Show Full Spec Comparison
| Ibanez GAX30 | AR520H | |
|---|---|---|
| General | ||
| Brand: | Ibanez | Ibanez |
| Year: | 2020 | 2021 |
| Configuration: | HH | HH |
| Strings: | 6 | 6 |
| Made in: | China | China |
| Series: | AX | AR |
| Colors: | Red | Black |
| Left-Handed Version: | No | No |
| Body | ||
| Type: | Solid Body | Semi-Hollow |
| Body Material: | Basswood | Maple |
| Bridge: | Gibraltar Performer | Gibraltar Performer |
| Neck | ||
| Neck Joint: | Bolt-On | Set |
| Tuners: | Ibanez | Ibanez |
| Fretboard: | Jatoba | Bound Jatoba |
| Neck Material: | Maple | 3pc Maple |
| Decoration: | White block | Acrylic & Abalone block |
| Scale Size: | 24.75" | 24.75" |
| Shape: | GAX | AR |
| Thickness: | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) | 1st Fret: 0.79'' (20.1mm) - 12th Fret: 0.87'' (22.1mm) |
| Frets: | 22 Medium Nickel Silver | 22 Medium Nickel Silver |
| Fretboard Radius: | 12" | 12" |
| Nut: | Plastic | Plastic |
| Nut Width: | 43mm (1.693'') | 43mm (1.693'') |
| Electronics | ||
| Bridge Pickups: | Infinity R (Humbucker / Passive) | Super 58 (Humbucker / Passive) |
| Middle Pickup: | ||
| Neck Pickup: | Infinity R (Humbucker / Passive) | Super 58 (Humbucker / Passive) |
| Switch: | 3 Way | 3 Way |
| Knobs: | Speed | Speed |
| Pickup Mods: | None | Tri-Sound |
| Volume Controls: | 1 | 1 |
| Tone Controls: | 1 | 1 |
| Hardware | ||
| Strap Lock: | No | No |
| Hardware Color: | Chrome | Gold |
Show Diagrams Comparison
Reasons to Get
Ibanez GAX30 over AR520H
Reasons to Get
Ibanez AR520H over GAX30
Other Key Differences
Ibanez GAX30 vs AR520H
Shared Features
Ibanez GAX30 vs AR520H
Common Strengths
- From a High-Quality-Standards Country
Common Weaknesses
- Locking Tuners
- Stays in Tune (Evertune)
- High-Quality Nut
- High-Quality Frets
- Compound Radius Fretboard
- Luminescent Sidedots
- Strap Lock
- Top Pickup Brand
- Expensive Wood
- 21:1 Tuner Ratio
- Active/Passive Preamp
Price History Comparison
These are affiliate links. We may earn a fee if you purchase after clicking. These prices are prone to error. Make sure you're buying the right product after clicking on a link from our site. We are not liable if you buy the wrong product after following these links. As an Amazon Associate site we earn from qualifying purchases.
Hand Size Comfortability
After taking into account the scale length, nut width, neck profile and fretboard radius, we can conclude that both favor small hands .
Ibanez GAX30:
Ibanez AR520H:
Beginner Friendliness
Both meet 75 out of our 8 criteria items for beginner friendliness. This takes into account the type of frets, scale length, nut width, bridge type, fretboard radius, and neck profile to determine the easiest combination for new players. If you're looking for your first guitar to learn how to play, you can't go wrong with either of them.
New Player Friendliness
Ibanez GAX30- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
New Player Friendliness
Ibanez AR520H- Comfortable shape
- Easy-to-use bridge
- Tall frets
- Comfortable neck
- Comfortable fretboard
- Narrow nut
- Short scale
- Locking tuners
Sound Quality Comparison
The wood used in an electric guitar or bass is not as important to determine the final tone. However, some people prefer specific wood types, so we'll take a look at those first. Then, we'll take a look at the electronics to determine the versatility and sound quality of each instrument.
Woods Used in Both
Maple is one of the most popular necks for good reasons. It is a strong wood that is relatively cheap to make and looks beautiful. The highest quality maple is the hardest that comes from North America. Find out more about Maple.
