Martin D-13E vs D-X2E
Reasons to Get
Martin D-13E over D-X2E
Reasons to Get
Martin D-X2E over D-13E
Other Key Differences
Martin D-13E vs D-X2E
Shared Features
Martin D-13E vs D-X2E
Common Strengths
- Solid Top Wood
- High-Quality Nut
- Top Pickup Brand
Common Weaknesses
- Solid Side Wood
- Solid Back Wood
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Luminescent Sidedots
- Strap Lock
- Expensive Wood
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Martin D-13E is probably the better product overall with its final score of 77 compared to the Martin D-X2E's 76 score, although not by a lot.
The Martin D-13E wins when it comes to build quality. On the other hand, the Martin D-X2E has the upper hand when it comes to value for the money.
If you got small hands, none of these instruments will make a big difference when it comes to comfortability.
Which One is Better for Beginners?
Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Martin D-13E- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
New Player Friendliness
Martin D-X2E- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable shape
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Martin D-13E Overview
- From Martin's 2019 Road series
- Made in Mexico
- 6 strings
- 25.4"'' scale
- 16" Fretboard Radius
- Solid Spruce top
- Ziricote Fine Veneer back
- Ziricote Fine Veneer sides
- Select Hardwood neck
- FSC Certified Richlite fretboard
- Bridge pickup: Fishman MX-T (Preamp/Active)
- FSC Certified Richlite bridge
- Acoustic Performing Artist Set neck
- 20 Medium frets
- Chrome Enclosed Gear tuners
- Compare Specs >
Martin D-X2E Overview
- From Martin's 2020 X series
- Made in Mexico
- 6 strings
- 25.4"'' scale
- 16" Fretboard Radius
- Solid Spruce top
- HPL back
- HPL sides
- Select Hardwood neck
- Katalox fretboard
- Bridge pickup: Fishman MX (Preamp/Active)
- Katalox bridge
- Acoustic Performing Artist Set neck
- 20 Medium frets
- Chrome Enclosed Gear tuners
- Weight between 4.6lbs (2.1kgs) and 4.8lbs (2.2kgs)
- Compare Specs >
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Hardwood is just a generic wood that can come from many species. This type of wood is used to build guitars because it provides a rich, warm sound. The wood also has good structural properties, making it durable and long-lasting.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Woods Used in the Martin D-13E
It's very similar to Ebony, but it is much cheaper to make. The main reason is that it is made from resin-infused paper. It is very durable and soft, so it's often used for fretboards and tops.
It's a rare and exotic wood native to Central America and the Caribbean with a unique appearance. It's commonly used for instruments as it produces a tone similar to Rosewood.
Woods Used in the Martin D-X2E
Katalox is a type of wood that is native to Mexico and parts of Central America. It is a hardwood that is known for its strength and durability. It's tone is well balanced across all frequencies.
HPL is a high-pressure laminate made from multiple layers of paper or fabric that are impregnated with resin and then fused together under high pressure and heat.
Winner: Tie.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Martin D-13E compares to the Martin D-X2E.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Mexico.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Corian nuts. It used to be the go-to nut for Gibson, but it's slowly being replaced by Graph Tech (Tusq). It's a synthetic material made to be similar to Bone, but it doesn't have the same self-lubricating properties, and it's less resistant.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. Both come with Chrome Enclosed Gear.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Martin D-13E
- Top Brand Pickups
- Electronics
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Expensive Woods
- No High-Quality Nut
- Low-Quality Material Saddle
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Martin D-X2E
- Top Brand Pickups
- Electronics
- Solid Top Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Expensive Woods
- No High-Quality Nut
- Low-Quality Material Saddle
- Laminated Side Wood
- Laminated Back Wood
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 44.5mm (1.75'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.4".
This is considered a long scale, but slightly shorter than what's commonly found in acoustic guitars.
Since the distance between bridge and nut is relatively long, strings will feel stiff and more difficult to bend, but the tone will feel brighter. It will also be less likely to produce fret buzzing and rattling when strumming hard.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Martin D-13E and the Martin D-X2E have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Martin D-13E and the Martin D-X2E have the same fretboard radius of 16". This fretboard radius is really different from Stratocasters, but it's also a lot flatter than Les Paul fingerboards. It'll favor plating single notes over playing chords. This doesn't mean you can't use it for rhythm, but a more curved fretboard offers better playability for chords. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .
Martin D-13E:
Martin D-X2E:
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
