Swap
Swap
Jackson USA Signature Mick Thomson Soloist
Ibanez ATZ10P
VS
Playability
78
Sound
79
Build
72
Value
61
Score
76
FIND IT ON:
Sweetwater logo
Playability
73
Sound
82
Build
72
Value
76
Score
76
FIND IT ON:
Sweetwater logo
Add more to comparison

Jackson USA Signature Mick Thomson Soloist vs Ibanez ATZ10P

Reasons to Get
Jackson USA Signature Mick Thomson Soloist over Ibanez ATZ10P

Country of Manufacturing
United States vs Indonesia
Built with higher quality standards
Compound Radius
12" to 16" vs 12"
Balanced playability for chords and single-notes
Neck Profile
Jackson Standard vs ATZ
Thin and flat neck for playing fast
Neck Joint
Neck-Through vs Bolt-On
Stronger neck and easier access to upper frets
Pickups
HH vs HHH
High output without hum
Number of Frets
24 vs 22
Allows to reach higher notes
Neck Thickness at 1st Fret
0.79'' (20.1mm) vs 0.83'' (21.1mm)
More comfortable open chords for small hands
Neck Thickness at 12th Fret
0.85'' (21.6mm) vs 0.91'' (23.1mm)
More comfortable at higher frets for small hands
Nut Width
1.688'' (42.9mm) vs 1.594'' (40.5mm)
Less likely to mute strings by accident and more space for fingerstyle
Strap Lock
Yes vs None
Protects your guitar from dropping by locking the strap
Bridge
Fixed vs Tremolo
Good sustain and needs no set-up
Pickups Power
Active vs Passive
More output

Reasons to Get
Ibanez ATZ10P over Jackson USA Signature Mick Thomson Soloist

Release Year
2022 vs 2018
From a more recent year
Number of Frets
22 vs 24
Warmer neck pickup
Neck Profile
ATZ vs Jackson Standard
Comfortable neck that works for most people
Pickup Mods
Coil Split vs None
Splits humbuckers into single coil pickups
Switch Positions
5 vs 3
More tone options
Tone Knobs
2 vs 0
More tone control
Pickups
HHH vs HH
High output without hum and tons of tone versatility
Locking Tuners
Yes vs None
Easier to change strings
Neck Thickness at 1st Fret
0.83'' (21.1mm) vs 0.79'' (20.1mm)
More comfortable open chords for big hands
Neck Thickness at 12th Fret
0.91'' (23.1mm) vs 0.85'' (21.6mm)
More comfortable at higher frets for big hands
Nut Width
1.594'' (40.5mm) vs 1.688'' (42.9mm)
Favors small hands, easier bar chords and other shapes
Luminescent Sidedots
Yes vs None
Assists you when playing in dark environments
Bridge
Tremolo vs Fixed
Simple vibratos without too much maintenance
Pickups Power
Passive vs Active
Cleaner sound and no battery needed
Value Score
76 vs 61
Better price/quality relationship

Other Key Differences
Jackson USA Signature Mick Thomson Soloist vs Ibanez ATZ10P

Bridge Pickup
Mick Thomson Signature Seymour Duncan Blackouts AHB-3S vs DiMarzio AT-1
Different Bridge Pickup
Neck Pickup
Mick Thomson Signature Seymour Duncan Blackouts AHB-3S vs DiMarzio The Cruiser
Different Neck Pickup
Body Wood
Mahogany vs Alder
Different Body Wood
Neck Wood
Maple vs Roasted Maple
Different Neck Wood
Fretboard Wood
Ebony vs Roasted Maple
Different Fretboard Wood
Headstock
R6 vs 6
Different Headstock
Nut Material
Locking vs Ivory Tusq
Different Nut Material

Shared Features
Jackson USA Signature Mick Thomson Soloist vs Ibanez ATZ10P

Strings
6
Same playing style
Body Type
Solid Body
Feedback free
Volume Knobs
1
Same volume control
Paint Finish
Poly
Resistant paint that ages well
Scale Length
25.5'' (647.7mm)
Same string tension and fret separation
Type of Frets
Jumbo
You won't feel the fretboard when pressing down the strings

Common Strengths

  • High-Quality Nut
  • Top Pickup Brand

Common Weaknesses

  • Weight Relief
  • Stays in Tune (Evertune)
  • High-Quality Frets
  • Compound Radius Fretboard
  • 21:1 Tuner Ratio
  • Active/Passive Preamp

Table of Contents

Price History Comparison

Jackson USA Signature Mick Thomson Soloist Prices

SET PRICE ALERT
SET PRICE ALERT

These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.