Jatoba is a hard and dense wood that emphasizes the mid-lows, giving a fuller, more round sound than, for example, Mahogany. However, it also has a lot of clarity in the top end. Find out more about Jatoba.
Woods Used in the Ibanez GAX30
Basswood is a lightweight type of wood that isn't as expensive as other popular choices for guitar building. It gives more power to the mid-range frequencies. Its color can vary from pale white to light brown. Find out more about Basswood.
Winner: Tie.
Pickup Configuration
Both pickup configurations are HH. Double Humbucker (HH) is the choice for people who want a fuller, more round sound with tons of mids and lows. Humbuckers also get rid of the hum noise that plague single-coil pickups. They can work out for almost any genre going from Djent to even Jazz.
Pickups Quality
None of these use a specialized pickup brand for their pickups. Some of the best guitars on the market come with pickups from brands like EMG, Seymour Duncan, DiMarzio, etc. You might want to replace your pickups eventually if you want to get the best sound out of any of these instruments.
Both use Passive pickups. This is what's used for most music genres. They have a regular output and will serve you for both high-gain and clean tones. The alternative (Active pickups) offer a higher output that is mostly used for heavy music.
Winner: Tie.
Versatility Comparison
Some instruments offer you more ways to explore your creativity than others. Below you'll find how both compare when it comes to versatility.
Switch Options
Both are equal when it comes to the pickup switching option.
Only the Ibanez AR520H comes with some kind of pickup modification: Tri-Sound.
Tri-Sound gives you the choice of using the pickup coils at the same time, splitting them or connect them im parallel for a brighter sound.
When evaluating versatility, we also take into consideration bridge and neck joint type, number of frets, switch options, amount of pickups and more.
Winner: Ibanez AR520H.
Final Sound Quality Scores
Build Quality Comparison
When it comes to build quality, we like to take into account everything used to build the instrument. This includes materials, hardware and the quality control expected depending on the country where it was built. Let's see how the Ibanez GAX30 compares to the Ibanez AR520H.
Country of Origin
The manufacturing country can tell a lot about the build quality of an instrument. Both in this comparison where made in China.
China has a bad reputation when it comes to building quality. However, times have changed and now respectable brands use China's cheap labor to build good instruments for a lower price. Don't discount a guitar only because it was built in China, but also expect more quality from countries like Korea.
Winner: Tie
Nut Material
If you want your guitar to stay in tune and sound good, you need a well cut nut. Nut quality can be inconsistent even when comparing two copies of the same model. The best way to make sure you're nut will be well done is by getting a nut made by an expert company like TUSQ or Micarta.
In this case, both have Plastic nuts. This is a low-quality nut that you might want to consider upgrading soon. Bone and TUSQ nuts are the best for guitars with a fixed or simple tremolo bridge.
Fret Material
Most fret wire is made of nickel silver. This material eventually wears down after a lot of use and most instruments end up needing a complete fret replacement. However, some expensive models come with stainless steel frets. This is what you should aim for if you can afford it.
Unfortunately, none of them come with stainless steel frets.
Winner: Tie.
Bridge
The perfect bridge for you will depend on your playstyle because they all have advantages and disadvantages. However, some bridges are more expensive—like Floyd Roses and Evertunes—and thus add more value to a guitar.
Both come with a similar bridge: Fixed. It's a simple bridge that is very beginner-friendly since it doesn't require any set-up. You can swap strings easily. It might also give more sustain since it doesn't have complex moving parts that make the strings lose vibration. However, it doesn't have the same versatility as a tremolo bridge.
Since we need to be objective, the most expensive type of bridge will be the winner of this section. In the end, this doesn't matter if you're not going to use the bridge for its original purpose, so choose the bridge that fits your playing style better.
Winner: Tie.
Tuners
Both come with regular tuners. Both come with Ibanez.
Winner: Tie.
Neck Joint
Contrary to popular belief, the difference in sustain and tone that some neck joints give to a guitar is simply unperceivable—if they're all well built. However, some of them do have advantages over the others.
