Swap
Swap
Martin 000-15M StreetMaster
Yamaha LL-TA
VS
Playability
73
Sound
86
Build
85
Value
76
Score
81
FIND IT ON:
Sweetwater logoAmazon logoMusician's Friend logo
Playability
73
Sound
88
Build
72
Value
78
Score
78
FIND IT ON:
Amazon logoSweetwater logoMusician's Friend logo
Add more to comparison

Martin 000-15M StreetMaster vs Yamaha LL-TA

Reasons to Get
Martin 000-15M StreetMaster over Yamaha LL-TA

Country of Manufacturing
United States vs China
Built with higher quality standards
Release Year
2017 vs 2016
From a more recent year
Pickups Brand
Fishman vs None
Pickups from a renown brand
Nut Material
Bone vs Plastic
Good quality nut with rich tone
Nut Width
1.688'' (42.9mm) vs 1.732'' (44mm)
Favors small hands, easier bar chords and other shapes
Body Shape
Auditorium vs Dreadnought
Narrower and shallower than a Dreadnought with less lower tones
Paint Finish
Aged vs Poly
Paint has been artificially aged
Scale Length
25.4'' (645.2mm) vs 25.6'' (650.2mm)
Easier bending, shorter fret separation and warmer natural tone
Fretboard Radius
16'' (406.4mm) vs 15.75'' (400.1mm)
Flatter fretboard makes it easier to play single notes and bend

Reasons to Get
Yamaha LL-TA over Martin 000-15M StreetMaster

Pickup Mods
Multi-Voicing vs None
Changes the voice (tones or gain) of the pickups
Nut Width
1.732'' (44mm) vs 1.688'' (42.9mm)
Less likely to mute strings by accident and more space for fingerstyle
Body Shape
Dreadnought vs Auditorium
Prominent low-end tones in a large body
Paint Finish
Poly vs Aged
Resistant paint that ages well
Scale Length
25.6'' (650.2mm) vs 25.4'' (645.2mm)
Lower action and brighter natural tone
Fretboard Radius
15.75'' (400.1mm) vs 16'' (406.4mm)
More curved fretboard helpful to play chords without muting strings
Value Score
78 vs 76
Better price/quality relationship

Other Key Differences
Martin 000-15M StreetMaster vs Yamaha LL-TA

Back Material
Mahogany vs Rosewood
Different Back Material
Sides Material
Mahogany vs Rosewood
Different Sides Material
Saddle Material
Compensated vs Plastic
Different Saddle Material
Bridge Material
Katalox vs Ebony
Different Bridge Material
Body Wood
Mahogany vs Spruce
Different Body Wood
Fretboard Wood
Katalox vs Ebony
Different Fretboard Wood
Nut Material
Bone vs Plastic
Different Nut Material

Shared Features
Martin 000-15M StreetMaster vs Yamaha LL-TA

Neck Wood
Mahogany
Same Neck Wood
Headstock
3-3
Same Headstock
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Bridge
Fixed
Good sustain and needs no set-up
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Expensive Wood

Common Weaknesses

  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • Luminescent Sidedots
  • Strap Lock
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Martin 000-15M StreetMaster is probably the better product overall with its final score of 81 compared to the Yamaha LL-TA's 78 score, although not by a lot.

The Martin 000-15M StreetMaster wins when it comes to build quality. On the other hand, the Yamaha LL-TA has the upper hand when it comes to sound, value for the money.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Martin 000-15M StreetMaster
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Yamaha LL-TA
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Martin 000-15M StreetMaster Overview

  • From Martin's 2017 15 series
  • Made in United States
  • 6 strings
  • 25.4"'' scale
  • 16" Fretboard Radius
  • Solid Mahogany top
  • Solid Mahogany back
  • Solid Mahogany sides
  • Mahogany neck
  • Katalox fretboard
  • Bridge pickup: Fishman Gold Plus Natural I (Preamp/Active)
  • Katalox bridge
  • Acoustic Modified Low Oval Set neck
  • 20 Medium frets
  • Golden Age Relic Nickel tuners
  • Compare Specs >

Yamaha LL-TA Overview

  • From Yamaha's 2016 TransAcoustic Guitars series
  • Made in China
  • 6 strings
  • 25.6"'' scale
  • 15.75" Fretboard Radius
  • Solid Engelmann Spruce A.R.E. top
  • Solid Rosewood back
  • Solid Rosewood sides
  • Mahogany + Rosewood 5-ply neck
  • Ebony fretboard
  • Bridge pickup: SYSTEM70 TransAcoustic + SRT Piezo Pickup (Preamp/Active)
  • Ebony bridge
  • Acoustic C Set neck
  • 20 Medium frets
  • Die-Cast Gold tuners
  • Weight between 5.35lbs (2.4kgs) and 5.75lbs (2.6kgs)
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Mahogany wood pattern used for guitar building
Mahogany

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Martin 000-15M StreetMaster

Katalox wood pattern used for guitar building
Katalox

Katalox is a type of wood that is native to Mexico and parts of Central America. It is a hardwood that is known for its strength and durability. It's tone is well balanced across all frequencies.

