Show Full Spec Comparison
| Jackson Pro Plus XT Soloist SLAT HT6 Baritone | Fender JV Modified '60s Stratocaster | |
|---|---|---|
| General | ||
| Brand: | Jackson | Fender |
| Year: | 2024 | 2022 |
| Configuration: | HH | SSS |
| Strings: | 6 | 6 |
| Made in: | Indonesia | Japan |
| Series: | Pro Plus | JV Modified |
| Colors: | Black | White |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Solid Body |
| Body Material: | Nyatoh | Basswood |
| Bridge: | Jackson HT6 String-Through-Body Hardtail | 6-Saddle Vintage-Style Synchronized Tremolo with Bent Steel Saddles |
| Neck | ||
| Neck Joint: | Neck-Through | Bolt-On |
| Tuners: | Jackson Sealed Die-Cast Locking | Vintage-Style Locking |
| Fretboard: | Ebony | Maple |
| Neck Material: | 3-piece Maple | Maple |
| Decoration: | Black Sharkfin | Black Dot |
| Scale Size: | 27" | 25.5" |
| Shape: | Jackson Standard | Thick Soft V |
| Thickness: | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.85'' (21.6mm) | 1st Fret: - 12th Fret: |
| Frets: | 24 Jumbo Nickel Silver | 21 Medium Jumbo Nickel Silver |
| Fretboard Radius: | 12" to 16" | 9.5" |
| Nut: | Ivory Tusq | Bone |
| Nut Width: | 42.9mm (1.688'') | 41.9mm (1.65'') |
| Electronics | ||
| Bridge Pickups: | Seymour Duncan Nazgul (Humbucker / Passive) | Fender Vintage-Style Single-Coil Strat (Single Coil / Passive) |
| Middle Pickup: | Fender Vintage-Style Single-Coil Strat (Single Coil / Passive) | |
| Neck Pickup: | Seymour Duncan Sentient (Humbucker / Passive) | Fender Vintage-Style Single-Coil Strat (Single Coil / Passive) |
| Switch: | 3 Way | 5 Way |
| Knobs: | Speed | Bell |
| Pickup Mods: | Killswitch | Parallel Split |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 0 | 2 |
| Hardware | ||
| Strap Lock: | Yes | No |
| Hardware Color: | Black | Nickel |
Show Diagrams Comparison
Reasons to Get
Jackson Pro Plus XT Soloist SLAT HT6 Baritone over Fender JV Modified '60s Stratocaster
Reasons to Get
Fender JV Modified '60s Stratocaster over Jackson Pro Plus XT Soloist SLAT HT6 Baritone
Other Key Differences
Jackson Pro Plus XT Soloist SLAT HT6 Baritone vs Fender JV Modified '60s Stratocaster
Shared Features
Jackson Pro Plus XT Soloist SLAT HT6 Baritone vs Fender JV Modified '60s Stratocaster
Common Strengths
- Locking Tuners
- High-Quality Nut
- Top Pickup Brand
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- High-Quality Frets
- Compound Radius Fretboard
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Fender JV Modified '60s Stratocaster favors large hands more than the Jackson Pro Plus XT Soloist SLAT HT6 Baritone.
Jackson Pro Plus XT Soloist SLAT HT6 Baritone:
Fender JV Modified '60s Stratocaster:
Beginner Friendliness
The Fender JV Modified '60s Stratocaster meets 7 out of our 8 criteria items for beginner friendliness, while the Jackson Pro Plus XT Soloist SLAT HT6 Baritone meets only 6. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Jackson Pro Plus XT Soloist SLAT HT6 Baritone- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
New Player Friendliness
Fender JV Modified '60s Stratocaster- Comfortable shape
- Easy-to-use bridge
- Locking tuners
- Comfortable fretboard
- Tall frets
- Narrow nut
- Comfortable neck
- Short scale
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Woods Used in the Jackson Pro Plus XT Soloist SLAT HT6 Baritone
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Nyatoh has been replacing Mahogany for guitar building. It's fairly hard, durable, more sustentable and common than Mahogany. Find out more about Nyatoh.
Woods Used in the Fender JV Modified '60s Stratocaster
Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.
Winner: Jackson Pro Plus XT Soloist SLAT HT6 Baritone.
Pickup Configuration
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone has an HH configuration while the Fender JV Modified '60s Stratocaster has SSS pickups.
Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
On the other hand, SSS is perfect for players who like to play clean. The definition you get between notes and the crispiness is unmatched by most other configurations. You can still use it for distortion, but you won't get the same kind of output and power compared to a humbucker, and the hum they produce also makes them less adequate for high gain.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
However, the Fender JV Modified '60s Stratocaster has a slight sound quality advantage when taking into account other factors like the type of pickups, magnet, position, etc.
You can purchase similar pickups to the Jackson Pro Plus XT Soloist SLAT HT6 Baritone's and use them on any guitar:
We found the same or similar pickups to the Fender JV Modified '60s Stratocaster's online:
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Fender JV Modified '60s Stratocaster.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
The Fender JV Modified '60s Stratocaster gives you 5 switch options while the Jackson Pro Plus XT Soloist SLAT HT6 Baritone gives you 3. This means that the Fender JV Modified '60s Stratocaster gives you more options to find the right pickup combination for the type of sound you want to achieve
Both give you different pickup mod options.
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone offers Killswitch.
A Killswitch lets you disengage the pickups instantly. It can be useful when playing live, and it allows you to create some cool sound effects by using the switch rapidly.
