Swap
Swap
Martin 000-10E
Martin 000-X2E
VS
Playability
77
Sound
85
Build
76
Value
84
Score
79
FIND IT ON:
Sweetwater logoAmazon logo
Playability
77
Sound
83
Build
71
Value
82
Score
77
FIND IT ON:
Amazon logoSweetwater logo
Add more to comparison

Martin 000-10E vs 000-X2E

Reasons to Get
Martin 000-10E over 000-X2E

Sides Wood
Solid vs Laminated
Helps with richer tones and louder volume
Back Wood
Solid vs Laminated
Helps with richer tones and louder volume
Value Score
84 vs 82
Better price/quality relationship

Reasons to Get
Martin 000-X2E over 000-10E

Release Year
2020 vs 2019
From a more recent year
Avg. Weight
4.275lbs (1.9kgs) vs 4.65lbs (2.1kgs)
Tends to be lighter

Other Key Differences
Martin 000-10E vs 000-X2E

Back Material
Sapele vs HPL
Different Back Material
Sides Material
Sapele vs HPL
Different Sides Material
Bridge Material
FSC Certified Richlite vs Select Hardwood
Different Bridge Material
Body Wood
Sapele vs Spruce
Different Body Wood
Fretboard Wood
Richlite vs Hardwood
Different Fretboard Wood

Shared Features
Martin 000-10E vs 000-X2E

Saddle Material
Ivory Tusq
Same Saddle Material
Neck Wood
Hardwood
Same Neck Wood
Headstock
3-3
Same Headstock
Nut Material
Corian
Same Nut Material
Strings
6
Same playing style
Body Type
Hollowbody
Warm tone, lighter and acoustic sound
Switch Positions
0
Same pickups versatility
Volume Knobs
0
Same volume control
Tone Knobs
0
Same tone control
Number of Frets
20
Same maximum octave
Nut Width
1.75'' (44.5mm)
Same string separation at the nut
Paint Finish
Poly
Resistant paint that ages well
Bridge
Fixed
Good sustain and needs no set-up
Scale Length
24.9'' (632.5mm)
Same string tension and fret separation
Fretboard Radius
16'' (406.4mm)
Same fretboard comfortability
Neck Profile Type
C
Comfortable neck that works for most people
Type of Frets
Medium
You'll feel the fretboard when pressing down the strings

Common Strengths

  • Solid Top Wood
  • High-Quality Nut
  • Top Pickup Brand

Common Weaknesses

  • Pickup Alter Switch/Knob
  • Locking Tuners
  • High-Quality Frets
  • Compound Radius Fretboard
  • From a High-Quality-Standards Country
  • Luminescent Sidedots
  • Strap Lock
  • Expensive Wood
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that the Martin 000-10E is probably the better product overall with its final score of 79 compared to the Martin 000-X2E's 77 score, although not by a lot.

The Martin 000-10E wins when it comes to sound, build quality, value for the money. On the other hand, the Martin 000-X2E has the upper hand when it comes to.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

Both meet 3 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.

New Player Friendliness

Martin 000-10E
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

New Player Friendliness

Martin 000-X2E
  • Easy-to-use bridge
  • Tall frets
  • Comfortable neck
  • Comfortable shape
  • Comfortable fretboard
  • Narrow nut
  • Short scale
  • Soft Strings
  • Locking tuners

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Martin 000-10E Overview

  • From Martin's 2019 Road series
  • Made in Mexico
  • 6 strings
  • 24.9"'' scale
  • 16" Fretboard Radius
  • Solid Sapele top
  • Solid Sapele back
  • Solid Sapele sides
  • Select Hardwood neck
  • FSC Certified Richlite fretboard
  • Bridge pickup: Fishman MX-T (Preamp/Active)
  • FSC Certified Richlite bridge
  • Acoustic Performing Artist Set neck
  • 20 Medium frets
  • Chrome Enclosed Gear tuners
  • Weight between 4.6lbs (2.1kgs) and 4.7lbs (2.1kgs)
  • Compare Specs >

Martin 000-X2E Overview

  • From Martin's 2020 X series
  • Made in Mexico
  • 6 strings
  • 24.9"'' scale
  • 16" Fretboard Radius
  • Solid Spruce top
  • HPL back
  • HPL sides
  • Select Hardwood neck
  • Select Hardwood fretboard
  • Bridge pickup: Fishman MX (Preamp/Active)
  • Select Hardwood bridge
  • Acoustic Performing Artist Set neck
  • 20 Medium frets
  • Chrome Enclosed Gear tuners
  • Weight between 4lbs (1.8kgs) and 4.55lbs (2.1kgs)
  • Compare Specs >

Sound Quality Comparison

The most important thing that will determine the tone of an acoustic guitar is the wood. Let's take a look at the differences between both .

Woods Used in Both

Hardwood wood pattern used for guitar building
Hardwood

Hardwood is just a generic wood that can come from many species. This type of wood is used to build guitars because it provides a rich, warm sound. The wood also has good structural properties, making it durable and long-lasting.

Woods Used in the Martin 000-10E

Richlite wood pattern used for guitar building
Richlite
Sapele wood pattern used for guitar building
Sapele

It's very similar to Ebony, but it is much cheaper to make. The main reason is that it is made from resin-infused paper. It is very durable and soft, so it's often used for fretboards and tops.

