Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT vs Schecter E-1 SLS Evil Twin
Reasons to Get
Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT over Schecter E-1 SLS Evil Twin
Reasons to Get
Schecter E-1 SLS Evil Twin over Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT
Other Key Differences
Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT vs Schecter E-1 SLS Evil Twin
Shared Features
Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT vs Schecter E-1 SLS Evil Twin
Common Strengths
- Neck-Through Build
- High-Quality Frets
- Compound Radius Fretboard
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- From a High-Quality-Standards Country
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Schecter E-1 SLS Evil Twin is probably the better product overall with its final score of 79 compared to the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT's 70 score, although not by a lot.
The Schecter E-1 SLS Evil Twin wins when it comes to sound, playability, build quality, value for the money. This means that it wins over the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT in every aspect.
If you got small hands, you'll probably feel more comfortable playing the Schecter E-1 SLS Evil Twin.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Schecter E-1 SLS Evil Twin is the better choice.
The Schecter E-1 SLS Evil Twin meets 7 out of our 8 criteria items for beginner friendliness, while the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT meets only 5. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT- Comfortable shape
- Easy-to-use bridge
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Schecter E-1 SLS Evil Twin- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT Overview
- From Jackson's 2019 Artist Signature series
- Phil Demmel Signature
- Made in Indonesia
- 6 strings
- 25.5"'' scale
- 12" to 16" Fretboard Radius
- Mahogany body
- Maple neck
- Laurel fretboard
- Bridge pickup: EMG 81 (Humbucker/Active)
- Neck pickup: EMG 60 (Humbucker/Active)
- 2 volume and 0 tone Dome knobs
- 3-way Switch
- Jackson TOM-Style Adjustable String-Through-Body bridge
- Speed Neck-Through neck
- 24 Jumbo frets
- Jackson Sealed Die-Cast tuners
- Compare Specs >
Schecter E-1 SLS Evil Twin Overview
- From Schecter's 2018 SLS Elite series
- Made in South Korea
- 6 strings
- 25.5"'' scale
- 12" to 16" Fretboard Radius
- Swamp Ash body
- Maple/Walnut/Padauk Multi-ply w/ Carbon Fiber Reinforcement Rods neck
- Ebony fretboard
- Bridge pickup: Fishman Fluence Modern Ceramic (Humbucker/Active)
- Neck pickup: Fishman Fluence Modern Alnico (Humbucker/Active)
- 1 volume and 1 tone Dome knobs
- 3-way Switch
- TonePros T3BT TOM & T1Z Tailpiece bridge
- Ultra Thin C Neck-Through neck
- 24 XL Jumbo Stainless Steel frets
- Schecter Locking tuners
- Weight around 8.65lbs (3.9kgs)
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT
There are many types of Laurel, but East Indian is the most common for guitar building. Its color can vary from dark to light brown with black lines. Many people find its tonality similar to Rosewood, which favors the warmer frequencies. Find out more about Laurel.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Woods Used in the Schecter E-1 SLS Evil Twin
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Ash is a type of wood that Fender used almost exclusively in the 50s, and it's still used by many brands. It's a dense wood with a light color that works well for a transparent, natural finish because of its beautiful patterns. In terms of sound, it's known for emphasizing the mid and high frequencies, but with strong low end. Find out more about Ash.
Winner: Schecter E-1 SLS Evil Twin.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
You can purchase similar pickups to the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT's and use them on any guitar:
We found the same or similar pickups to the Schecter E-1 SLS Evil Twin's online:
Both use Active pickups. These pickups use an additional 9v battery to be able to increase their output for high gain tones. This is why they're popular among heavy metal guitarists. Their disadvantage is that you need batteries for the pickups, so you'll need to spend money on batteries and time swapping them. Also, the clean tones aren't as clean as other pickups because they'll have really hot output.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Schecter E-1 SLS Evil Twin comes with some kind of pickup modification: Multi-Voicing.
Multi-Voicing means the pickups come with multiple ''voices'', which means they can change the tone and gain by a simple switch or knob. Piezo, Fishman and similar are considered multi-voicing pickups.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Schecter E-1 SLS Evil Twin.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT compares to the Schecter E-1 SLS Evil Twin.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT is built in Indonesia while the Schecter E-1 SLS Evil Twin is made in South Korea.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
South Korea was for many years the number one choice for mass-producing semi-premium guitars. They can build excellent guitars for a cheap price. Now, it's less common to find Korean guitars because Indonesia has proved capable of building guitars just as well, but likely for cheaper.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT has a Plastic nut. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
On the other hand, the Schecter E-1 SLS Evil Twin comes with a Compensated nut. Each hole where the string sits at the nut is cut at a different distance from the bridge, which compensates for the different amount of tension that each string is subject to. This fixes most intonation issues across the fretboard, so it gives great tuning stability.
Winner: Schecter E-1 SLS Evil Twin.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
In this comparison, the Schecter E-1 SLS Evil Twin is the only one that has stainless steel frets. These frets will basically last for the entire life of the guitar. They will never need polishing nor replacement. And not only that, but some people also notice that bending and vibratos are much easier to perform when they upgrade to stainless steel.
Winner: Schecter E-1 SLS Evil Twin.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Schecter E-1 SLS Evil Twin has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Schecter E-1 SLS Evil Twin.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
Both have a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
Winner: Tie.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT
- Expensive Wood
- Top Brand Pickups
- Neck-Through Build
- Compound Radius Fretboard
- Strap Lock
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in Indonesia
- No High-Quality Nut
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No 21:1 Tuner Ratio
Schecter E-1 SLS Evil Twin
- Stainless Steel Frets
- Locking Tuners
- Expensive Wood
- Compensated Nut
- Top Brand Pickups
- Neck-Through Build
- Multi-Voicing Pickups
- Luminescent Inlay
- Compound Radius Fretboard
- Made in South Korea
- No Weight Relief
- No Tremolo
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT has the wider nut with 42.9mm (1.688'') vs 42mm (1.654''). This is a 0.9mm (0.034'') difference
This means that it will be more difficult to do bar chords on the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
The Schecter E-1 SLS Evil Twin, on the other hand, has a C neck. This is what you'll find in most modern guitars. Most people feel like the thickness of a C neck is simply the less intrusive one for playing fast, while at the same time allowing you to grab the neck easily for resting if you want to.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both have a compound radius. This means both offer you the best craftsmanship when it comes to fretboard design. You'll have an arc to help you play chords close to the nut, while also having a flat design at the higher frets for faster soloing and easier bends.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT favors large hands more than the Schecter E-1 SLS Evil Twin. But it's still more comfortable for people with small hands, as you can see in the score meter below.
Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT:
Schecter E-1 SLS Evil Twin:
Fret Size
The Schecter E-1 SLS Evil Twin has XL Jumbo frets, which should be taller than the Jackson Pro Series Signature Phil Demmel Demmelition Fury PDT's Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
