Show Full Spec Comparison
| Martin 000JR-10E Shawn Mendes | 0-18 | |
|---|---|---|
| General | ||
| Brand: | Martin | Martin |
| Year: | 2022 | 1898 |
| Strings: | 6 | 6 |
| Made in: | Mexico | United States |
| Series: | Custom & Special Editions | Standard |
| Colors: | Natural | Natural |
| Left-Handed Version: | No | Yes |
| Body | ||
| Type: | Hollowbody | Hollowbody |
| Body Material: | Solid Spruce | Solid Spruce |
| Sides Material: | Sapele | Mahogany |
| Back Material: | Sapele | Mahogany |
| Bridge: | FSC Certified Ebony | Ebony |
| Neck | ||
| Neck Joint: | Set | Set |
| Tuners: | Chrome Enclosed Gear | Nickel Open Gear |
| Fretboard: | FSC Certified Ebony | Ebony |
| Neck Material: | FSC Certified Sipo | Select Hardwood |
| Decoration: | MOP Pattern Custom Shawn Mendes (MOP Pattern) | Abalone Old Style 18 |
| Scale Size: | 24" | 24.9" |
| Shape: | Acoustic Junior | Acoustic Modified Low Oval |
| Frets: | 20 Medium Nickel Silver | 20 Medium Nickel Silver |
| Fretboard Radius: | 16" | 16" |
| Nut: | Ivory Tusq | Bone |
| Nut Width: | 44.5mm (1.75'') | 44.5mm (1.75'') |
| Electronics | ||
| Pickups: | Fishman Sonitone (Preamp / Active) | Fishman Gold Plus Natural I (Preamp / Active) |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Nickel |
Reasons to Get
Martin 000JR-10E Shawn Mendes over 0-18
Reasons to Get
Martin 0-18 over 000JR-10E Shawn Mendes
Other Key Differences
Martin 000JR-10E Shawn Mendes vs 0-18
Shared Features
Martin 000JR-10E Shawn Mendes vs 0-18
Common Strengths
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- High-Quality Nut
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Pickup Alter Switch/Knob
- Locking Tuners
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Martin 000JR-10E Shawn Mendes:
Martin 0-18:
Beginner Friendliness
The Martin 000JR-10E Shawn Mendes meets 5 out of our 8 criteria items for beginner friendliness, while the Martin 0-18 meets only 4. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Martin 000JR-10E Shawn Mendes- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Short scale
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Soft Strings
- Locking tuners
New Player Friendliness
Martin 0-18- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Soft Strings
- Locking tuners
Sound Quality Comparison
The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .
Woods Used in Both
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.
Woods Used in the Martin 000JR-10E Shawn Mendes
Sipo wood is a type of hardwood that is native to Africa. Regarding its tonal properties, the low end is full and rich, while the highs are clear and articulate. This makes for a very well-rounded sound that is perfect for any style of music.
It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.
Woods Used in the Martin 0-18
Hardwood is just a generic wood that can come from many species. This type of wood is used to build guitars because it provides a rich, warm sound. The wood also has good structural properties, making it durable and long-lasting.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Winner: Martin 0-18.
Electronics
Both come with electronics that allow you connect them to an amplifier or interface for recording.
Winner:Tie.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Martin 000JR-10E Shawn Mendes compares to the Martin 0-18.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Martin 000JR-10E Shawn Mendes is built in Mexico while the Martin 0-18 is made in United States.
Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Martin 0-18
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Martin 000JR-10E Shawn Mendes has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Martin 0-18 comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Tuners
Both come with regular tuners. The Martin 000JR-10E Shawn Mendes's are Chrome Enclosed Gear while the Martin 0-18's are Nickel Open Gear
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Martin 000JR-10E Shawn Mendes
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Electronics
- Ivory Tusq Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Mexico
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Martin 0-18
- Made in United States
- Expensive Wood
- Bone Nut
- Top Brand Pickups
- Electronics
- Compensated Saddle
- Solid Top Wood
- Solid Side Wood
- Solid Back Wood
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 44.5mm (1.75'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Martin 0-18 has the longest scale: 24.9". The Martin 000JR-10E Shawn Mendes is only 24" long. This is a 0.9'' (22.9mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Martin 000JR-10E Shawn Mendes and the Martin 0-18 have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Martin 000JR-10E Shawn Mendes and the Martin 0-18 have the same fretboard radius of 16". This fretboard radius is really different from Stratocasters, but it's also a lot flatter than Les Paul fingerboards. It'll favor plating single notes over playing chords. This doesn't mean you can't use it for rhythm, but a more curved fretboard offers better playability for chords. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
