Jackson American Series Soloist SL3 vs USA Signature Phil Collen PC1 Satin Stain
Reasons to Get
Jackson American Series Soloist SL3 over USA Signature Phil Collen PC1 Satin Stain
Reasons to Get
Jackson USA Signature Phil Collen PC1 Satin Stain over American Series Soloist SL3
Other Key Differences
Jackson American Series Soloist SL3 vs USA Signature Phil Collen PC1 Satin Stain
Shared Features
Jackson American Series Soloist SL3 vs USA Signature Phil Collen PC1 Satin Stain
Common Strengths
- High-Quality Nut
- Compound Radius Fretboard
- From a High-Quality-Standards Country
- Top Pickup Brand
- Expensive Wood
Common Weaknesses
- Weight Relief
- Stays in Tune (Evertune)
- High-Quality Frets
- 21:1 Tuner Ratio
- Active/Passive Preamp
Table of Contents
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Which One is Better Overall?
After going through our comparison algorithm, the results show that the Jackson American Series Soloist SL3 is probably the better product overall with its final score of 81 compared to the Jackson USA Signature Phil Collen PC1 Satin Stain's 79 score, although not by a lot.
The Jackson American Series Soloist SL3 wins when it comes to playability, build quality, value for the money. On the other hand, the Jackson USA Signature Phil Collen PC1 Satin Stain has the upper hand when it comes to sound.
If you got small hands, you'll probably feel more comfortable playing the Jackson American Series Soloist SL3.
Which One is Better for Beginners?
If you're looking for your first guitar to learn how to play, the Jackson American Series Soloist SL3 is the better choice.
The Jackson American Series Soloist SL3 meets 5 out of our 8 criteria items for beginner friendliness, while the Jackson USA Signature Phil Collen PC1 Satin Stain meets only 3. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players.
New Player Friendliness
Jackson American Series Soloist SL3- Comfortable shape
- Locking tuners
- Comfortable fretboard
- Tall frets
- Comfortable neck
- Narrow nut
- Short scale
- Easy-to-use bridge
New Player Friendliness
Jackson USA Signature Phil Collen PC1 Satin Stain- Comfortable shape
- Comfortable fretboard
- Tall frets
- Narrow nut
- Short scale
- Comfortable neck
- Locking tuners
- Easy-to-use bridge
Nevertheless, when it comes to choosing an instrument, you should pick the one more compatible with your personal style. Still, below we'll try you to give you our results as objectively as it's possible to help you decide.
Jackson American Series Soloist SL3 Overview
- From Jackson's 2022 American series
- Made in United States
- 6 strings
- 25.5"'' scale
- 12" to 16" Fretboard Radius
- Alder body
- 3-piece Maple neck
- Ebony fretboard
- Bridge pickup: Seymour Duncan JB TB-4 (Humbucker/Passive)
- Middle pickup: Seymour Duncan Custom Flat Strat SSL-6 RWRP (Single Coil/Passive)
- Neck pickup: Seymour Duncan Custom Flat Strat SSL-6 (Single Coil/Passive)
- 1 volume and 1 tone Dome knobs
- 5-way Switch
- Floyd Rose 1500 Series Double-Locking Tremolo bridge
- Jackson Standard Neck-Through neck
- 24 Jumbo frets
- Gotoh MG-T Locking tuners
- Weight between 8.05lbs (3.7kgs) and 8.25lbs (3.7kgs)
- Compare Specs >
Jackson USA Signature Phil Collen PC1 Satin Stain Overview
- From Jackson's 2016 Artist Signature series
- Phil Collen Signature
- Made in United States
- 6 strings
- 25.5"'' scale
- 12" to 16" Fretboard Radius
- 1/8 Quilt Maple top
- Caramelized Mahogany body
- Quartersawn Caramelized Flame Maple neck
- Caramelized Flame Maple fretboard
- Bridge pickup: DiMarzio Super 3 DP152 (Humbucker/Passive)
- Middle pickup: DiMarzio HS-2 DP116 (Single Coil/Passive)
- Neck pickup: PC1 Sustainer Driver (Single Coil/Active)
- 1 volume and 1 tone Dome knobs
- 5-way Switch
- Floyd Rose Original Double-Locking Tremolo bridge
- Phil Collen PC1 Bolt-On neck
- 24 Jumbo frets
- Jackson Sealed Die-Cast tuners
- Compare Specs >
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in the Jackson American Series Soloist SL3
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Ebony is a high-end wood, so it is not cheap. It's only used for fretboards because it's also very heavy. It does an excellent job as a durable material while looking elegant. Find out more about Ebony.