It's similar to Mahogany in both color and tone. It can produce warm tones, and it's known for its beautiful figured grain patterns. Find out more about Sapele.

Woods Used in the Martin 000-X2E

Spruce wood pattern used for guitar building
Spruce
HPL wood pattern used for guitar building
HPL

Spruce has a light color with tight grain patterns. It's very stiff but relatively light. It's known for producing a well-rounded tone with a broad dynamic range. Find out more about Spruce.

HPL is a high-pressure laminate made from multiple layers of paper or fabric that are impregnated with resin and then fused together under high pressure and heat.

Winner: Tie.

Electronics

Both come with electronics that allow you connect them to an amplifier or interface for recording.

Winner:Tie.

Final Sound Quality Scores

Martin 000-10E
Sustain 85
Versatility 85
Tuning Stability 70
Sound 85
Martin 000-X2E
Sustain 75
Versatility 85
Tuning Stability 70
Sound 83

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Martin 000-10E compares to the Martin 000-X2E.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in Mexico.

Mexico has been for a long time where Fender has built their semi-premium series. If you don't want to overpay for a wellp-built instrument, a guitar built in this country by a good brand always offers good value for the money.

Winner: Tie

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

In this case, both have Corian nuts. It used to be the go-to nut for Gibson, but it's slowly being replaced by Graph Tech (Tusq). It's a synthetic material made to be similar to Bone, but it doesn't have the same self-lubricating properties, and it's less resistant.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Tuners

Both come with regular tuners. Both come with Chrome Enclosed Gear.

Winner: Tie.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Martin 000-10E
  • Top Brand Pickups
  • Electronics
  • Solid Top Wood
  • Solid Side Wood
  • Solid Back Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Mexico
  • No Expensive Woods
  • No High-Quality Nut
  • Low-Quality Material Saddle
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock
Strengths & Weaknesses
Martin 000-X2E
  • Top Brand Pickups
  • Electronics
  • Solid Top Wood
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • Made in Mexico
  • No Expensive Woods
  • No High-Quality Nut
  • Low-Quality Material Saddle
  • Laminated Side Wood
  • Laminated Back Wood
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Martin 000-10E
Quality of materials 72
Features 85
Quality Control 70
Build Quality 76
Martin 000-X2E
Quality of materials 58
Features 85
Quality Control 70
Build Quality 71

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Martin 000-10E Nut Width
Both Guitars Have The Same Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 44.5mm (1.75'').

This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.

Scale Length

Martin 000-10E and Martin 000-X2E's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 24.9".

This is the scale found in most triple-O acoustic guitars. It's still considered a long scale, but shorter than the standard 25.5" scale.

A shorter scale length guitar has a few advantages. One is that it is easier to play because the strings are under less tension. This can be helpful for beginners, or those with smaller hands.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Martin 000-10E Neck Profile
Both guitars have the same neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

Both the Martin 000-10E and the Martin 000-X2E have a C-shaped neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Martin 000-10E Fingerboard Radius
Both Guitars Have The Same Fretboard Radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

Both the Martin 000-10E and the Martin 000-X2E have the same fretboard radius of 16". This fretboard radius is really different from Stratocasters, but it's also a lot flatter than Les Paul fingerboards. It'll favor plating single notes over playing chords. This doesn't mean you can't use it for rhythm, but a more curved fretboard offers better playability for chords. Bending and sliding without losing sustain will also be more likely in a flat fretboard like this one.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Martin 000-10E:
Big Hands
Small Hands
Martin 000-X2E:
Big Hands
Small Hands

Fret Size

Martin 000-10E and Martin 000-X2E Frets Size
Both have a similar Medium fret size

Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.

Final Playability Scores

Martin 000-10E
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 80
Playability 77
Martin 000-X2E
Bending & Vibrato Ease 80
Chord Playability 70
Solo Playability 80
Playability 77

Specs Side-by-Side

Martin 000-10E vs 000-X2E
General Martin 000-10E 000-X2E
Brand: Martin Martin
Year: 2019 2020
Strings: 6 6
Made in: Mexico Mexico
Series: Road X
Colors: Natural Natural
Left-Handed Version: Yes Yes
Body
Type: Hollowbody Hollowbody
Body Material: Solid Sapele Solid Spruce
Sides Material: Sapele HPL
Back Material: Sapele HPL
Bridge: FSC Certified Richlite Select Hardwood
Neck
Neck Joint: Set Set
Tuners: Chrome Enclosed Gear Chrome Enclosed Gear
Fretboard: FSC Certified Richlite Select Hardwood
Neck Material: Select Hardwood Select Hardwood
Decoration: Mother-of-Pearl Pattern Dots Mother-of-Pearl Pattern 28 Style
Scale Size: 24.9" 24.9"
Shape: Acoustic Performing Artist Acoustic Performing Artist
Frets: 20 Medium Nickel Silver 20 Medium Nickel Silver
Fretboard Radius: 16" 16"
Nut: Corian Corian
Nut Width: 44.5mm (1.75'') 44.5mm (1.75'')
Electronics
Bridge Pickup: Fishman MX-T (Preamp / Active) Fishman MX (Preamp / Active)