Which One is Better Overall?

After going through our comparison algorithm, the results show that both instruments scored 76 out of 100, which makes them similar in terms of quality.

The Ibanez ATZ10P wins when it comes to sound, value for the money. On the other hand, the Jackson USA Signature Mick Thomson Soloist has the upper hand when it comes to playability.

If you got small hands, none of these instruments will make a big difference when it comes to comfortability.

Which One is Better for Beginners?

If you're looking for your first guitar to learn how to play, the Ibanez ATZ10P is the better choice.

The Ibanez ATZ10P meets 6 out of our 8 criteria items for beginner friendliness, while the Jackson USA Signature Mick Thomson Soloist meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.

New Player Friendliness

Jackson USA Signature Mick Thomson Soloist
  • Comfortable shape
  • Easy-to-use bridge
  • Comfortable fretboard
  • Tall frets
  • Comfortable neck
  • Narrow nut
  • Short scale
  • Locking tuners

New Player Friendliness

Ibanez ATZ10P
  • Comfortable shape
  • Easy-to-use bridge
  • Locking tuners
  • Tall frets
  • Narrow nut
  • Comfortable neck
  • Comfortable fretboard
  • Short scale

Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.

Jackson USA Signature Mick Thomson Soloist Overview

  • From Jackson's 2018 Artist Signature series
  • Mick Thomson Signature
  • Made in United States
  • 6 strings
  • 25.5"'' scale
  • 12" to 16" Fretboard Radius
  • Mahogany body
  • 3-piece Maple neck
  • Ebony fretboard
  • Bridge pickup: Mick Thomson Signature Seymour Duncan Blackouts AHB-3S (Humbucker/Active)
  • Neck pickup: Mick Thomson Signature Seymour Duncan Blackouts AHB-3S (Humbucker/Active)
  • 1 volume and 0 tone Dome knobs
  • 3-way Switch
  • Jackson MTB HT6 bridge bridge
  • Jackson Standard Neck-Through neck
  • 24 Jumbo frets
  • Jackson Sealed Die-Cast tuners
  • Compare Specs >

Ibanez ATZ10P Overview

  • From Ibanez's 2022 AT series
  • Andy Timmons Signature
  • Made in Indonesia
  • 6 strings
  • 25.5"'' scale
  • 12" Fretboard Radius
  • Alder body
  • Roasted Maple neck
  • Roasted Maple fretboard
  • Bridge pickup: DiMarzio AT-1 (Humbucker/Passive)
  • Middle pickup: DiMarzio The Cruiser (Humbucker/Passive)
  • Neck pickup: DiMarzio The Cruiser (Humbucker/Passive)
  • 1 volume and 2 tone Bell knobs
  • 5-way Switch
  • Wilkinson WV6-SB bridge
  • ATZ Bolt-On neck
  • 22 Jumbo frets
  • Gotoh MG-T locking machine heads tuners
  • Compare Specs >

Sound Quality Comparison

The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.

Woods Used in the Jackson USA Signature Mick Thomson Soloist

Maple wood pattern used for guitar building
Maple
Ebony wood pattern used for guitar building
Ebony
Mahogany wood pattern used for guitar building
Mahogany

Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.

Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.

Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.

Woods Used in the Ibanez ATZ10P

Roasted Maple wood pattern used for guitar building
Roasted Maple
Alder wood pattern used for guitar building
Alder

Roasted Maple is just maple without a finish. It's technically cheaper than regular maple, but it doesn't have any extra disadvantages because of this. The color is darker, and it's lighter weight and very stable even when there's a lot of humidity.

Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.

Winner: Jackson USA Signature Mick Thomson Soloist.

Pickup Configuration

The Jackson USA Signature Mick Thomson Soloist has an HH configuration while the Ibanez ATZ10P has HHH pickups.

Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.

