Swap
Swap
Schecter Aaron Marshall AM-6 USA
Fender American Original 70s Telecaster Custom
VS
Playability
73
Sound
76
Build
84
Value
63
Score
78
FIND IT ON:
Sweetwater logoMusician's Friend logo
Playability
68
Sound
73
Build
67
Value
64
Score
69
FIND IT ON:
Sweetwater logoMusician's Friend logo
Add to Compare
Add to Compare
Add more to comparison
Show Full Spec Comparison
Schecter Aaron Marshall AM-6 USA vs Fender American Original 70s Telecaster Custom Specs Comparison
Schecter Aaron Marshall AM-6 USA Fender American Original 70s Telecaster Custom
General
Brand: Schecter Fender
Year: 2024 2018
Configuration: HH SH
Strings: 6 6
Made in: United States United States
Series: Artist American Original
Colors: Blue Sunburst, Yellow, Natural
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Alder Alder
Bridge: Schecter Gotoh 510 Tremolo 3-Saddle Vintage-Style Tele with Slotted Steel Saddles
Neck
Neck Joint: Bolt-On Bolt-On
Tuners: Custom Aaron Marshall Hipshot Locking Fender® Vintage F Stamped
Fretboard: Quartersawn Roasted Maple Maple
Neck Material: Quartersawn Roasted Maple Maple
Decoration: 3mm Shifted Offset Black Acrylic Dots Black Dot
Scale Size: 25.5" 25.5"
Shape: Custom Thin "C" Medium C
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.84'' (21.3mm) 1st Fret: 0.82'' (20.8mm) - 12th Fret: 0.9'' (22.9mm)
Frets: 24 Medium Jumbo Stainless Steel 21 Vintage Tall Nickel Silver
Fretboard Radius: 16" 9.5"
Nut: Black Tusq XL Bone
Nut Width: 42.4mm (1.67'') 42mm (1.654'')
Electronics
Bridge Pickups: Aaron Marshall Signature USA Solstice (Humbucker / Passive) Fender Vintage-Style 70s Single-Coil Tele (Single Coil / Passive)
Middle Pickup:
Neck Pickup: Aaron Marshall Signature USA Equinox (Humbucker / Passive) Fender Tim Shaw Authentic CuNiFe Wide-Range Humbucking (Humbucker / Passive)
Switch: 5 Way 3 Way
Knobs: Dome Bell
Pickup Mods: None None
Volume Controls: 1 2
Tone Controls: 1 2
Hardware
Strap Lock: No No
Hardware Color: Black Chrome
Show Diagrams Comparison
Schecter Aaron Marshall AM-6 USA pickups switch selector and push knobs diagram
Schecter Aaron Marshall AM-6 USA's switch options
Fender American Original 70s Telecaster Custom pickups switch and push knobs diagram
Fender American Original 70s Telecaster Custom's switch options

Reasons to Get
Schecter Aaron Marshall AM-6 USA over Fender American Original 70s Telecaster Custom

Fret Material
Stainless Steel vs Nickel Silver
Best fret material that will last forever
Release Year
2024 vs 2018
From a more recent year
Switch Positions
5 vs 3
More tone options
Pickups
HH vs SH
High output without hum
Number of Frets
24 vs 21
Allows to reach higher notes
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.82'' (20.8mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.84'' (21.3mm) vs 0.9'' (22.9mm)
More comfortable at higher frets for small hands
Nut Width
1.67'' (42.4mm) vs 1.654'' (42mm)
Less likely to mute strings by accident and more space for fingerstyle
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Fretboard Radius
16'' (406.4mm) vs 9.5'' (241.3mm)
Flatter fretboard makes it easier to play single notes and bend

Reasons to Get
Fender American Original 70s Telecaster Custom over Schecter Aaron Marshall AM-6 USA

Number of Frets
21 vs 24
Warmer neck pickup
Frets Height
Taller vs Shorter
Easier to press down strings and bend them
Volume Knobs
2 vs 1
More volume control
Tone Knobs
2 vs 1
More tone control
Pickups
SH vs HH
Very bright bridge tone and a very warm neck pickup
Neck Thickness at 1st Fret
0.82'' (20.8mm) vs 0.79'' (20.1mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.9'' (22.9mm) vs 0.84'' (21.3mm)
More comfortable at higher frets for big hands
Nut Width
1.654'' (42mm) vs 1.67'' (42.4mm)
Favors small hands, easier bar chords and other shapes
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Fretboard Radius
9.5'' (241.3mm) vs 16'' (406.4mm)
Easier to play chords without muting strings
Value Score
64 vs 63
Better price/quality relationship