On the other hand, the Fender JV Modified '60s Stratocaster comes with the following: Parallel Split.
The Parallel Split feature allows it to split and connect some of the pickups in parallel. When wired in parallel, the result is a very bright tone. This is the wire technique used in most Stratocaster guitars, and it's what gives them their signature transparent and clear sound. This is because the pickups' inputs and outputs are wired together, which reduces the signal's travel distance to the output jack.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Fender JV Modified '60s Stratocaster.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson Pro Plus XT Soloist SLAT HT6 Baritone compares to the Fender JV Modified '60s Stratocaster.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. The Jackson Pro Plus XT Soloist SLAT HT6 Baritone is built in Indonesia while the Fender JV Modified '60s Stratocaster is made in Japan.
Indonesia is becoming the most popular country for guitar building because they can make good instruments for a low price. Some people think that they're 'the new China' when it comes to build quality. But the truth is that Indonesian guitars are more consistent, although Chinese quality has improved a lot in the last few years.
Japan has a long history of high-quality guitar building. Little has changed in terms of their manufacturing and quality control over the years. Many guitars made in this country can be compared—and even beat—others made in the US.
Winner: Fender JV Modified '60s Stratocaster
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone has a Ivory Tusq nut. Ivory used to be considered the best material for guitar nuts due to its beauty, durability, and the rich harmonics and sustain you could get from a guitar with it. However, the way to obtain it is simply unethical. Enter TUSQ ivory nuts, which are made synthetically to imitate ivory. Technically, it's better than ivory because it is consistent piece-to-piece, while natural materials can vary a lot, even if they're made from the same.
On the other hand, the Fender JV Modified '60s Stratocaster comes with a Bone nut. It's a type of nut found in high-quality instruments. They sound similar to Ivory since they give a lot of sustain and a bright sound (at least when striking open strings). The only problem they can run into is that you may get a bone piece that simply doesn't sound as well as others because that's just how natural materials are.
Winner: Tie.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone's brige is a Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
On the other hand, the Fender JV Modified '60s Stratocaster's is a Tremolo. Tremolo bridges give you more versatility than fixed bridges. They let you perform the intense vibrato effects that would be impossible with a fixed bridge. However, since the bridge floats and there's less contact with the body, the strings lose sustain slightly faster. They can also be a bit harder to restring and set up correctly than fixed bridges.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
They both have locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Fender JV Modified '60s Stratocaster comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Jackson Pro Plus XT Soloist SLAT HT6 Baritone.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Jackson Pro Plus XT Soloist SLAT HT6 Baritone
- Locking Tuners
- Expensive Wood
- Ivory Tusq Nut
- Top Brand Pickups
- Neck-Through Build
- Killswitch Pickups
- Luminescent Inlay
- Compound Radius Fretboard
- Strap Lock
- Cheap Fret Wire (NS)
- Made in Indonesia
- No Weight Relief
- No Tremolo
- No 21:1 Tuner Ratio
Fender JV Modified '60s Stratocaster
- Locking Tuners
- Made in Japan
- Bone Nut
- Top Brand Pickups
- Parallel Split Pickups
- Tremolo
- Cheap Fret Wire (NS)
- No Expensive Woods
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, the Jackson Pro Plus XT Soloist SLAT HT6 Baritone has the wider nut with 42.9mm (1.688'') vs 41.9mm (1.65''). This is a 1mm (0.038'') difference
This means that it will be more difficult to do bar chords on the Jackson Pro Plus XT Soloist SLAT HT6 Baritone, especially closer to the nut. However, it's also easier to play without muting strings accidently. This favors people with big hands.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone has the longest scale: 27". The Fender JV Modified '60s Stratocaster is only 25.5" long. This is a 1.5'' (38.1mm) scale length difference.
This longer scale means that the strings need more tension to get in tune. This is good if you want to avoid fret buzz, which can happen when the strings are too loose and touch the frets while vibrating. This is especially important when playing in lower tunings. This will also let you reduce the gap between fretboard and strings (low action) to make them easier to press down. However, this higher tension will also make it harder to perform bends and vibratos as the strings will feel stiffer.
This also means that the frets have a longer separation between each other, so this will make it harder for people with smaller hands when playing some chord positions.
Another characteristic of a longer scale is that it makes the guitar sound 'snappier' or brighter. This is due to the extra separation between harmonics and overtones produced by the tension. This influences tone more than any other factor (except the pickups).
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
The Fender JV Modified '60s Stratocaster, on the other hand, has a V neck. This neck shape was more common during Fender's early years. Some people like it because they use their thumb over the edge of the fretboard to press the lower strings. It's rather thicker than most modern necks, so it's not usually used for playing fast solos.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
In this case, the Jackson Pro Plus XT Soloist SLAT HT6 Baritone is the only one with a compound radius. This is a huge win because it will give you the best of both worlds: a more curved radius in the first few frets for chords, and flatter as you come closer to the body for soloing.
Fret Size
The Jackson Pro Plus XT Soloist SLAT HT6 Baritone has Jumbo frets, which should be taller than the Fender JV Modified '60s Stratocaster's Medium Jumbo frets.
Some people prefer taller frets because they result in more sustain since the strings get pressed cleanly without interference from the fretboard. However, if they're too tall—like Jumbo frets—, you might change the pitch of the strings accidentally if you press too hard because you won't be touching the fretboard with your fingers. This is also why some guitarists with a heavy grip prefer smaller frets. They like to feel the fingerboard to avoid pressing down too hard and getting out of pitch.