On the other hand, A triple Humbucker (HHH) can be intimidating at first, but it's one of the combinations that offer the most tone versatility. You'll be able to have from a lot of output for Hard Rock genres, to warm and clean sounds that are more common in Jazz.

Pickups Quality

Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.

However, the Ibanez ATZ10P has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.

You can purchase similar pickups to the Jackson USA Signature Mick Thomson Soloist's and use them on any guitar:

We found the same or similar pickups to the Ibanez ATZ10P's online:

The Jackson USA Signature Mick Thomson Soloist's pickups are Active while the Ibanez ATZ10P's are Passive.

Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.

Winner: Ibanez ATZ10P.

Versatility Comparison

Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.

Switch Options

The Ibanez ATZ10P gives you 5 switch options while the Jackson USA Signature Mick Thomson Soloist gives you 3. This means that the Ibanez ATZ10P gives you more options to find the right pickup combination for the type of sound you want to achieve

Only the Ibanez ATZ10P comes with some kind of pickup modification: Coil Split.

Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.

Jackson USA Signature Mick Thomson Soloist pickups switch and push knobs diagram
Jackson USA Signature Mick Thomson Soloist's switch options
Ibanez ATZ10P pickups switch selector and push knobs diagram
Ibanez ATZ10P's switch options

When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.

Winner: Ibanez ATZ10P.

Final Sound Quality Scores

Jackson USA Signature Mick Thomson Soloist
Pickups 85
Sustain 90
Versatility 57
Tuning Stability 85
Sound 79
Ibanez ATZ10P
Pickups 90
Sustain 80
Versatility 82
Tuning Stability 75
Sound 82

Build Quality Comparison

When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson USA Signature Mick Thomson Soloist compares to the Ibanez ATZ10P.

Country of Origin

The manufacturing country can tell a lot about the build quality of an instrument. The Jackson USA Signature Mick Thomson Soloist is built in United States while the Ibanez ATZ10P is made in Indonesia.

The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.

Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.

Winner: Jackson USA Signature Mick Thomson Soloist

Nut Material

If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.

The Jackson USA Signature Mick Thomson Soloist has a Locking nut. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.

On the other hand, the Ibanez ATZ10P comes with a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.

Winner: Tie.

Fret Material

Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.

Unfortunately, none of them come with stainless steel frets.

Winner: Tie.

Bridge

The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.

The Jackson USA Signature Mick Thomson Soloist's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.

On the other hand, the Ibanez ATZ10P's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.

Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.

Winner: Tie.

Tuners

The Ibanez ATZ10P has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.

Nevertheless, the Jackson USA Signature Mick Thomson Soloist has a locking nut, so it should have even better tune stability and doesn't need locking tuners.

Winner: Ibanez ATZ10P.

Neck Joint

Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.

The Jackson USA Signature Mick Thomson Soloist has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.

On the other hand, the Ibanez ATZ10P comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.

Winner: Jackson USA Signature Mick Thomson Soloist.

Here is the list of features that were considered when choosing the winner in the Features subcategory:

Strengths & Weaknesses
Jackson USA Signature Mick Thomson Soloist
  • Made in United States
  • Expensive Wood
  • Locking Nut
  • Top Brand Pickups
  • Neck-Through Build
  • Compound Radius Fretboard
  • Strap Lock
  • Cheap Fret Wire (NS)
  • No Locking Tuners
  • No Push Knob or Extra Switch Option
  • No Weight Relief
  • No Luminescent Inlay
  • No Tremolo
  • No 21:1 Tuner Ratio
  • No Retainer Bar
Strengths & Weaknesses
Ibanez ATZ10P
  • Locking Tuners
  • Ivory Tusq Nut
  • Top Brand Pickups
  • Coil Split Pickups
  • Luminescent Inlay
  • Tremolo
  • Cheap Fret Wire (NS)
  • Made in Indonesia
  • No Expensive Woods
  • No Neck-Through Build
  • No Weight Relief
  • No Compound Radius Fretboard
  • No 21:1 Tuner Ratio
  • No Strap Lock

Final Build Quality Scores

Jackson USA Signature Mick Thomson Soloist
Quality of materials 41
Features 75
Quality Control 100
Build Quality 72
Ibanez ATZ10P
Quality of materials 66
Features 75
Quality Control 75
Build Quality 72

Playability Comparison

Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.

Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.

Nut Width

Jackson USA Signature Mick Thomson Soloist Nut Width
Jackson USA Signature Mick Thomson Soloist Nut Width
Ibanez ATZ10P Nut Width
Ibanez ATZ10P Nut Width

The nut width will affect the separation between strings at the nut. In this comparison, the Jackson USA Signature Mick Thomson Soloist has the wider nut with 42.9mm (1.688'') vs 40.5mm (1.594''). This is a 2.4mm (0.094'') difference

This means that it will be more difficult to do bar chords on the Jackson USA Signature Mick Thomson Soloist, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.

Scale Length

Jackson USA Signature Mick Thomson Soloist and Ibanez ATZ10P's Scale Length
Both have the same scale length

The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.

In this case, both have a scale length of 25.5".

This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.

However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.

Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.

Neck Profile

Jackson USA Signature Mick Thomson Soloist Neck Profile
Jackson USA Signature Mick Thomson Soloist's neck profile
Ibanez ATZ10P Neck Profile
Ibanez ATZ10P's neck profile

No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.

In this case, both have different neck shapes:

The Jackson USA Signature Mick Thomson Soloist has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.

The Ibanez ATZ10P, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.

Fretboard Radius

Jackson USA Signature Mick Thomson Soloist Fretboard Compound Radius
Jackson USA Signature Mick Thomson Soloist's Compound Fretboard Radius
Ibanez ATZ10P Fingerboard Radius
Ibanez ATZ10P's Fingerboard radius

Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.

In this case, the Jackson USA Signature Mick Thomson Soloist is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.

Hand Size Comfortability

Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.

After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .

Jackson USA Signature Mick Thomson Soloist:
Big Hands
Small Hands
Ibanez ATZ10P:
Big Hands
Small Hands

Fret Size

Jackson USA Signature Mick Thomson Soloist and Ibanez ATZ10P Frets Size
Both have a similar Jumbo fret size

Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.

Final Playability Scores

Jackson USA Signature Mick Thomson Soloist
Bending & Vibrato Ease 75
Chord Playability 60
Solo Playability 100
Playability 78
Ibanez ATZ10P
Bending & Vibrato Ease 80
Chord Playability 60
Solo Playability 80
Playability 73

Specs Side-by-Side

Jackson USA Signature Mick Thomson Soloist vs Ibanez ATZ10P
General Jackson USA Signature Mick Thomson Soloist Ibanez ATZ10P
Brand: Jackson Ibanez
Year: 2018 2022
Configuration: HH HHH
Strings: 6 6
Made in: United States Indonesia
Series: Artist Signature AT
Colors: White, Black Sunburst
Left-Handed Version: No No
Body
Type: Solid Body Solid Body
Body Material: Mahogany Alder
Bridge: Jackson MTB HT6 bridge Wilkinson WV6-SB
Neck
Neck Joint: Neck-Through Bolt-On
Tuners: Jackson Sealed Die-Cast Gotoh MG-T locking machine heads
Fretboard: Ebony Roasted Maple
Neck Material: 3-piece Maple Roasted Maple
Decoration: Black Dot
Scale Size: 25.5" 25.5"
Shape: Jackson Standard ATZ
Thickness: 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.85'' (21.6mm) 1st Fret: 0.83'' (21.1mm) - 12th Fret: 0.91'' (23.1mm)
Frets: 24 Jumbo Nickel Silver 22 Jumbo Nickel Silver
Fretboard Radius: 12" to 16" 12"
Nut: Locking Ivory Tusq
Nut Width: 42.9mm (1.688'') 40.5mm (1.594'')
Electronics
Bridge Pickup: Mick Thomson Signature Seymour Duncan Blackouts AHB-3S (Humbucker / Active) DiMarzio AT-1 (Humbucker / Passive)
Middle Pickup: DiMarzio The Cruiser (Humbucker / Passive)
Neck Pickup: Mick Thomson Signature Seymour Duncan Blackouts AHB-3S (Humbucker / Active) DiMarzio The Cruiser (Humbucker / Passive)
Switch: 3 Way 5 Way
Knobs: Dome Bell
Pickup Mods: None Coil Split
Volume Controls: 1 1
Tone Controls: 0 2