Other Key Differences
Schecter Aaron Marshall AM-6 USA vs Fender American Original 70s Telecaster Custom

Bridge Pickup
Aaron Marshall Signature USA Solstice vs Fender Vintage-Style 70s Single-Coil Tele
Different Bridge Pickup
Neck Pickup
Aaron Marshall Signature USA Equinox vs Fender Tim Shaw Authentic CuNiFe Wide-Range Humbucking
Different Neck Pickup
Neck Wood
Roasted Maple vs Maple
Different Neck Wood
Fretboard Wood
Roasted Maple vs Maple
Different Fretboard Wood
Nut Material
Black Tusq XL vs Bone
Different Nut Material

Shared Features
Schecter Aaron Marshall AM-6 USA vs Fender American Original 70s Telecaster Custom

Body Wood
Alder
Same Body Wood
Headstock
6
Same Headstock
Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Pickups Power
Passive
Cleaner sound and no battery needed
Neck Profile Type
C
Comfortable neck that works for most people
Neck Joint
Bolt-On
Allows you to detach and swap the neck
Type of Frets
Medium Jumbo vs Vintage Tall
You'll feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Top Pickup Brand

Common Weaknesses

  • Neck-Through Build
  • Pickup Alter Switch/Knob
  • Weight Relief
  • Stays in Tune (Evertune)
  • Compound Radius Fretboard
  • Strap Lock
  • Expensive Wood
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Price History Comparison

Schecter Aaron Marshall AM-6 USA Prices

SET PRICE ALERT

Fender American Original 70s Telecaster Custom Prices

    SET PRICE ALERT

    These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

    Hand Size Comfortability

    And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender American Original 70s Telecaster Custom favors large hands more than the Schecter Aaron Marshall AM-6 USA. But it's still more comfortable for people with small hands, as you can see in the score meter below.

    Schecter Aaron Marshall AM-6 USA:
    Big Hands
    Small Hands
    Fender American Original 70s Telecaster Custom:
    Big Hands
    Small Hands

    Beginner Friendliness

    Both meet 6 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

    New Player Friendliness

    Schecter Aaron Marshall AM-6 USA
    • Comfortable shape
    • Easy-to-use bridge
    • Locking tuners
    • Tall frets
    • Narrow nut
    • Comfortable neck
    • Comfortable fretboard
    • Short scale

    New Player Friendliness

    Fender American Original 70s Telecaster Custom
    • Comfortable shape
    • Easy-to-use bridge
    • Comfortable fretboard
    • Tall frets
    • Narrow nut
    • Comfortable neck
    • Short scale
    • Locking tuners

    Sound Quality Comparison

    The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

    Woods Used in Both

    Alder wood pattern used for guitar building
    Alder

    Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

    Woods Used in the Schecter Aaron Marshall AM-6 USA

    Roasted Maple wood pattern used for guitar building
    Roasted Maple

    Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

    Woods Used in the Fender American Original 70s Telecaster Custom

    Maple wood pattern used for guitar building
    Maple

    Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

    Winner: Tie.

    Pickup Configuration

    The Schecter Aaron Marshall AM-6 USA has an HH configuration while the Fender American Original 70s Telecaster Custom has SH pickups.

    Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

    On the other hand, SH is a more versatile version of the classic telecaster (SS) configuration. The bridge pickup usually produces a bright and twangy tone, while the neck Humbucker gives you the warmer tone you'll need for more Jazzy/Bluish solos and chords.

    Pickups Quality

    Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

    However, the Fender American Original 70s Telecaster Custom has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

    Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.

    Winner: Fender American Original 70s Telecaster Custom.

    Versatility Comparison

    Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

    Switch Options

    The Schecter Aaron Marshall AM-6 USA gives you 5 switch options while the Fender American Original 70s Telecaster Custom gives you 3. This means that the Schecter Aaron Marshall AM-6 USA gives you more options to find the right pickup combination for the type of sound you want to achieve

    Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.

    When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

    Winner: Schecter Aaron Marshall AM-6 USA.

    Final Sound Quality Scores

    Schecter Aaron Marshall AM-6 USA
    Pickups 85
    Sustain 70
    Versatility 72
    Tuning Stability 75
    Sound 76
    Fender American Original 70s Telecaster Custom
    Pickups 90
    Sustain 75
    Versatility 58
    Tuning Stability 70
    Sound 73

    Build Quality Comparison

    When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Schecter Aaron Marshall AM-6 USA compares to the Fender American Original 70s Telecaster Custom.

    Country of Origin

    The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.

    The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

    Winner: Tie

    Nut Material

    If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

    The Schecter Aaron Marshall AM-6 USA has a Black Tusq XL nut. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).

