22.9mm) |
| Frets: | 24 Medium Jumbo Stainless Steel | 21 Vintage Tall Nickel Silver |
| Fretboard Radius: | 16" | 9.5" |
| Nut: | Black Tusq XL | Bone |
| Nut Width: | 48mm (1.89'') | 42mm (1.654'') |
| Electronics | ||
| Bridge Pickups: | Aaron Marshall Signature USA Solstice (Humbucker / Passive) | Fender Vintage-Style 70s Single-Coil Tele (Single Coil / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Aaron Marshall Signature USA Equinox (Humbucker / Passive) | Fender Tim Shaw Authentic CuNiFe Wide-Range Humbucking (Humbucker / Passive) |
| Switch: | 5 Way | 3 Way |
| Knobs: | Dome | Bell |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 2 |
| Tone Controls: | 1 | 2 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Chrome |
Show Diagrams Comparison
Reasons to Get
Schecter Aaron Marshall AM-7 USA over Fender American Original 70s Telecaster Custom
Reasons to Get
Fender American Original 70s Telecaster Custom over Schecter Aaron Marshall AM-7 USA
Other Key Differences
Schecter Aaron Marshall AM-7 USA vs Fender American Original 70s Telecaster Custom
Shared Features
Schecter Aaron Marshall AM-7 USA vs Fender American Original 70s Telecaster Custom
Common Strengths
- High-Quality Nut
- From a High-Quality-Standards Country
- Top Pickup Brand
Common Weaknesses
- Neck-Through Build
- Pickup Alter Switch/Knob
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Strap Lock
- Expensive Wood
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Schecter Aaron Marshall AM-7 USA favors large hands more than the Fender American Original 70s Telecaster Custom.
Schecter Aaron Marshall AM-7 USA:
Fender American Original 70s Telecaster Custom:
Beginner Friendliness
The Fender American Original 70s Telecaster Custom meets 6 out of our 8 criteria items for beginner friendliness, while the Schecter Aaron Marshall AM-7 USA meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Schecter Aaron Marshall AM-7 USA- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Fender American Original 70s Telecaster Custom- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Schecter Aaron Marshall AM-7 USA
Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.
Woods Used in the Fender American Original 70s Telecaster Custom
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Winner: Tie.
Pickup Configuration
The Schecter Aaron Marshall AM-7 USA has an HH configuration while the Fender American Original 70s Telecaster Custom has SH pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, SH is a more versatile version of the classic telecaster (SS) configuration. The bridge pickup usually produces a bright and twangy tone, while the neck Humbucker gives you the warmer tone you'll need for more Jazzy/Bluish solos and chords.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender American Original 70s Telecaster Custom has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender American Original 70s Telecaster Custom.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Schecter Aaron Marshall AM-7 USA gives you 5 switch options while the Fender American Original 70s Telecaster Custom gives you 3. This means that the Schecter Aaron Marshall AM-7 USA gives you more options to find the right pickup combination for the type of sound you want to achieve
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter Aaron Marshall AM-7 USA.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Aaron Marshall AM-7 USA compares to the Fender American Original 70s Telecaster Custom.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Schecter Aaron Marshall AM-7 USA has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
On the other hand, the Fender American Original 70s Telecaster Custom comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter Aaron Marshall AM-7 USA is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter Aaron Marshall AM-7 USA.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Schecter Aaron Marshall AM-7 USA has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Schecter Aaron Marshall AM-7 USA.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Schecter Aaron Marshall AM-7 USA
- Stainless Steel Frets
- Locking Tuners
- Made in United States
- Black Tusq XL Nut
- Top Brand Pickups
- Luminescent Inlay
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Fender American Original 70s Telecaster Custom
- Made in United States
- Bone Nut
- Top Brand Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Expensive Woods
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Schecter Aaron Marshall AM-7 USA has the wider nut with 48mm (1.89'') vs 42mm (1.654''). This is a 6mm (0.236'') difference
This means that it will be more difficult to do bar chords on the Schecter Aaron Marshall AM-7 USA, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Schecter Aaron Marshall AM-7 USA has the longest scale: 26.5". The Fender American Original 70s Telecaster Custom is only 25.5" long. This is a 1'' (25.4mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Schecter Aaron Marshall AM-7 USA and the Fender American Original 70s Telecaster Custom have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Fender American Original 70s Telecaster Custom's fingerboard radius is smaller, which means it's more curved than the Schecter Aaron Marshall AM-7 USA's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Aaron Marshall AM-7 USA.
Fret Size
The Fender American Original 70s Telecaster Custom has Vintage Tall frets, which should be taller than the Schecter Aaron Marshall AM-7 USA's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