Woods Used in the Yamaha LL-TA

Ebony wood pattern used for guitar building
Ebony
Spruce wood pattern used for guitar building
Spruce
Rosewood wood pattern used for guitar building
Rosewood

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

Rosewood is an almost purple-looking wood that is used mainly for fretboards since it's heavy, rare, and expensive. It's sometimes used on acoustic guitar bodies to create stronger warm tones. Find out more about Rosewood.

Winner: Yamaha LL-TA.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Martin 000-15M StreetMaster
Sustain 90
Versatility 85
Tuning Stability 70
Sound 86
Yamaha LL-TA
Sustain 90
Versatility 95
Tuning Stability 65
Sound 88

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Martin 000-15M StreetMaster compares to the Yamaha LL-TA.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Martin 000-15M StreetMaster is built in United States while the Yamaha LL-TA is made in China.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.

Winner: Martin 000-15M StreetMaster

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Martin 000-15M StreetMaster has a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.

On the other hand, the Yamaha LL-TA comes with a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.

Winner: Martin 000-15M StreetMaster.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. The Martin 000-15M StreetMaster's are Golden Age Relic Nickel while the Yamaha LL-TA's are Die-Cast Gold

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Martin 000-15M StreetMaster
  • Made in United States
  • Expensive Wood
  • Bone Nut
  • Top Brand Pickups
  • Electronics
  • Compensated Saddle
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Yamaha LL-TA
  • Expensive Wood
  • Electronics
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in China
  • No High-Quality Nut
  • No Top Brand Pickups
  • Low-Quality Material Saddle
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Martin 000-15M StreetMaster
Quality of materials 81
Features 85
Quality Control 90
Build Quality 85
Yamaha LL-TA
Quality of materials 71
Features 80
Quality Control 65
Build Quality 72

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Martin 000-15M StreetMaster Nut Width
Martin 000-15M StreetMaster Nut Width
Yamaha LL-TA Nut Width
Yamaha LL-TA Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Yamaha LL-TA has the wider nut with 44mm (1.732'') vs 42.9mm (1.688''). This is a 1.1mm (0.044'') difference

This means that it will be more difficult to do bar chords on the Yamaha LL-TA, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Martin 000-15M StreetMaster's Scale Length
Martin 000-15M StreetMaster's Scale Length
Yamaha LL-TA's Scale Length
Yamaha LL-TA's Scale Length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

The Yamaha LL-TA has the longest scale: 25.6". The Martin 000-15M StreetMaster is only 25.4" long. This is a 0.2'' (5.1mm) scale length difference.

This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.

This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.

Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Martin 000-15M StreetMaster Neck Profile
Martin 000-15M StreetMaster's neck profile
Yamaha LL-TA Neck Profile
Yamaha LL-TA's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Martin 000-15M StreetMaster and the Yamaha LL-TA have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Martin 000-15M StreetMaster Fingerboard Radius
Martin 000-15M StreetMaster's Fingerboard radius
Yamaha LL-TA Fingerboard Radius
Yamaha LL-TA's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Yamaha LL-TA's fingerboard radius is smaller, which means it's more curved than the Martin 000-15M StreetMaster's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Martin 000-15M StreetMaster.

Still, both tend to favor soloing over chords, so if you're looking for a guitar for playing rhythm, you might want something else with a radius closer to a Stratocaster's 9.5''.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Martin 000-15M StreetMaster:
Big Hands
Small Hands
Yamaha LL-TA:
Big Hands
Small Hands

Fret Size

Martin 000-15M StreetMaster and Yamaha LL-TA Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Martin 000-15M StreetMaster
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73
Yamaha LL-TA
Bending & Vibrato Ease 75
Chord Playability 65
Solo Playability 80
Playability 73

Specs Side-by-Side

Martin 000-15M StreetMaster vs Yamaha LL-TA
General Martin 000-15M StreetMaster Yamaha LL-TA
Brand: Martin Yamaha
Year: 2017 2016
Strings: 6 6
Made in: United States China
Series: 15 TransAcoustic Guitars
Colors: Natural Natural
Left-Handed Version: Yes No
Body
Type: Hollowbody Hollowbody
Body Material: Solid Mahogany Solid Engelmann Spruce A.R.E.
Sides Material: Mahogany Rosewood
Back Material: Mahogany Rosewood
Bridge: Katalox Ebony
Neck
Neck Joint: Set Set
Tuners: Golden Age Relic Nickel Die-Cast Gold
Fretboard: Katalox Ebony
Neck Material: Mahogany Mahogany + Rosewood 5-ply
Decoration: Abalone Diamonds and Squares Short Pattern Dots
Scale Size: 25.4" 25.6"
Shape: Acoustic Modified Low Oval Acoustic C
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 16" 15.75"
Nut: Bone Plastic
Nut Width: 42.9mm (1.688'') 44mm (1.732'')
Electronics
Bridge Pickup: Fishman Gold Plus Natural I (Preamp / Active) SYSTEM70 TransAcoustic + SRT Piezo Pickup (Preamp / Active)