    On the other hand, the Fender American Original 70s Telecaster Custom comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

    Winner: Tie.

    Fret Material

    Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

    In this comparison, the Schecter Aaron Marshall AM-6 USA is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.

    Winner: Schecter Aaron Marshall AM-6 USA.

    Bridge

    The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

    The Schecter Aaron Marshall AM-6 USA's brige is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

    On the other hand, the Fender American Original 70s Telecaster Custom's is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

    Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

    Winner: Tie.

    Tuners

    The Schecter Aaron Marshall AM-6 USA has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

    Winner: Schecter Aaron Marshall AM-6 USA.

    Neck Joint

    Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

    Both have a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

    Winner: Tie.

    Here is the list of features that were considered when choosing the winner in the Features subcategory:

    Strengths & Weaknesses
    Schecter Aaron Marshall AM-6 USA
    • Stainless Steel Frets
    • Locking Tuners
    • Made in United States
    • Black Tusq XL Nut
    • Top Brand Pickups
    • Luminescent Inlay
    • Tremolo
    • No Expensive Woods
    • No Neck-Through Build
    • No Push Knob or Extra Switch Option
    • No Weight Relief
    • No Compound Radius Fretboard
    • No 21:1 Tuner Ratio
    • No Strap Lock
    Strengths & Weaknesses
    Fender American Original 70s Telecaster Custom
    • Made in United States
    • Bone Nut
    • Top Brand Pickups
    • Cheap Fret Wire (NS)
    • No Locking Tuners
    • No Expensive Woods
    • No Neck-Through Build
    • No Push Knob or Extra Switch Option
    • No Weight Relief
    • No Luminescent Inlay
    • No Tremolo
    • No Compound Radius Fretboard
    • No 21:1 Tuner Ratio
    • No Strap Lock

    Final Build Quality Scores

    Schecter Aaron Marshall AM-6 USA
    Quality of materials 81
    Features 70
    Quality Control 100
    Build Quality 84
    Fender American Original 70s Telecaster Custom
    Quality of materials 61
    Features 50
    Quality Control 90
    Build Quality 67

    Playability Comparison

    Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

    Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

    Nut Width

    Schecter Aaron Marshall AM-6 USA Nut Width
    Schecter Aaron Marshall AM-6 USA Nut Width
    Fender American Original 70s Telecaster Custom Nut Width
    Fender American Original 70s Telecaster Custom Nut Width

    The nut width will affect the separation between strings at the nut. In this comparison, the Schecter Aaron Marshall AM-6 USA has the wider nut with 42.4mm (1.67'') vs 42mm (1.654''). This is a 0.4mm (0.016'') difference

    This means that it will be more difficult to do bar chords on the Schecter Aaron Marshall AM-6 USA, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

    Scale Length

    Schecter Aaron Marshall AM-6 USA and Fender American Original 70s Telecaster Custom's Scale Length
    Both have the same scale length

    The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

    In this case, both have a scale length of 25.5".

    This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

    However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

    Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

    Neck Profile

    Schecter Aaron Marshall AM-6 USA Neck Profile
    Schecter Aaron Marshall AM-6 USA's neck profile
    Fender American Original 70s Telecaster Custom Neck Profile
    Fender American Original 70s Telecaster Custom's neck profile

    No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

    Both the Schecter Aaron Marshall AM-6 USA and the Fender American Original 70s Telecaster Custom have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

    Fretboard Radius

    Schecter Aaron Marshall AM-6 USA Fingerboard Radius
    Schecter Aaron Marshall AM-6 USA's Fingerboard radius
    Fender American Original 70s Telecaster Custom Fingerboard Radius
    Fender American Original 70s Telecaster Custom's Fingerboard radius

    Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

    In this case, the Fender American Original 70s Telecaster Custom's fingerboard radius is smaller, which means it's more curved than the Schecter Aaron Marshall AM-6 USA's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Schecter Aaron Marshall AM-6 USA.

    Fret Size

    Schecter Aaron Marshall AM-6 USA Frets Size
    Schecter Aaron Marshall AM-6 USA's Frets Size
    Fender American Original 70s Telecaster Custom Frets Size
    Fender American Original 70s Telecaster Custom's Frets Size

    The Fender American Original 70s Telecaster Custom has Vintage Tall frets, which should be taller than the Schecter Aaron Marshall AM-6 USA's Medium Jumbo frets.

    Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.

    Final Playability Scores

    Schecter Aaron Marshall AM-6 USA
    Bending & Vibrato Ease 70
    Chord Playability 70
    Solo Playability 80
    Playability 73
    Fender American Original 70s Telecaster Custom
    Bending & Vibrato Ease 65
    Chord Playability 80
    Solo Playability 60
    Playability 68