Swap
Swap
Martin GPC-16E
Taylor 314ce-N
VS
Playability
73
Sound
88
Build
86
Value
77
Score
82
FIND IT ON:
Sweetwater logoMusician's Friend logoAmazon logo
Playability
73
Sound
88
Build
84
Value
72
Score
82
FIND IT ON:
Sweetwater logo
Add more to comparison

Martin GPC-16E vs Taylor 314ce-N

Reasons to Get
Martin GPC-16E over Taylor 314ce-N

Release Year
2017 vs 2012
From a more recent year
Pickups Brand
Fishman vs None
Pickups from a renown brand
Nut Width
1.75'' (44.5mm) vs 1.875'' (47.6mm)
Favors small hands, easier bar chords and other shapes
Scale Length
25.4'' (645.2mm) vs 25.5'' (647.7mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
16'' (406.4mm) vs 15'' (381mm)
Flatter fretboard makes it easier to play single notes and bend
Value Score
77 vs 72
Better price/quality relationship

Reasons to Get
Taylor 314ce-N over Martin GPC-16E

Nut Width
1.875'' (47.6mm) vs 1.75'' (44.5mm)
Less likely to mute strings by accident and more space for fingerstyle
Scale Length
25.5'' (647.7mm) vs 25.4'' (645.2mm)
Lower action and brighter natural tone
Fretboard Radius
15'' (381mm) vs 16'' (406.4mm)
More curved fretboard helpful to play chords without muting strings
Avg. Weight
4lbs (1.8kgs) vs 4.15lbs (1.9kgs)
Tends to be lighter

Other Key Differences
Martin GPC-16E vs Taylor 314ce-N

Back Material
Rosewood vs Sapele
Different Back Material
Sides Material
Rosewood vs Sapele
Different Sides Material
Saddle Material
Ivory Tusq vs Synthetic Bone
Different Saddle Material
Bridge Material
Ebony vs West African Crelicam Ebony
Different Bridge Material
Neck Wood
Hardwood vs Mahogany
Different Neck Wood
Nut Material
Bone vs Ivory Tusq
Different Nut Material

Shared Features
Martin GPC-16E vs Taylor 314ce-N

Body Wood
Spruce
Same Body Wood
Fretboard Wood
Ebony
Same Fretboard Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • High-Quality Nut
  • From a High-Quality-Standards Country
  • Expensive Wood

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT

Taylor 314ce-N Prices

SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 82 out of 100, which makes them similar in terms of quality.

The Taylor 314ce-N wins when it comes to. On the other hand, the Martin GPC-16E has the upper hand when it comes to build quality, value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Taylor 314ce-N is the better choice.

The Taylor 314ce-N meets 4 out of our 8 criteria items for beginner friendliness, while the Martin GPC-16E meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Martin GPC-16E
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Taylor 314ce-N
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Soft Strings
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Martin GPC-16E Overview

  • From Martin's 2017 16-17 series
  • Made in United States
  • 6 strings
  • 25.4"'' scale
  • 16" Fretboard Radius
  • Solid Spruce top
  • Solid East Indian Rosewood back
  • Solid East Indian Rosewood sides
  • Select Hardwood neck
  • Ebony fretboard
  • Bridge pickup: Fishman Matrix VT Enhance NT2 (Preamp/Active)
  • Ebony bridge
  • Acoustic Modified Low Oval Set neck
  • 20 Medium frets
  • Nickel Open Gear tuners
  • Weight between 3.85lbs (1.7kgs) and 4.45lbs (2kgs)
  • Compare Specs >

Taylor 314ce-N Overview

  • From Taylor's 2012 300 series
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 15" Fretboard Radius
  • Solid Sitka Spruce top
  • Solid Sapele back
  • Solid Sapele sides
  • Tropical Mahogany neck
  • West African Crelicam Ebony fretboard
  • Bridge pickup: ES-N Electronics (Preamp/Active)
  • West African Crelicam Ebony bridge
  • Acoustic Taylor Standard Set neck
  • 20 Medium frets
  • Classical Nickel tuners
  • Weight around 4lbs (1.8kgs)
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Ebony wood pattern used for guitar building
Ebony
Spruce wood pattern used for guitar building
Spruce

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Woods Used in the Martin GPC-16E

Hardwood wood pattern used for guitar building
Hardwood
Rosewood wood pattern used for guitar building
Rosewood

Hardwood is just a generic wood that can come from many species. This type of wood is used to build guitars because it provides a rich, warm sound. The wood also has good structural properties, making it durable and long-lasting.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Woods Used in the Taylor 314ce-N

Mahogany wood pattern used for guitar building
Mahogany
Sapele wood pattern used for guitar building
Sapele

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.