Alder is the most popular wood that Fender uses in most of their guitars nowadays. Even though they say it's because of its balanced tone with an emphasis in the upper midrange, it probably is because it isn't too expensive, and it's also pretty lightweight—more than Mahogany. Find out more about Alder.
Woods Used in the Jackson USA Signature Phil Collen PC1 Satin Stain
This wood has beautiful patterns only found in specific types of maple.
Mahogany is a fairly rare wood nowadays. It's used mostly for bodies due to its relatively lightweight. Gibson popularized it with their Les Paul guitars during their golden years, so this wood has a lot of good reputation behind it. The most expensive type comes from South America and it's still used by Gibson even today. Find out more about Mahogany.
Winner: Jackson USA Signature Phil Collen PC1 Satin Stain.
Pickup Configuration
Both pickup configurations are HSS. HSS provides a great balance if you like to play with a lot of distortion, but also love to use clean tones. You'll get a lot of output at the bridge position, but you'll be able to play bright clean tones at the other positions.
Pickups Quality
Both come with very good pickups from at least one of the specialized brands in the market. With pickups like these, you probably won't need an upgrade anytime soon.
You can purchase similar pickups to the Jackson American Series Soloist SL3's and use them on any guitar:
We found the same or similar pickups to the Jackson USA Signature Phil Collen PC1 Satin Stain's online:
The Jackson American Series Soloist SL3's pickups are Passive while the Jackson USA Signature Phil Collen PC1 Satin Stain's are Active.
Passive pickups are what most guitars use. These have a normal output that works well for most genres. However, Active pickups are the preferred choice of heavy metal players because they offer extra output thanks to their 9v battery, which results in a heavier, more distorted sound. Bear in mind that achieving a completely clean tone with them won't be easy. So if you want to also use clean tones, you might want to avoid Active pickups.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Jackson USA Signature Phil Collen PC1 Satin Stain comes with some kind of pickup modification: Sustainer.
The pickups with Sustainer are able to recreate the 'feedback' you get when you hold your guitar near a speaker without muting the strings. This allows them to produce infinite sustain that you can use for as long as you want to create interest sounds and harmonics.
They both share the following switching options:
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Jackson USA Signature Phil Collen PC1 Satin Stain.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Jackson American Series Soloist SL3 compares to the Jackson USA Signature Phil Collen PC1 Satin Stain.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in United States.
The United States is considered one of the best electric guitar manufacturers in the world. A guitar made in this country is supposed to have world-class quality control. Nowadays, guitars made in other countries can beat some of the ones made in the US, but most of the time, this country offers the best you can get. Of course, that comes at a price.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Locking nuts. Instead of a regular nut, this guitar has a locking system that will lock down the strings at the nut, preventing it from getting out of tune. It removes one of the disadvantages of tremolo bridges, tune stability.
However, only the Jackson USA Signature Phil Collen PC1 Satin Stain has a retainer bar for the locking nut, which is a helpful addition. Without it, the Jackson American Series Soloist SL3's strings will change pitch once you lock down the nut, so you'll have to make more micro-adjustments at the bridge to tune it correctly.