The Ibanez GAX30 has a Bolt-On neck joint. This neck is joined to the body by 4 bolts that you can simply unscrew. This allows you to replace the neck or take it off for travel. It's the most common and cheapest way to build a guitar.
On the other hand, the Ibanez AR520H comes with Set neck joint. This neck is tightly glued to the body. They give you the least versatility because you can't swap them for a neck that fits your hand better if you want to, unlike bolt-on necks. Some people think this gives more resonance and sustain, but there's no real difference if the bolt-on joint is well built.
Winner: Ibanez GAX30.
Here is the list of features that were considered when choosing the winner in the Features subcategory:
Ibanez GAX30
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Expensive Woods
- No High-Quality Nut
- No Top Brand Pickups
- No Neck-Through Build
- No Push Knob or Extra Switch Option
- No Weight Relief
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Ibanez AR520H
- Tri-Sound Pickups
- Cheap Fret Wire (NS)
- No Locking Tuners
- Made in China
- No Expensive Woods
- No High-Quality Nut
- No Top Brand Pickups
- No Neck-Through Build
- No Luminescent Inlay
- No Tremolo
- No Compound Radius Fretboard
- No 21:1 Tuner Ratio
- No Strap Lock
Final Build Quality Scores
Playability Comparison
Let's now compare their playability. Bear in mind that the instrument will feel different depending on your hand size and play style. That's why you should always test before buying. But if you can't or want a second opinion on it, we can still take a look at each of the important measurements of the instrument for you. This way, we can predict how easy a guitar might be to play, or how different it will feel compared to the other.
Remember that, even though the difference might seem small, every inch counts when it comes to feeling of the instrument in your hands. Any variation can completely change how comfortable a guitar feels in your hands.
Nut Width
The nut width will affect the separation between strings at the nut. In this comparison, both have a nut width of 43mm (1.693'').
This is within the most common range of nut widths for a 6-string guitar. It offers a good balance of string separation at the nut. It's the size that most guitarists prefer as it gives them just enough space to play open chords without muting the strings, but without spreading the strings too wide and making bar chords difficult to perform.
Scale Length
The scale length is one of the things that influences playability the most. This is the distance between the nut and the bridge and will affect everything from low action allowance, difficulty to perform bends, fret separation, and even tone.
In this case, both have a scale length of 24.75".
This is the scale length that Gibson uses for most of its Les Paul guitars. It's a smaller scale than the typical Stratocaster's 25.5''. Short scale lengths like this make it easier to bend the strings, which is pretty important if you have a fixed bridge. They also have a shorter fret separation, which makes it easier to change position fast at the fretboard.
On the other hand, a shorter scale like this one will make fret buzz more likely, which can affect you if you want to use thicker string gauges.
Lastly, remember that you can also affect the tension of the strings by changing your string gauge. You can use a thicker gauge for more tension and a lighter one for less tension.
Neck Profile
No single neck shape is better than others. However, most people tend to prefer a thinner necks because it doesn't get in their way when playing fast and most hand sizes can adapt to it pretty well. However, some people still prefer thicker necks for a better grip, especially if they have big hands.
Both the Ibanez GAX30 and the Ibanez AR520H have a SA-shaped neck. Like most Ibanez necks, it's thinner than most modern C necks. It's very similar in thickness and shape to their unique Wizard profile.
Fretboard Radius
Most guitar fretboards are not flat; they usually have a curve or arc across their width. A curved fretboard will make it easier to perform chords without muting strings, while a flatter one will make it easier to play single notes, which is good for bending and soloing in general. The best fretboards have a compound radius that varies across the fingerboard, but they're not common since they take a lot more work to build.
Both the Ibanez GAX30 and the Ibanez AR520H have the same fretboard radius of 12". This is the radius used in most Gibson guitars. It gives you a good balance for playing chords without muting, but also good comfortability for playing single notes and bending.
Fret Size
Both have a Medium fret size. If you like feeling the fretboard when you play, but also appreciate some easiness to press down the frets, this size offers a good balance for that.