Winner: Tie.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Martin GPC-16E
Sustain 95
Versatility 85
Tuning Stability 70
Sound 88
Taylor 314ce-N
Sustain 95
Versatility 85
Tuning Stability 70
Sound 88

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Martin GPC-16E compares to the Taylor 314ce-N.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Martin GPC-16E has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Taylor 314ce-N comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Martin GPC-16E's are Nickel Open Gear while the Taylor 314ce-N's are Classical Nickel

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Martin GPC-16E
  • Made in United States
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Electronics
  • Ivory Tusq Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Taylor 314ce-N
  • Made in United States
  • Expensive Wood
  • Ivory Tusq Nut
  • Electronics
  • Synthetic Bone Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Top Brand Pickups
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Martin GPC-16E
Quality of materials 84
Features 85
Quality Control 90
Build Quality 86
Taylor 314ce-N
Quality of materials 81
Features 75
Quality Control 95
Build Quality 84

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Martin GPC-16E Nut Width
Martin GPC-16E Nut Width
Taylor 314ce-N Nut Width
Taylor 314ce-N Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Taylor 314ce-N has the wider nut with 47.6mm (1.875'') vs 44.5mm (1.75''). This is a 3.1mm (0.125'') difference

This means that it will be more difficult to do bar chords on the Taylor 314ce-N, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Martin GPC-16E's Scale Length
Martin GPC-16E's Scale Length
Taylor 314ce-N's Scale Length
Taylor 314ce-N's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Taylor 314ce-N has the longest scale: 25.5". The Martin GPC-16E is only 25.4" long. This is a 0.1'' (2.5mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Martin GPC-16E Neck Profile
Martin GPC-16E's neck profile
Taylor 314ce-N Neck Profile
Taylor 314ce-N's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Martin GPC-16E and the Taylor 314ce-N have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Martin GPC-16E Fingerboard Radius
Martin GPC-16E's Fingerboard radius
Taylor 314ce-N Fingerboard Radius
Taylor 314ce-N's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Taylor 314ce-N's fingerboard radius is smaller, which means it's more curved than the Martin GPC-16E's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Martin GPC-16E.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Martin GPC-16E:
Big Hands
Small Hands
Taylor 314ce-N:
Big Hands
Small Hands

Fret Size

Martin GPC-16E and Taylor 314ce-N Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Martin GPC-16E
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73
Taylor 314ce-N
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73

Specs Side-by-Side

Martin GPC-16E vs Taylor 314ce-N
General Martin GPC-16E Taylor 314ce-N
Brand: Martin Taylor
Year: 2017 2012
Strings: 6 6
Made in: United States United States
Series: 16-17 300
Colors: Natural Natural
Left-Handed Version: Yes Yes
Body
Type: Hollowbody Hollowbody
Body Material: Solid Spruce Solid Sitka Spruce
Sides Material: Rosewood Sapele
Back Material: Rosewood Sapele
Bridge: Ebony West African Crelicam Ebony
Neck
Neck Joint: Set Set
Tuners: Nickel Open Gear Classical Nickel
Fretboard: Ebony West African Crelicam Ebony
Neck Material: Select Hardwood Tropical Mahogany
Decoration: Mother-of-Pearl Style 28 Gemstone, Italian Acrylic
Scale Size: 25.4" 25.5"
Shape: Acoustic Modified Low Oval Acoustic Taylor Standard
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 16" 15"
Nut: Bone Ivory Tusq
Nut Width: 44.5mm (1.75'') 47.6mm (1.875'')
Electronics
Bridge Pickup: Fishman Matrix VT Enhance NT2 (Preamp / Active) ES-N Electronics (Preamp / Active)