Show Full Spec Comparison
| Jackson USA Select Kelly KE2 | X Series Rhoads RRX24 | |
|---|---|---|
| General | ||
| Brand: | Jackson | Jackson |
| Year: | 2020 | 2018 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | United States | Indonesia |
| Series: | USA Select | X |
| Colors: | White, Black | Black, Green, Pink, Red, Yellow |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Alder | Basswood |
| Bridge: | Floyd Rose Original Double-Locking Tremolo | Floyd Rose Special Double-Locking Tremolo (Recessed) |
| Neck | ||
| Neck Joint: | Neck-Through | Neck-Through |
| Tuners: | Jackson Sealed Die-Cast | Jackson Sealed Die-Cast |
| Fretboard: | Ebony | Laurel |
| Neck Material: | Quartersawn Maple | Maple |
| Decoration: | Mother of Pearl Sharkfin | Reverse Green Sharkfin |
| Scale Size: | 25.5" | 25.5" |
| Shape: | Speed | Speed |
| Thickness: | 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm) | 1st Fret: 0.775'' (19.7mm) - 12th Fret: 0.835'' (21.2mm) |
| Frets: | 24 Jumbo Nickel Silver | 24 Jumbo Nickel Silver |
| Fretboard Radius: | 12" to 16" | 12" to 16" |
| Nut: | Locking | Locking |
| Nut Width: | 42.9mm (1.688'') | 42.9mm (1.688'') |
| Electronics | ||
| Bridge Pickups: | Seymour Duncan JB TB-4 (Humbucker / Passive) | Seymour Duncan Blackouts AHB-1B (Humbucker / Active) |
| Middle Pickup: | ||
| Neck Pickup: | Seymour Duncan Jazz SH-2 (Humbucker / Passive) | Seymour Duncan Blackouts AHB-1N (Humbucker / Active) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Dome | Dome |
| Pickup Mods: | None | None |
| Volume Controls: | 1 | 2 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Black | Chrome |
Show Diagrams Comparison
Reasons to Get
Jackson USA Select Kelly KE2 over X Series Rhoads RRX24
Reasons to Get
Jackson X Series Rhoads RRX24 over USA Select Kelly KE2
Other Key Differences
Jackson USA Select Kelly KE2 vs X Series Rhoads RRX24
Shared Features
Jackson USA Select Kelly KE2 vs X Series Rhoads RRX24
Common Strengths
- Neck-Through Build
- High-Quality Nut
- Compound Radius Fretboard
- Top Pickup Brand
Common Weaknesses
- Pickup Alter Switch/Knob
- Weight Relief
- Retainer Bar
- Stays in Tune (Evertune)
- High-Quality Frets
- Luminescent Sidedots
- Strap Lock
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Jackson USA Select Kelly KE2:
Jackson X Series Rhoads RRX24:
Beginner Friendliness
The Jackson USA Select Kelly KE2 meets 4 out of our 8 criteria items for beginner friendliness, while the Jackson X Series Rhoads RRX24 meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Jackson USA Select Kelly KE2- Comfortable shape
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
New Player Friendliness
Jackson X Series Rhoads RRX24- Comfortable fretboard
- Tall frets
- Comfortable neck
- Comfortable shape
- Narrow nut
- Short scale
- Locking tuners
- Easy-to-use bridge
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Jackson USA Select Kelly KE2
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Jackson X Series Rhoads RRX24
There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.
Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.
Winner: Jackson USA Select Kelly KE2.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
You can purchase similar pickups to the Jackson USA Select Kelly KE2's and use them on any guitar:
We found the same or similar pickups to the Jackson X Series Rhoads RRX24's online:
The Jackson USA Select Kelly KE2's pickups are Passive while the Jackson X Series Rhoads RRX24's are Active.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Neither of them come with some kind of coil split or pickup mod option. This makes both lacking in terms of versatility.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Jackson USA Select Kelly KE2.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson USA Select Kelly KE2 compares to the Jackson X Series Rhoads RRX24.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Jackson USA Select Kelly KE2 is built in United States while the Jackson X Series Rhoads RRX24 is made in Indonesia.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Winner: Jackson USA Select Kelly KE2
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Locking nuts. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
Unfortunately, neither of them have a retainer bar for the nut, which would be a helpful addition. Without it, the strings will change pitch once you lock down the nut, so you'll have to make more micro-adjustments at the bridge to tune it correctly.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. Both come with Jackson Sealed Die-Cast.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Jackson USA Select Kelly KE2
- Made in United States
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Tremolo
- Compound Radius Fretboard
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Jackson X Series Rhoads RRX24
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Tremolo
- Compound Radius Fretboard
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No Expensive Woods
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No 21:1 Tuner Ratio
- No Retainer Bar
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42.9mm (1.688'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Jackson USA Select Kelly KE2 and the Jackson X Series Rhoads RRX24 have a D-shaped neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both have a compound radius. This means both offer you the best craftsmanship when it comes to fretboard design. You'll have an arc to help you play chords close to the nut, while also having a flat design at the higher frets for faster soloing and easier bends.
Fret Size
Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.