Winner: Jackson USA Signature Phil Collen PC1 Satin Stain.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Floyd Rose. This is a double-locking bridge system that allows you to perform techniques like dive bombs and pinch harmonics. The locking nut allows your guitar to stay in tune even after the most intense tremolo usage. The disadvantage is that it takes more work to change the strings and set up everything correctly.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
The Jackson American Series Soloist SL3 has the best tuners of the two because they are locking tuners. They'll help to keep your guitar in tune because they allow you to tune it without wrapping the strings around the posts. This avoids variations in the tuning due to the strings changing position at the post after a bend. They come at the disadvantage of being slightly heavier than regular tuners. Also, it makes it a lot easier to restring.
Nevertheless, the Jackson American Series Soloist SL3 has a locking nut, so it should have even better tune stability and doesn't need locking tuners.
Winner: Jackson American Series Soloist SL3.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Jackson American Series Soloist SL3 has a Neck-Through neck joint. This neck is a lot more resistant and lets builders give the neck joint a more comfortable shape for soloing at the upper frets. The disadvantage is that they're more expensive and that if you damage your neck, you can't simply replace it like with bolt-on necks.
On the other hand, the Jackson USA Signature Phil Collen PC1 Satin Stain comes with Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
Winner: Jackson American Series Soloist SL3.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Jackson American Series Soloist SL3
- Locking Tuners
- Made in United States
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Neck-Through Build
- Luminescent Inlay
- Tremolo
- Compound Radius Fretboard
- Strap Lock
- Cheap Fret Wire (NS)
- No Push Knob or Extra Switch Option
- No Weight Relief
- No 21:1 Tuner Ratio
- No Retainer Bar
Jackson USA Signature Phil Collen PC1 Satin Stain
- Made in United States
- Expensive Wood
- Locking Nut
- Top Brand Pickups
- Sustainer Pickups
- Tremolo
- Compound Radius Fretboard
- Retainer Bar
- Cheap Fret Wire (NS)
- No Locking Tuners
- No Neck-Through Build
- No Weight Relief
- No Luminescent Inlay
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 42.9mm (1.688'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 25.5".
This is the scale used in most Stratocasters. It's slightly longer than the typical 24.75'' size found in Les Pauls, and it's one of the main reasons why Stratocasters have such a bright sound in general. A longer scale also means that the strings will have higher tension. This will help you get lower action without suffering fret buzz, which will also be helpful when playing in lower tunings without having to increase your string gauge.
However, this also means that there will be more separation between frets, which can make it more difficult to play. Also, bending the strings will require more strengths due to the increased tension, but remember that a tremolo guitar will offset this difficulty.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
In this case, both have different neck shapes:
The Jackson American Series Soloist SL3 has a D type of neck. This is a thin and flat neck that is made for playing fast. If you prefer a neck that doesn't get in your way when soloing, this is the shape you should use. Guitarists that prefer to have a bit more grip won't like this type of neck.
The Jackson USA Signature Phil Collen PC1 Satin Stain, on the other hand, has a Vintage neck. This means that it's thicker than most modern necks, and makes it a better fit for playing chords and slow solos. Some people prefer this type of neck because it gives them a better grip thanks to the extra mass. Still, the vast majority prefer a thinner, faster, and more ''modern'' neck.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both have a compound radius. This means both offer you the best craftsmanship when it comes to fretboard design. You'll have an arc to help you play chords close to the nut, while also having a flat design at the higher frets for faster soloing and easier bends.
Hand Size Comfortability
Everyone has a different hand size, and that's why it's recommended to try a guitar before buying, even if others tell you that it's comfortable to play. However, we can know whether a guitar favors small or large hands just by knowing its exact measurements.
And after taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that the Jackson USA Signature Phil Collen PC1 Satin Stain favors large hands more than the Jackson American Series Soloist SL3.
Jackson American Series Soloist SL3:
Jackson USA Signature Phil Collen PC1 Satin Stain:
Fret Size
Both have a Jumbo fret size. This is one of the tallest frets you can get. You won't feel the fretboard when pressing down the strings. It will give you the best sustain and all types of chords will be easier to play. However, you can end up changing the pitch of your notes if you press too hard, which is something people used to feeling the fretboard do when trying Jumbo frets for the first time.
