Jackson USA Signature Chris Broderick Soloist HT6 vs USA Signature Misha Mansoor Juggernaut HT6
Reasons to Get
Jackson USA Signature Chris Broderick Soloist HT6 over USA Signature Misha Mansoor Juggernaut HT6
Reasons to Get
Jackson USA Signature Misha Mansoor Juggernaut HT6 over USA Signature Chris Broderick Soloist HT6
Other Key Differences
Jackson USA Signature Chris Broderick Soloist HT6 vs USA Signature Misha Mansoor Juggernaut HT6
Shared Features
Jackson USA Signature Chris Broderick Soloist HT6 vs USA Signature Misha Mansoor Juggernaut HT6
Common Strengths
- Locking Tuners
- High-Quality Nut
- High-Quality Frets
- From a High-Quality-Standards Country
- Strap Lock
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- Compound Radius Fretboard
- Luminescent Sidedots
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that both instruments scored 80 out of 100, which makes them similar in terms of quality.
The Jackson USA Signature Misha Mansoor Juggernaut HT6 wins when it comes to sound, build quality. On the other hand, the Jackson USA Signature Chris Broderick Soloist HT6 has the upper hand when it comes to playability.
If you got small hands, none of these instruments will make a big difference when it comes to comfortability.
Which One is Better for Beginners?
Both meet 5 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Jackson USA Signature Chris Broderick Soloist HT6- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
New Player Friendliness
Jackson USA Signature Misha Mansoor Juggernaut HT6- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Jackson USA Signature Chris Broderick Soloist HT6 Overview
- From Jackson's 2016 Artist Signature series
- Chris Broderick Signature
- Made in United States
- 6 strings
- 25.5"'' scale
- 12" Fretboard Radius
- Arched Maple top
- Mahogany body
- Quartersawn Maple neck
- Ebony fretboard
- Bridge pickup: Direct Mount DiMarzio Chris Broderick CB6 (Humbucker/Passive)
- Neck pickup: Direct Mount DiMarzio Chris Broderick CB6 (Humbucker/Passive)
- 1 volume and 2 tone Dome knobs
- 3-way Switch
- Jackson Single-String Guitar Bridge bridge
- Jackson Standard Neck-Through neck
- 24 Jumbo frets
- Planet Waves Auto-Trim tuners
- Compare Specs >
Jackson USA Signature Misha Mansoor Juggernaut HT6 Overview
- From Jackson's 2018 Artist Signature series
- Misha Mansoor Signature
- Made in United States
- 6 strings
- 25.5"'' scale
- 20" Fretboard Radius
- Caramelized Basswood body
- Caramelized Quartersawn Maple neck
- Caramelized Flame Maple fretboard
- Bridge pickup: Bare Knuckle Ragnarok (Humbucker/Passive)
- Neck pickup: Bare Knuckle Ragnarok (Humbucker/Passive)
- 1 volume and 1 tone Dome knobs
- 5-way Switch
- Hipshot 6 Fixed .175 bridge
- Speed Bolt-On neck
- 24 Jumbo Stainless Steel frets
- Hipshot Open-Gear Locking tuners
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Jackson USA Signature Chris Broderick Soloist HT6
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Jackson USA Signature Misha Mansoor Juggernaut HT6
This wood has beautiful patterns only found in specific types of maple.
Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.
Winner: Jackson USA Signature Chris Broderick Soloist HT6.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
We found the same or similar pickups to the Jackson USA Signature Misha Mansoor Juggernaut HT6's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Jackson USA Signature Misha Mansoor Juggernaut HT6 gives you 5 switch options while the Jackson USA Signature Chris Broderick Soloist HT6 gives you 3. This means that the Jackson USA Signature Misha Mansoor Juggernaut HT6 gives you more options to find the right pickup combination for the type of sound you want to achieve
Both give you different pickup mod options.
The Jackson USA Signature Chris Broderick Soloist HT6 offers Coil Split, Killswitch.
Coil Split lets you disconnect one of the pickup coils. When used with humbuckers, it turns them into single-coil with lower output and cleaner tone.
A Killswitch lets you disengage the pickups instantly. It can be useful when playing live, and it allows you to create some cool sound effects by using the switch rapidly.
On the other hand, the Jackson USA Signature Misha Mansoor Juggernaut HT6 comes with the following: Multi-Voicing.
Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Jackson USA Signature Misha Mansoor Juggernaut HT6.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson USA Signature Chris Broderick Soloist HT6 compares to the Jackson USA Signature Misha Mansoor Juggernaut HT6.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Black Tusq XL nuts. TUSQ nuts are usually the highest quality you can get. Black TUSQs are made from a special slippery material that helps the strings get back to its original position (one of the keys to tune stability).
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Jackson USA Signature Misha Mansoor Juggernaut HT6 is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Jackson USA Signature Misha Mansoor Juggernaut HT6.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Jackson USA Signature Chris Broderick Soloist HT6 has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Jackson USA Signature Misha Mansoor Juggernaut HT6 comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Jackson USA Signature Chris Broderick Soloist HT6.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Jackson USA Signature Chris Broderick Soloist HT6
- Locking Tuners
- Made in United States
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Neck-Through Build
- Coil Split, Killswitch Pickups
- Strap Lock
- Cheap Fret Wire (NS)
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Jackson USA Signature Misha Mansoor Juggernaut HT6
- Stainless Steel Frets
- Locking Tuners
- Made in United States
- Expensive Wood
- Black Tusq XL Nut
- Top Brand Pickups
- Multi-Voicing Pickups
- Strap Lock
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42.9mm (1.688'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Jackson USA Signature Chris Broderick Soloist HT6 and the Jackson USA Signature Misha Mansoor Juggernaut HT6 have a D-shaped neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Jackson USA Signature Chris Broderick Soloist HT6's fingerboard radius is smaller, which means it's more curved than the Jackson USA Signature Misha Mansoor Juggernaut HT6's. This extra arc will make playing chords easier in this model. You won't be as likely to mute the strings, especially if you have big hands. However, playing single notes and bending will be easier on the Jackson USA Signature Misha Mansoor Juggernaut HT6.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both in this comparison favor small hands .
Jackson USA Signature Chris Broderick Soloist HT6:
Jackson USA Signature Misha Mansoor Juggernaut HT6:
Fret Size
Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.
